


|
|
Home > Products >
Pipe and Tubing Tools
> Pipe/Tube Cutting & Preparation
> Power Pipe Cutters
> 258 Power Pipe Cutter
|
 |
Model 258 Power Pipe Cutter |
 |
|
|
|
2 1/2" to 8" Diameter Pipe
The RIDGID Model 258 Power Pipe Cutter cuts 21/2" to 8" schedule 10*/40
steel pipe, galvanized pipe, rigid conduit etc. at the job site or in the shop.
Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement
cutter that provides square cuts. The operator controls the feeding rate
by pumping the hydraulic foot pump throughout the operation. A square
cut with minimal burr on either 21' or nipple lengths of pipe is achieved
quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID
Pipe Roller for Beveling can be used to rotate the pipe while a second
operator uses a grinder to bevel the pipe.
 |
Square cut 21' or nipple lengths of pipe without effort. |
 |
Easily cuts by displacing instead of removing pipe material. |
 |
No abrasive dust, dangerous sparks, or open flame. |
 |
Quickly cuts steel pipe with minimal burr. |
 |
Great for cutting pipe for groove joining. |
 |
Heavy-duty design is perfect for field or shop use. |
 |
Adaptable for beveling. |
|
 |
Cutting Capacity: Model 258 21/2" to 8" schedule. |
 |
10*/40 steel pipe. |
 |
Model 700 Power Drive. |
 |
Power Drive RPM: 33 (no load). |
 |
Weight: 105 lbs. (excludes No. 700 Power Drive) |
|
 |
One (1) RIDGID 774 Square Drive Adapter. |
 |
One (1) 8 1/2" HD Cutter Wheel Assembly. |
 |
One (1) Hydraulic Ram and Foot Pump. |
 |
Two (2) 2 1/2" to 12" Ball Transfer Pipe Supports. |
* Use the thin cutter wheel for best results. ** Cutting time varies with pipe schedule and diameter. Note: Models 258 and 258XL are not recommended to cut cast iron pipe. For optimum wheel life always properly support the work piece with pipe supports. |
|
|
|
|
| Cat. No. |
Model No. |
Description |
Weight |
| lb. |
kg |
| 50767 |
258 |
2 1/2"-8" Pipe Cutter |
105 |
48 |
| 58227 |
258-XL |
8"-12" Pipe Cutter |
140 |
63 |
| Cat. No. |
Model No. |
Description |
Weight |
| lb. |
kg |
| 66687 |
- |
8 1/2" H-D Cutter Wheel Assembly (includes HD Cutter Wheel, hub w/pins, cover plate) |
13 |
5.9 |
| 50812 |
E-258 |
8 1/2" H-D Cutter Wheel only |
2 |
1 |
| 58222 |
E258-T |
8 1/2" Thin Wall Cutter Wheel Only (PVC and Steel) |
2 |
1 |
| 54397 |
- |
Transport Cart |
24 |
11 |
| 60002 |
258PS |
Pipe Support 2 1/2"-12" |
7 |
3.1 |
| 60007 |
- |
Replacement Ball Transfer Head Set |
5 1/2 |
2.5 |
| 61757 |
- |
Pipe Roller for Beveling (for Model 258 only) |
13 |
6 |
|
|
|
|