RIDGID RIDGID Products RIDGID Support RIDGID Forum Where to Buy RIDGID About Ridge Tool Company








Join our mailing list!

Privacy Policy




Model 300 Power Drive
Model 300
Owner's Manual Parts List Where To Buy Service Center Print Page


Features
RIDGID speed chuck.
Reversible 1/2 HP universal motor.
Capacity: 1/8"-2" (3mm-50mm) pipe, 2 1/4"-4" with 141, and 4"-6" with 161 Geared Threaders; 1/4"-2" (6mm-50mm) rod.
Recessed On/Off/Reverse switch.
CSA approved.
Approved to UL standards (NRTLC).

Specifications
Motor: 1/2 HP, universal, reversible motor, single-phase, 25-60 Hz, 115V (230V available).
Switch: Heavy-duty FOR/OFF/REV and Integral Foot Switch.
Chuck: RIDGID speed chuck with replaceable rocker-action jaws.
Spindle Speed: 38 RPM (57 RPM available).
Rear Centering Device: Cam-action turns with chuck.
Support Bar: Heavy-duty (2).

Model 300 Power Drive Complete Consists of:

  • 300 Power Drive only with foot switch
  • 1206 Stand
  • 311 Carriage with lever
  • 341 Reamer
  • 360 Cutter
  • 811A Universal die head
  • Set 1/2" - 3/4" Universal alloy dies
  • Set 1" - 2" Universal alloy dies
  • 32 Transporter
  • 418 Oiler
  • 1 gallon Nu-Clear thread cutting oil
  
Model 300


Ordering Information
Cat. No. Model No. Description Spindle Speed RPM Pipe Threading Capacity Rod Threading Capacity Max. Geared Threader Capacity Weight
in. mm in. mm in. mm lb. kg
15682 300 Complete 115V, 25-60 Hz (NPT) 38 1/8-2 3-50 1/4-2 6-50 6 150 212 96.2
15722 300 Complete 115V, 25-60 Hz (NPT) 57 1/8-2 3-50 1/4-1 1/2 6-40 6 150 212 96.2
41855 300 Only 115V, 25-60 Hz 38 1/8-2 3-50 1/4-2 6-50 6 150 94 43.0
75075 300 Only 115V, 25-60 Hz 57 1/8-2 3-50 1/4-1 1/2 6-40 6 150 94 43.0
41860 300 Only 230V, 25-60 Hz 38 1/8-2 3-50 1/4-1 1/2 6-40 6 150 94 43.0
75435 300 Only 230V, 25-60 Hz Export 38 1/8-2 3-50 ¼-2 6-50 6 150 94 43.0
97415 300A Complete 230V, (NPT) Export 38 1/8-2 3-50 1/4-2 6-50 6 150 202 91.6
97420 300A Complete 230V, (BSPT) Export 38 1/8-2 3-50 1/4-2 6-50 6 150 202 91.6
Other voltages available upon request. Export machines equipped with special power cord sets.
300A Complete consists of 300PD, 1206 Stand, 311A Carriage, 341 Reamer, 360 Cutter, 330 Oil Pan, 811A Die Head with 1/2"-3/4" and 1"-2" Universal Dies.

Accessories
Cat. No. Model No. Accessories Description Weight
lb. kg
42360 1206 Stand for 300 Power Drive 31 14.1
83540 1206 Stand for 300 Power Drive Export 31 14.1
42575 32 Transporter (for Power Drives and Tristand Vises) 14 1/4 6.5
68815 311 Carriage with No. 312 Lever 15 6.8
42385 312 Carriage Feed Lever 3 1.4
10883 418 Oiler with 1 gallon of Nu-Clear Thread Cutting Oil 20 1/2 9.4
42365 341 Reamer for No. 311 Carriage with Lever 7 3.2
42370 360 Cutter for No. 311 Carriage 8 1/2 3.9
97065 811A Universal Q.O. Die Head Only, Right-Hand Only 12 1/2 5.7
97075 815A Self-Opening Die Head Only, Right-Hand Only 13 1/2 6.1
51005 819 Nipple Chuck Complete, 1/2"-2" (12mm-50mm) 10 1/2 4.8
42380 1452 Clip-On Tool Tray 6 2.7
97345 304* Retrofi t Kit (38 rpm) 37 3/4 17.1
97350 304* Retrofi t Kit (57 rpm) 37 3/4 17.1
97365 - Jaw Inserts for Coated Pipe 1/2 0.2
46660 E-863 LH/RH Reamer Cone 7 3.2
41620 - Gearhead Motor Grease 1 0.5
WHERE TO BUY  •  ONLINE VENDORS  •  RIDGID FORUM  •  VISITOR REGISTRATION  •  SITEMAP  •  CONTACT US
© 2008 RIDGID, All Rights Reserved  •  1-800-4-RIDGID  •  Privacy Policy