 |
Model 320-E Pressing Tool For Use With Standard Series Jaws
|
 |
|
|
|
This battery-operated tool combines large capacity fitting capability with reduced size and weight. It features a barrel that swivels 90 degrees to
enable access to hard-to-reach areas. A jaw closure sensor alerts the operator to jaw obstructions or incomplete cycles caused by low battery life, ensuring a reliable, watertight joint every time.
 |
It’s Fast!
Tool completes connection in seconds, cutting total installation time in half versus soldering. |
|
Reliable, Watertight connections every time. |
|
Lightweight tool
for easy handling. |
|
90° Swivel Barrel
allows you to work around obstructions. |
|
Tool Readiness Alert
lets you know you can make a complete pressed connection. |
|
Error Alerts
let you know of jaw obstructions or a low battery. |
|
Tool Service Alert
for tool recalibration. |
|
Capacity
to handle 1/2" up to 4" copper tubing. |
|
14.4V (2.6Ah) Ni-MH Battery
allows 30% more work per charge versus NiCad; compatible with RIDGID Model 100-B Compact Battery Pressing Tool. |
|
Compatible With:
RIDGID-Viega ProPress® System (copper)
NIBCO® Press System™ (copper)
Elkhart Products Corporation XPRESS™ (copper)
Viega PureFlow™ System (PEX) |
|
| Batteries | 14.4V, 2.6Ah, Ni-MH Makita |
| Weight | 10.5 lbs. (without jaws) |
| Ram Force | 7,200 lbs. (32kN) |
| Tool Operating Temp. Range | 24°F to 122°F
|
| Approx. Cycle Time | 7 seconds |
|
Model 320-E Pressing Tool, 2 Batteries, Battery Charger and Carrying Case, |
|
|
|
| Cat. No. |
Model No. |
Description |
Weight
lb. |
Std. Pack |
| 12143 |
320-E |
1/2” to 2” Jaw Sets for ProPress |
59 3/4 |
1 |
| 12148 |
320-E |
1/2” to 1” Jaw Sets for ProPress |
66 |
1 |
| 12153 |
320-E |
Kit without Jaw Sets |
53 |
1 |
| Cat. No. |
Model No. |
Description |
Weight
lb. |
Std. Pack |
| 22003 |
320-E |
1/2" to 2" RIDGID SHP Jaw Sets |
59 3/4 |
1 |
| 21993 |
320-E |
1/2" to 1" RIDGID SHP Jaw Sets |
66 |
1 |
| 12153 |
320-E |
Kit without Jaw Sets |
53 |
1 |
| Standard Series Jaws |
3/8" |
1/2" |
5/8" |
3/4" |
1" |
1 1/4" |
1 1/2" |
2" |
1/2" - 2" Jaw Kit w/ Case |
| ProPress (Copper) |
- |
76652 |
- |
76657 |
76662 |
76667 |
76672 |
76677 |
- |
| RIDGID SHP (copper) |
- |
21848 |
- |
21853 |
21858 |
21863 |
21868 |
21873 |
22023 |
| Pureflow (PEX) |
- |
22653 |
22658 |
22663 |
22668 |
22673 |
22678 |
- |
- |
| Cat. No. |
Description |
Weight
lb. |
Std. Pack |
| 16813 |
Carrying Case |
10 |
1 |
| 12683 |
Battery, 14.4V, 2.6 Ah Ni-MH |
3 |
1 |
| 83417 |
115V Battery Charger |
2 1/4 |
1 |
ProPress® is a registered trademark of Viega NA.
PureFlow™ is a trademark of Viega NA. |
|
|
