Find RIDGID on:
Share this page:
|
|
Home > Products >
Pipe and Tubing Tools
> Cutting & Drilling
> Hole Cutting
> HC300 Hole Cutting Tool
|
|
|
HC300 Hole Cutting Tool
Model HC300
|
|
|
The RIDGID Model HC300 Hole Cutting Tool is designed to cut holes up to 3" diameter into steel pipe. The multiple hole size allows the use of fittings such as Mechanical T®, Hookers®, Vic-O-Let™, Weld-O-Let™ and others for branching unpressurized pipelines.
The HC300 features a 1/2" capacity chuck to accommodate all sizes of holes up to 3" diameter and standard hole saw arbors up to 7/16" Hex (1/2" chuck size). An integral motor and gear reduction optimizes the performance and saw life in the capacity range. A single-feed handle and ON/OFF switch allows for easy operation. The compact two-piece design allows the HC300 to be used in tight quarters and difficult-to-reach locations.
The Model HC300 offers great features that translate into unparalleled field and shop performance.
 |
Quick Connecting Two-piece Design. This unique design allows for easy mounting, transport and set up. In addition, weighing only 31 lbs., the unit can be broken down into two lighter weight units for maximum transport and operation comfort. This is particularly useful when working off a ladder or overhead. |
|
Single-hand Chain Latching. The Model HC300 features a springloaded chain that saves time and significantly aids set up and operation. |
|
Ergonomic Design. With all controls at the operator’s fingertips, the tool has been designed for maximum productivity. |
|
High Speed. With a powerful 1.2HP, 11 amp motor, the Model HC300 delivers 360 RPM to quickly bore holes while optimizing hole saw life. |
|
Horizontal and vertical flats to ensure perpendicular cutting. | |
|
Motor: |
Universal, 115V or 230V 25-60Hz 11 amp, 1.2 HP, UL/CSA listed. |
|
RPM: |
360 (no load). |
|
Hole Cutting Capacity: |
up to 3". |
|
Chuck Size: |
1/16"- 1/2". |
|
Pipe Diameter Mounting Range: |
1 1/2" - 8". |
|
Weight: |
31 lbs. |
|
Height: |
12.8". |
|
Length: |
11.9". |
|
Width: |
13.2". |
|
115V approved by CSA to CSA and UL standards.
| |
|
One Hole Cutting Tool (Base and Motor Assembly). |
|
One Chuck Key. | |
|
Hole Saws. |
|
R2S Solid Shank Arbor. |
|
Carrying Case. | |
|
|
|
| Cat. No. |
Model No. |
Description |
Weight |
| lb. |
kg |
| 76777 |
HC300 |
3" Hole Cutting Tool 115V |
31 |
14 |
| 76787 |
HC300 |
3" Hole Cutting Tool 230V |
31 |
14 |
| 76792 |
HC300-J |
3" Hole Cutting Tool 100V, 50/60 Hz
|
31 |
14 |
| 16671 |
R2S |
Solid Shank Arbor |
3/4 |
0.3 |
| 84427 |
- |
HC-450/HC-300 Carrying Case |
19 |
8.6 |
77017
|
- |
Chuck Key
|
1/4
|
0.1
|
Note: The HC300 is not a hot tapping tool.
Note: Use the R2S Arbor when drilling 1 1/4" and larger holes. | |
|
|
|
Products
Support
Forum
Where to Buy
About Us
