Find RIDGID on:
Share this page:
|
|
Home > Products >
Pipe and Tubing Tools
> Cutting & Drilling
> Hole Cutting
> HC450 Hole Cutting Tool
|
|
|
HC450 Hole Cutting Tool
Model HC450
|
|
|
The RIDGID Model HC450 is engineered for continuous 1/4" to 4 3/4" hole
cutting in and up to 8" diameter steel unpressurized pipe. The built-in
level ensures line up for multiple holes when branching lines using
Mechanical T, Vic-O-Let fittings or welded saddles. Dual-side feed handles and
switches provide easier operation from any angle. In addition, the HC450’s
heavy-duty chuck accommodates 1/8" to 5/8" arbors. The HC450 is ideal
for mechanical, industrial maintenance and fire protection contractors
since it cuts holes into a wide variety of pipe materials. No off-the-shelf
drill-based hole cutter compares in performance or durability to the rugged
purposed-built Model 450.
 |
13 amp 1.2 HP worm-gear driven motor delivers unmatched hole cutting power for schedule 10, 40 and 80 pipe. |
|
Engineered for 1/4" to 4 3/4" continuous dry or oiled hole cutting. |
|
Quickly mounts onto 1 1/4" to 8" diameter pipe. |
|
RPM maximizes holesaw life and does not spray lubricant or chips. |
|
Only 11 1/2" high for low clearance jobs. |
|
Dual-side controls provide easy operation. |
|
GFCI and a built-in breaker for operator protection. |
|
Chuck accommodates 1/8" to 5/8" arbors. |
|
Two carrying handles ease mounting and alignment. |
|
Built-in level for multiple hole alignment. |
|
|
Motor: |
Universal, 115V or 220V 25-60Hz 13 amp, 1.2 HP, UL/CSA listed. |
|
RPM: |
110 (no load). |
|
Hole Cutting Capacity: |
up to 4 3/4". |
|
Chuck Size: |
5/8". |
|
Pipe Diameter Mounting Range: |
1 1/4" to 8". |
|
Weight: |
42 lbs. |
|
Height: |
11 1/2". |
|
Length: |
17". |
|
Width: |
17". |
| 115V approved by CSA to CSA and UL standards.
|
|
|
One Hole Cutting Tool. |
|
One 5/8" Arbor only for Hole Saws. |
|
One Chuck Key. |
|
|
|
|
| Cat. No. |
Model No. |
Description |
Weight |
| lb. |
kg |
| 57592 |
HC450 |
4 3/4" Hole Cutting Tool 110V, 50/60 Hhz
|
42.0 |
19.0 |
| 57597 |
HC450 |
4 3/4" Hole Cutting Tool 220V, 50/60 Hhz |
42.0 |
19.0 |
| 57602 |
HC450-J |
4 3/4" Hole Cutting Tool – Japan 100V, 50/60 Hhz |
42.0 |
19.0 |
| Note: The HC450 is not a hot tapping tool. |
| Cat. No. |
Model No. |
Description |
Weight |
| lb. |
kg |
| 84427 |
- |
HC450 Carry Case |
19.0 |
8.6 |
| 59502 |
R4 |
5/8" Arbor only for Hole Saws |
1/4 |
0.1 |
59132
|
-
|
Chuck Key
|
1/4 |
0.1 |
|
|
|
|
Products
Support
Forum
Where to Buy
About Us
