|
|
Home > Products >
Drain Maintenance
> Sectional Machines
> K-1500G Sectional Machine
|
 |
K-1500G Sectional Machine
|
 |
|
|
|
For 2" to 10" (50-250mm) Drain/Sewer Lines
 |
A gasoline engine makes the K-1500G well-suited for cleaning lines in
remote locations where electrical power is unavailable. Cuts through roots
fast. |
|
Unique, easy-to-use, instant-acting cable clutch maximizes operator
control.
– Pull down on the handle and the cable spins at 600 RPM.
– Release frees cable instantly, automatic throttle control idles engine. |
|
Comes equipped to use 11/4" cable to clean 3" to 10" lines through 300
feet (75-250mm, 92m). |
|
6 HP gasoline engine drives cable via four-speed transmission. Allows the
operator to vary the cable spinning speed to fit the application. Forward
speeds of 333, 425 and 500 RPM, and a reverse speed of 250 RPM. |
|
Low-profile, four-wheel cart easily rolls to the job. Guards against
machine upset and possible fuel spillage. |
|
|
Width Wheel to Wheel |
26" |
|
Length Including Kickstand |
28" |
|
Ground to Top of Handle |
38" |
|
Back of Handle to Front |
49" |
|
Ground to Top of Housing Shell |
27" |
|
|
|
|
| Cat. No. |
Model No. |
Description |
Weight |
| lb. |
kg |
| 44587 |
K-1500G |
Machine Only with A-1 Glove, A-12 Coupling Pin Key and A-34-10 Rear Guide Hose |
190 |
86.4 |
| 48462 |
K-1500G w/C-14 |
Machine with Standard Equipment, includes:
– Ten Sections Of C-14 Cable, Total 150 Feet
– Three A-8 Cable Carriers
– A-1 Left-Hand Mitt
– A-12 Coupling Pin Key
– A-34-12 Rear Guide Hose
– A-2864 Hex Key
– A-3516 Hex Key
– A-3 Tool Box
– T-2 Heavy-Duty Straight Auger
– T-4 Heavy-Duty Funnel Auger
– T-6 Retrieving Auger
– T-8 Grease Cutter
– T-13 Sawtooth Cutter
– T-50 Sharktooth Cutter |
|
|
|
|
|
|
