Find RIDGID on:
Share this page:
|
|
Home > Products >
Drain Cleaning
> Sectional Machines
> K-60 Sectional Machine
|
|
|
K-60 Sectional Machine
Model K-60
|
|
|
For 1 1/4" to 4" (32-100mm) Drain Lines
 |
A compact machine for institutional, commercial or residential cleaning.
Also ideal for septic tank vacuum truck operators. Small enough to fit into cramped
spaces, yet powerful enough to clear tough blockages. |
|
Ideal for rooftop vent stacks. Rear handle allows for easy transporting up ladders and onto rooftops. |
|
Unique, easy-to-use, instant-acting cable clutch maximizes
operator control.
– Push handle down, cable spins at 600 RPM.
– Release handle, cable stops instantly, no overrun to kink or damage cable. |
|
Simple adjustment knob allows unit to spin both 7/8" (22mm) and 5/8" (16mm)
diameter cable. Adjusts in seconds.
– 7/8" cable (C-10) cleans 2" to 4" lines through 150 feet.
– 5/8" cable (C-7, C-8, C-9) cleans 1 1/4" to 4" lines through 125 feet. |
|
Remove only two bolts to access jaw set for cleaning or replacement.
Removal of same bolts provides access to belt drive. |
|
Equipped with 1/2 HP motor. |
|
CSA approved. |
|
Approved to UL standards (NRTLC). |
|
|
K-60SP Machine. |
|
A-1 Operator’s Mitt. |
|
A-60-12 Rear Guide Hose. |
|
A-62 Cable Kit, includes:
– A-8 Cable Carrier.
– Five Sections Of C-10, 7/8" Cable, Total 75 Feet. |
|
A-61 Tool Kit, includes:
– T-101 Straight Auger.
– T-102 Funnel Auger.
– T-107 Spade Cutter.
– T-125 Retrieving Auger.
– T-150-1 Sharktooth Cutter.
– A-3 Tool Box.
– A-12 Pin Key. |
|
|
|
|
| Cat. No. |
Model No. |
Description |
Weight |
| 115V |
220-240V |
lb. |
kg |
| 66492 |
66512 |
K-60SP |
Machine with A-1 Operator’s Mitt, A-12 Pin Key, and A-60-12 Rear Guide Hose |
41 |
18.6 |
| 66497 |
66517 |
K-60SP-SE |
Machine with A-1 Operator’s Mitt, A-12 Pin Key, and A-60-12 Rear, Guide Hose, plus: A-61 Tool Kit and A-62 Cable Kit |
92 |
41.7 |
|
|
|
|
Products
Support
Forum
Where to Buy
About Us
