Find RIDGID on:
Share this page:
|
|
Home > Products >
Power Tools
> Bench and Stationary
> Miter Saws
> 10" Miter Saw with Adjustable Laser
|
|
|
10" Miter Saw with Adjustable Laser
R4110
|
|
|
 |
15 Amp Motor –
Heavy duty motor powers through the most difficult cuts
|
|
Extended Bevel and Miter Ranges –
0° to 48° Left bevel and 0° to 50° miter capacities with crown molding stops to accommodate a wide variety of cuts
|
|
Crown Molding Stops –
Rotation stops at most common crown molding angles 0°, 15°, 22.5°, 31.6°, and 45° left and right
|
|
Bevel Stop –
Rotation stops at most common angles 0, 33.9, 45, and 48° L
|
|
Zero Clearance Throat Plate –
Gives material maximum cut-through support
|
|
Sliding Miter Fence –
Provides support for wider material. Adjusts for bevel cuts
|
|
2 ½ in. Dust Port –
Provides connection to standard dust collection systems to help keep work area clean
|
|
Work Clamp with Onboard Storage –
Securely holds material in place
|
|
Ergonomic D-Handle –
For improved grip and handling
|
|
|
Motor: |
120 V AC, 15 Amps |
|
No Load Speed: |
5,000 r/min. (RPM) |
|
Blade Arbor: |
5/8 in. |
|
Blade Diameter: |
10 in. |
|
Weight: |
31 lbs. |
Cutting Capacities
|
Baseboard Against Fence: |
3 1/2 in. |
|
Crown Molding Laying Flat: |
4 3/4 in. |
|
Baseboard Laying Flat: |
5 1/2 in. |
|
90° Cross Cut (nominal): |
2 in. x 6 in. or 4 in. x 4 in |
|
45° Miter Cut (nominal): |
2 in. x 4 in. |
|
R4110 Miter Saw with Exactline™ adjustable laser guide, carbide tipped blade, dust bag, work clamp, blade wrench, Operator's Manual |
|
|
|
|
|
Products
Support
Forum
Where to Buy
About Us
