Find RIDGID on:
Share this page:
|
|
Home > Products >
Power Tools
> Bench and Stationary
> Miter Saws
> 12” Compound Miter Saw with Adjustable Laser
|
|
|
12” Compound Miter Saw with Adjustable Laser
R4120
|
|
|
 |
15 Amp Motor – heavy duty motor powers through the most difficult cuts |
|
Sof-Touch™ Controls – improve comfort and grip |
|
Exactline™ Adjustable Laser Alignment System – user-adjustable laser assists operator to accurately align blade with the cut line |
|
Zero Clearance Throat Plate – gives material maximum cut-through support |
|
Work Clamp with Quick-Release Lever – securely holds material in place |
|
Quick- Release Miter Lock – provides user with easy access to make quick angle adjustments |
|
Miter Detent Thumbwheel – quick action thumbwheel releases or bypasses miter detent index points with one simple motion |
|
Extended Bevel and Miter Ranges - -3° to 48° bevel and 0° to 50° miter capacities with crown molding stops to accommodate a wide variety of cuts |
|
Repeat-A-Cut™ Marking Surface – allows user to mark fence for repetitive cuts |
|
Left Side Table Extension- for increased material support |
|
2 ½ in. Dust Port – provides connection to standard dust collection systems to help keep work area clean |
|
|
Motor: |
120 V AC, 15 Amp |
|
No Load Speed: |
4,000 r/min. (RPM) |
|
Blade Arbor: |
1 in. |
|
Blade Diameter: |
12 in. |
|
Baseboard Against Fence: |
6 in. |
|
Crown Molding Laying Flat: |
6 in. |
|
Baseboard Laying Flat: |
7-7/8 in. |
|
90° Cross Cut (nominal): |
2 in. x 8 in. or 4 in. x 4 in. |
|
45° Miter Cut (nominal): |
2 in. x 6 in. |
|
45° Bevel Cut (nominal): |
2 in. x 8 in. |
|
R4120 Miter Saw, Exactline™ adjustable laser guide, table extension, carbide-tipped blade, dust bag, dust guide, work clamp, blade wrench, hex key, operator’s manual |
|
|
|
|
|
Products
Support
Forum
Where to Buy
About Us
