Select a Country
  • {{country.Text}}
Select a Language

Features

  • 30% smaller tool increases maneuverability.*
  • 17% lighter tool reduces operator fatigue.*
  • 31% longer service interval (up to 42,000 cycles) maximizes uptime.*
  • More than 400 presses per charge using Advanced Lithium 4 Battery.
  • Ultimate flexibility with the ability to switch between battery and AC power on the same tool.
  • LED-light for continued operations in no or low-light environments.

*Versus RP 330-B.

**AC battery adaptor is not available in Australia.

Specifications

Capacity ½" to 4" for Copper and Stainless Steel, ½" to 2" for PEX.
Head Rotation 180˚ barrel/jaw swivel.
Hydraulic Ram Output 7,200 lbs. (32kN).
Weight 8.3 lbs./3.76 kg with Advanced Lithium 2 battery, 9.5 lbs./4.3 kg with AC power adapter.
Operating Temperature Range 15˚F to 122˚F (-10˚C to 50˚C).
Approximate Cycle Time 4-5 seconds.
Longest Service Interval in the Industry 42,000 cycles.
Compatibility Uses RIDGID Standard Series pressing jaws and attachments. For use with copper and stainless steel tubing, steel pipe, PEX and cutting soil pipe.
Battery Tool Kit Includes RP 340 Press Tool, two 18V Advanced Lithium 2 batteries, Advanced Lithium battery charger and carrying case.
Corded Tool Kit Includes RP 340 Press Tool, AC power adapter and carrying case.

Ordering Information

{{model}}
Catalog Number Description Weight
lb. kg
43348 RP 340 Battery Press Tool Kit (No Jaws)  19.0  8.6 
  • 43378 - RP 340 Press Tool Carrying Case
43353 RP 340 Battery Press Tool Kit w/ProPress Jaws (1/2"-1")  31.0  14.1 
  • 76652 - 1/2" Jaw for ProPress
  • 76657 - 3/4" Jaw for ProPress
  • 76662 - 1" Jaw for ProPress
  • 43378 - RP 340 Press Tool Carrying Case
43358 RP 340 Battery Press Tool Kit w/ProPress Jaws (1/2"-2")  51.0  23.1 
  • 76652 - 1/2" Jaw for ProPress
  • 76657 - 3/4" Jaw for ProPress
  • 76662 - 1" Jaw for ProPress
  • 76667 - 1 1/4" Jaw for ProPress
  • 76672 - 1 1/2" Jaw for ProPress
  • 76677 - 2" Jaw for ProPress
  • 43378 - RP 340 Press Tool Carrying Case
43363 RP 340 Corded Press Tool Kit (No Jaws)  16.0  7.2 
  • 44468 - 120V AC Power Adapter
  • 43378 - RP 340 Press Tool Carrying Case
43368 RP 340 Corded Press Tool Kit w/ProPress Jaws (1/2"-1")  28.0  12.7 
  • 76652 - 1/2" Jaw for ProPress
  • 76657 - 3/4" Jaw for ProPress
  • 76662 - 1" Jaw for ProPress
  • 44468 - 120V AC Power Adapter
  • 43378 - RP 340 Press Tool Carrying Case
43373 RP 340 Corded Press Tool Kit w/ProPress Jaws (1/2"-2")  48.0  21.8 
  • 76652 - 1/2" Jaw for ProPress
  • 76657 - 3/4" Jaw for ProPress
  • 76662 - 1" Jaw for ProPress
  • 76667 - 1 1/4" Jaw for ProPress
  • 76672 - 1 1/2" Jaw for ProPress
  • 76677 - 2" Jaw for ProPress
  • 44468 - 120V AC Power Adapter
  • 43378 - RP 340 Press Tool Carrying Case
43283 RP 340-C + Case + 220V Mains Adapter  18.1  8.2 
43288 RP 340-C + Case + 220V Mains Adapter + V 15 - 18 - 22 mm Jaws  30.2  13.7 
43293 RP 340-C + Case + 220V Mains Adapter + V 15 - 22 - 28 mm Jaws  30.2  13.7 
43298 RP 340-C + Case + 220V Mains Adapter + V 18 - 22 - 28 mm Jaws  30.2  13.7 
44483 RP 340 Press Tool Only  7.3  3.3 
43378 RP 340 Press Tool Carrying Case  8.0  3.6 
Accessories
{{model}}
Catalog Number Description Weight
lb. kg
43378 RP 340 Press Tool Carrying Case  8.0  3.6 
44468 120V AC Power Adapter  1.0  0.4 
RP 340 Press Tool is rated 4.9 out of 5 by 40.
  • y_2016, m_12, d_2, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_en, sid_841, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getAggregateRating, 100ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Perfect tool As facilities crew in an old building that used to be a hospital our Pro Press tool let's us repair with pipes that just couldn't be soldered. Although the Press tool has some bulk it is adjustable in some many ways we can get to an joint. It is so easy now to repair pipes and fittings when old valve pass. And no hot permit, fire alarm shutdowns, smoke or solder makes our lives better.
Date published: 2016-11-29
Rated 5 out of 5 by from Speed and reliability I have used propress tool when it was on a cord i think it was the first one to come out! That was when i was an apprentice in 2003! I would work with copper all day and go home as clean as i showed up to work! Now that I have my own company i need speed on my side since I am a one man one van operation and the propress tool and fitting are the way to go! Ridgid plumbing tools last longer then most men!
Date published: 2016-11-23
Rated 5 out of 5 by from The RP340 Press Tool is awsome. The RP340 saves a lot of time in repairs and new assemblies. We had a bad leak in a potable water line that could have shut down one of our production lines if we had to cut and solder the line back together. We were able to perform the completion of the leak in less than 20 minuets even though the valve we shut off wasn't holding and passing a little potable water and we kept the production line running. Great tool!
Date published: 2016-04-25
Rated 5 out of 5 by from High quality easy to use high quality tool, very easy to use, one cycle and your done, nothing compares to ridgid propress!
Date published: 2016-03-12
Rated 5 out of 5 by from light weight and easy to use, this product is the best purchase I have made, better than using solder joints. Great piece of equipment. Eliminates the use of a torch for solder joints. Cut work time in half, light weight and easier to use than any other tool I have.
Date published: 2016-02-25
Rated 5 out of 5 by from TIME SAVING TOOL TOOL PAID FOR ITSELF FIRST BUILD OUT. SAVED FIVE DAYS OF SOLDERING.
Date published: 2016-02-07
Rated 5 out of 5 by from This tool is a life & timesaver I have been a plumber since 1987 and have had my share of difficult jobs. Such as, soldering pipes that continue to leak, or other factors that can make a job difficult. The RIDGID PRESS TOOL is a timesaver and has never let me down.
Date published: 2015-12-16
Rated 5 out of 5 by from Fantastic Have been using rental tool from plumbing supply,ordered the RP 340 press tool.This tool is light weight,easy to handle when working over your head,the built in light gives extra when you are in dark area`s,,swival head and the design of the tool it self really cuts down on the time of the job.The Rigid tool is very well designed.Walter from New Haven,CT.
Date published: 2015-12-10
  • y_2016, m_12, d_2, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_en, sid_841, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getReviews, 5ms
  • REVIEWS, PRODUCT
1 Question | 1 Answer

Product Q&A

 
 
Back >>
 
 
10 months ago
Customer avatar
by
Charlotte, NC, USA
Read all my Q&A
 
Please wait while more information about JacobC is loaded.
Additional information about JacobC could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hello!

Thank you for your question.

We do not have jaws at this time specifically designed for HVAC fittings.
7 months ago
Customer avatar
by
RIDGIDtools
Read all my Q&A
 
Please wait while more information about RIDGIDtools is loaded.
Additional information about RIDGIDtools could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-12-03 T06:26:30.038-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_841, prod, sort_default
1 of 1
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getContent, 30ms
  • QUESTIONS, PRODUCT