The RIDGID® ST-33Q+ Line Transmitter with Bluetooth is the ideal transmitter for inducing current onto a target line. It will also direct connect using any frequency from 10Hz to 490kHz* with power up to 10 Watts. The ST-33Q+ also allows the flexibility of using D-Cell alkaline batteries or 18V rechargeable RIDGID batteries for minimal interruptions on the job. The new Bluetooth feature on the ST-33Q+ allows you to finish complex locates faster by wirelessly changing the transmitted frequency from the SR-24 receiver from up to 200 yards away.
- Distance - Induce over 8 times more current than traditional transmitters. More current means you can walk and trace further than ever before.
- Versatility - Power options include Lithium-Ion 18 V rechargeable battery, six D-cell batteries, or an external 10-28 VDC power source.
- Accuracy - Induce more current at lower frequencies. Lower frequencies are less prone to jump onto other lines in congested areas reducing distortion and increasing accuracy.
- Speed - Use with a SR-24 Bluetooth-enabled locator, to control the ST-33Q+ settings wirelessly from the SR-24 receiver. Change transmitted frequency remotely from up to 200 yards away.
|Direct Connect (pre-programmed)||128 Hz, 1 kHz, 8 kHz, 33 kHz, 93 kHz, 262 kHz.*|
|Direct Connect (user programmed)||Any Frequency from 10 Hz – 490 kHz*|
|Induction||8 kHz or 33 kHz.|
|* Up to 93 kHz for devices sold in Europe and Australia and New Zealand.|
|Max Power||10 watts.|
|Bluetooth Max Wireless Range||200 yards (183 m).|
|Batteries sold separately.|
|49338||ST-33Q+ Line Transmitter with Bluetooth||11.1||5.0|
|20973||SeekTech 4” (100 mm) Inductive Signal Clamp||2||0.90|