- 30% smaller tool increases maneuverability.*
- 17% lighter tool reduces operator fatigue.*
- 31% longer service interval (up to 42,000 cycles) maximizes uptime.*
- More than 400 presses per charge using Advanced Lithium 4 Battery.
- Ultimate flexibility with the ability to switch between battery and AC power on the same tool.
- LED-light for continued operations in no or low-light environments.
*Versus RP 330-B.
**AC battery adaptor is not available in Australia.
|Capacity||½" to 4" for Copper and Stainless Steel, ½" to 2" for PEX.|
|Head Rotation||180˚ barrel/jaw swivel.|
|Hydraulic Ram Output||7,200 lbs. (32kN).|
|Weight||8.3 lbs./3.76 kg with Advanced Lithium 2 battery, 9.5 lbs./4.3 kg with AC power adapter.|
|Operating Temperature Range||15˚F to 122˚F (-10˚C to 50˚C).|
|Approximate Cycle Time||4-5 seconds.|
|Longest Service Interval in the Industry||42,000 cycles.|
|Compatibility||Uses RIDGID Standard Series pressing jaws and attachments. For use with copper and stainless steel tubing, steel pipe, PEX and cutting soil pipe.|
|Battery Tool Kit Includes||RP 340 Press Tool, two 18V Advanced Lithium 2 batteries, Advanced Lithium battery charger and carrying case.|
|Corded Tool Kit Includes||RP 340 Press Tool, AC power adapter and carrying case.|
|50238||RP340 press Kit: RP340 tool, 15, 20, 25, 32, 40 & 50mm jaws, 2ah battery, charger & case||-||-|
|50243||15mm Jaw, 32 kN (suits RP340)||-||-|
|50248||20mm Jaw, 32 kN (suits RP340)||-||-|
|50253||25mm Jaw, 32 kN (suits RP340)||-||-|
|50258||32mm Jaw, 32 kN (suits RP340)||-||-|
|50263||40mm Jaw, 32 kN (suits RP340)||-||-|
|50268||50mm Jaw, 32 kN (suits RP340)||-||-|
|44483||RP 340 Press Tool Only||7.3||3.3|
|43378||RP 340 Press Tool Carrying Case||8.0||3.6|
|43378||RP 340 Press Tool Carrying Case||8.0||3.6|
|43323||18 V 2.0 Ah Li-Ion Battery Pack||-||0.5|
|43328||18 V 4.0 Ah Li-Ion Battery Pack||1.5||0.8|
|33193||Charger for 18V Advanced Lithium 2 Battery||3.0||1.4|
RP 340 Press Tool is rated out of 5 by 5261.
Rated 5 out of 5 by craze748 from The RP340 Press Tool is awsome. The RP340 saves a lot of time in repairs and new assemblies. We had a bad leak in a potable water line that could have shut down one of our production lines if we had to cut and solder the line back together. We were able to perform the completion of the leak in less than 20 minuets even though the valve we shut off wasn't holding and passing a little potable water and we kept the production line running. Great tool!
Date published: 2016-04-25
Rated 5 out of 5 by pipelayer from High quality easy to use high quality tool, very easy to use, one cycle and your done, nothing compares to ridgid propress!
Date published: 2016-03-12
Rated 5 out of 5 by utilities from light weight and easy to use, this product is the best purchase I have made, better than using solder joints. Great piece of equipment. Eliminates the use of a torch for solder joints. Cut work time in half, light weight and easier to use than any other tool I have.
Date published: 2016-02-25
Rated 5 out of 5 by PIPIPER from TIME SAVING TOOL TOOL PAID FOR ITSELF FIRST BUILD OUT. SAVED FIVE DAYS OF SOLDERING.
Date published: 2016-02-07
Rated 5 out of 5 by palledayjensen from This tool is a life & timesaver I have been a plumber since 1987 and have had my share of difficult jobs. Such as, soldering pipes that continue to leak, or other factors that can make a job difficult. The RIDGID PRESS TOOL is a timesaver and has never let me down.
Date published: 2015-12-16
Rated 5 out of 5 by Walter from Fantastic Have been using rental tool from plumbing supply,ordered the RP 340 press tool.This tool is light weight,easy to handle when working over your head,the built in light gives extra when you are in dark area`s,,swival head and the design of the tool it self really cuts down on the time of the job.The Rigid tool is very well designed.Walter from New Haven,CT.
Date published: 2015-12-10
Rated 5 out of 5 by HVAC1 from awsome toll with great versatility The RP340 is the best out there compared to other press tools, in its versatility with other tool dies and soil pipe cutter. However for the small contractor to have the tool in the truck to use occasionally it is extremely expensive at $3000 plus
Date published: 2015-11-28
Rated 5 out of 5 by GodofAppliances from This product is portable We love this product. Do not need a flame permit to make repairs.
Date published: 2015-10-15
1 Question | 1 Answer
10 months ago
Charlotte, NC, USA
Additional information about JacobC could not be loaded.
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0https://ridgid.ugc.bazaarvoice.com/answers/submit/2618-en/product/841/question/543751/undohelpfulness.djs?authsourcetype=__AUTHTYPE__&format=embeddedhtml&innerreturn=https%3A%2F%2Fridgid.ugc.bazaarvoice.com%2Fanswers%2F2618-en%2Fproduct%2F841%2Fquestions.djs%3Fexpandquestion%3D543751%26format%3Dembeddedhtml%26scrolltotop%3Dtrue&return=__RETURN__&sessionparams=__BVSESSIONPARAMS__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__&user=__USERID__
Thank you for your question.
We do not have jaws at this time specifically designed for HVAC fittings.
7 months ago
Additional information about RIDGIDtools could not be loaded.
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0https://ridgid.ugc.bazaarvoice.com/answers/submit/2618-en/product/841/answer/661957/undohelpfulness.djs?authsourcetype=__AUTHTYPE__&format=embeddedhtml&innerreturn=https%3A%2F%2Fridgid.ugc.bazaarvoice.com%2Fanswers%2F2618-en%2Fproduct%2F841%2Fquestions.djs%3Fexpandanswer%3D661957%26expandquestion%3D543751%26format%3Dembeddedhtml%26scrolltotop%3Dtrue&return=__RETURN__&sessionparams=__BVSESSIONPARAMS__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__&user=__USERID__
1 of 1
1 of 1