10 in. Dual Bevel Miter Saw | RIDGID Professional Tools

Features

15 Amp Motor - Heavy duty motor powers through the most difficult cuts
Adjustable Laser Guide - Internally powered laser assists operator to accurately align blade with the cut line
Bevel Crown Molding Stops - Positive stops at most common angles 0, 33.9, 45, and 48º left and right
Extended Miter Ranges - 0° to 50° miter capacities with positive stops to accommodate a wide variety of cuts
Miter Crown Molding Stops - Positive stops at most common crown molding angles 0º, 15º, 22.5º, 31.6º, and 45º left and right
Dual Bevel - 0° to 48° Left and Right with crown molding stops so that you can move the saw head instead of the material
Sliding Miter Fences - Provides support for wider material; adjusts for bevel cuts
Quick-Release Miter Lock - Provides user with easy access to make quick angle adjustments
Dust Port - Provides connection to standard dust collection systems to help keep work area clean
Ergonomic D-Handle - With innovative hex grip for a secure grip and maximum control
Zero Clearance Throat Plate - Gives material maximum cut-through support
Work Clamp - Securely holds material in place

Specifications

Motor	120 V AC, 15 Amps
No Load Speed	5,000 r/min. (RPM)
Blade Arbor	5/8 in.
Blade Diameter	10 in.
Cutting Capacities	Baseboard Against Fence: 3 5/8 in.
	Crown Molding Laying Flat: 4 5/8 in.
	Crown Molding Nested (45/45): 4 5/8 in.
	Crown Molding Nested (52/38): 4 5/8 in.
	Baseboard Laying Flat: 5 1/2 in.
	90° Cross Cut (nominal): 2 in. x 6 in. or 4 in. x 4 in.
	45° Miter Cut (nominal): 2 in. x 4 in.
Weight	32 lbs.
Including	R4112 Miter Saw with Adjustable Laser Guide, Carbide Tipped Blade, Dust Bag, Work Clamp, Blade Wrench, Hex Key, Operator’s Manual.

Support Documents

Operator's Manual

10 in. Dual Bevel Miter Saw Manual (12.54 MB)

Warranty

3-Year Limited Warranty and LSA

Reviews
Q&A

10 in. Dual Bevel Miter Saw is rated 4.8 out of 5 by 5.

Rated 5 out of 5 by nashers from great saw, precise, efficient Great saw, awesome warranty, easy to use and good price

Date published: 2014-12-22

Rated 5 out of 5 by jdecastro from Good Price Good Saw Have been using the Ridgid compound miter saw for ten years now. The angle accuracy is still right on the mark. Had to replace the laser guide once and had the blade sharpened a couple of times but I use the heck out of it. Have built two houses for my personal use using this saw for cabinet construction, T&G ceiling plank panels, door headers, window headers, etc.. Would not hesitate to buy another one if the need arises and would recommend this saw to any serious DIYer or professional contractor.

Date published: 2014-11-25

Rated 4 out of 5 by buckhit417 from Quick and Easy I used this saw to cut our hardwood floors. It was easy to use and helped get the job done quickly. Very clean cut

Date published: 2014-11-24

Rated 5 out of 5 by painterpa from Solid and Accurate I have enjoyed using my miter saw, it is built solid with a cast frame and I find it to be very accurate. Also like the warranty that comes with it.

Date published: 2014-11-24

Rated 5 out of 5 by ogurchak01 from excellent saw - very mobile I perform a lot of finish carpentry work and need a mobile miter saw for cutting casings, base and crown moldings. This saw is light weight and easy to cart around, is very precise and delivers excellent, clean cuts on hardwoods, pine, & MDF. On top of delivering excellent results, this miter saw was very in-expensive. It is a rugged work-horse.

Date published: 2014-11-24

How do you attach a ridgid shop vac to this

the end that plugs into the vac is the only piece that seems to fit, but then you are left with nothing to plug into the vac. Seems like you would have made the port the same size as the end of the hoses

Asked by: Scooter0987

Thank you for contacting RIDGID! To further assist you, please call our Customer Service at 1-800-474-3443 with the model number of the vac. Our business hours is from Mondays-Fridays 8:00AM – 5:00PM Central Standard Time. Looking forward to hearing from you. Regards, RIDGID

Answered by: RIDGIDtools

Date published: 2017-02-19

Does the 4112 have a depth stop, e.g. for a dado?

Asked by: DarkSky

Thank you for contact RIDGID customer support. The miter saw does not accept dado blades.

Answered by: RIDGID14

Date published: 2016-05-06

Can this saw be used as a chop saw for metal?

Asked by: Patinasoul

Thank you for your interest in RIDGID. No, we cannot recommend the R4112 for use with cutting metal. It is not a metal cut off type saw. It is designed for the application of cutting wood and plastic materials. Regards, RIDGID

Answered by: RIDGIDtools

Date published: 2015-09-01

Does the R4112 Mitre Saw have much of a kick when it starts up?

Asked by: 01keef