- Retract-A-Rip™ System - Tool free extendable table allows for up to 25 in. rip capacity and material support through the cut
- Innovative Internal Rip Fence Storage - Maintains fence alignment by protecting fence while stored
- 15 Amp Motor - Heavy duty motor powers through the most difficult cuts
- Micro Bevel Adjustment - provides superior accuracy for precise bevels
- Ind-I-Cut Alignment Disk - Writeable surface to accurately align cut line with blade kerf
- Complete On-Board Storage Solution - For miter gauge, push stick, blade guarding, extra blades, wrenches, power cord and rip fence
- 2 1⁄2 in. Dust Port - Provides connection to standard dust collection systems to help keep work area clean
- Oversized On/Off Switch Assembly - For easy actuation
- Advanced Tool Free Guarding - Modular design for versatility and exceptional blade coverage
- Accessory Storage - For tape measure, pencil or other marking tools
- Combination Height/Bevel Adjustment - Single handwheel design for ease of use. Includes height adjustment lock to ensure an exact depth of cut
|Motor||120 V AC, 15 Amps|
|No Load Speed||5,000 r/min. (RPM)|
|Blade Diameter||10 in.|
|Cutting Capacities||Depth of Cut at 90°: 3 1/2 in. Depth of Cut at 45°: 2 1/2 in.|
|Dado||3/4 in. (Dado throat plate not included)|
|Rip Capacities||25 in. right of blade 12 in. left of blade|
|Includes||R4513 Table Saw with TSUV stand, carbide tipped blade, anti-kickback pawls, blade guard assembly, rip fence, miter gauge, push stick, blade wrenches, (2) Hex Keys and Operator’s Manual.|
Heavy Duty 10 in. Portable Table Saw With Stand is rated out of 5 by 29.
Rated 1 out of 5 by ShawnS from Great warranty, You will need it I've owned this saw a little more than a year. Im taking it back to the repair facility soon for a third motor. The second motor lasted about 2 months before the bearings became noisy. The first motor has a similiar life. This saw is not of a quality you can count on. I also own a Rigid planer that has proven unreliable. The warranty does cover repair but how many people have a second table saw to use for three weeks during the repair, which for me is a few times a year. Skip this saw and buy something you can rely on.
Date published: 2017-08-23
Rated 3 out of 5 by adsflkjfsadkjf17 from Disapointing: Good saw but not durable I am a design builder who uses and owns many tools. I purchased this saw in 2010 and recently the top ripped loose from the body. The plastic body is attached to the top with four fasteners. The four plastic tabs broke when this saw was loaded in my truck with many other things. It was a good portable saw with some innovative features and it worked well. I tried to order a replacement body from Rigid but it was obsolete so I ordered a body for the current model in the hopes that I could make it fit. No luck. I tried gluing the pieced back together with glue made for plastic...no luck. I melted the plastic back together and this worked for several days but eventually broke. Rigid needs to redesign this connection and replace it with something more durable such as the design that Bosch uses. I'm a professional that is willing to pay for a good tool, but poorly built "throw-away" tools are a hassle and lead to interruption of work. It seems like all brands of saws have some kind of flaw. It makes me wonder if they field test their products or use the feed back from carpenters.
Date published: 2017-08-21
Rated 3 out of 5 by Chuck4648 from O.k. for a beginner or hobbyist I've had this saw for 2 years now, so feel comfortable making an assessment. I am not a professional carpenter, but have become a fairly accomplished "weekend woodworker" over the past 3-4 years. I bought this saw as a first table saw after getting tired of using a circular saw and a guide. I was initially very happy with the saw, and still use it regularly. It has several strengths, including very easy portability for a small shop like mine, as well as a pretty good fence for an entry level saw, and decent dust collection using a shop vac. As I've used the saw, however, I begin to notice some small things that have become increasingly frustrating. For example, the miter slot on the left hand side of my saw is not uniformly sized, so when I adjust my Incra miter gauge (the gauge that comes with the saw is o.k. but I wanted more precision) at the middle of the slot it binds and sticks at the ends. The same is true when I use a crosscut sled. Additionally, I was cutting some floating panel doors for a cabinet and discovered that each slot was coming out slightly uneven. I checked the flatness of the table and found that there is a slight dip near where the throat plateinserts into the table. The saw bogs down a bit when ripping anything thicker than 3/4 inch, but that is not a real problem, I just slow down the feed rate. Probably my biggest irritation lies with the throat plate itself, and Ridgid's decision to go with an odd shape and depth for it. The plate is a very thin piece of metal, which is adjusted by using screws. That is fine when ripping or crosscutting, but when it comes time to use a dado blade, things change dramatically. The only dado plate available from Ridgid accommodates a full 3/4 inch dado stack, but is not effective when using smaller sizes. The obvious answer is to make a zero-clearance insert...but the odd shape and depth of the plate makes it very difficult to do so. Plywood is too thick, as are phenolic plates available from places like Lee Valley. I guess I don't understand why Ridgid chose to make it so difficult to accommodate a tool woodworker use regularly when using a dado stack. Overall, I'm not unhappy with the Ridgid brand (I just bought a sliding compound miter saw and am thrilled with it) but this tool needs work.
Date published: 2017-08-08
Rated 5 out of 5 by JonnyB from Easy to use. Easy to store. Flawlessly performed on a flooring and closet job I did at home and is still compact enough for a DIY'er to not lose a space in the garage. It's almost the same size as my rolling carry on suitcase and easily fit against the wall and out of the way in my shop.
Date published: 2017-07-24
Rated 1 out of 5 by Shaft from R 4511 granite critical parts discontinued 7 year old saw junked, cannot get part, discotued in 2012 after 2 years, part failed after 7 years. Moderately used, totally cared for. No part availiable Need a bouy anchor?
Date published: 2017-04-06
Rated 2 out of 5 by Blueball from Reduced durability VS previous models I have had to use bandaids and kind words to keep this saw running as long as it has. I have owned several Ridgid table saws over the last 15 years.This one broke far faster than any previous model. The durability of this model is sub-par. A crack formed in the table top within 8 months. Now the motor bearings are completely shot. The design is good. Easy to move, easy to use. Seems to have a bit more power than previous models. Don't buy it if you plan to use it professionally.
Date published: 2017-01-11
Rated 4 out of 5 by Anonymous from Pretty good saw I like this saw for less than heavy duty cutting. My only complaint is with the throat plate. It is not level with the table and does not provide support when cutting narrow pieces. This allows the piece to 'fall' towards the blade and ruin the piece. I will be replacing the throat plate with a home made one. Other than that, I love this saw. The arbor nut becomes very tight and the wrenches provided are not long enough or strong enough to handle it.
Date published: 2016-11-24
Rated 4 out of 5 by texasjim from I would reccomend this saw. If you buy this saw the first thing you need to do is go to a fastener store and buy a 5/8-18 grade 8 hex nut to replace the nut on the saw arbor. The original nut is soft and extremely difficult, and almost impossible, to remove after you have used the saw for any time at all. Other than that the saw works good. I found that the cross cut guide to not quite straight so if you make a cross cut sled use only one slot. Also the slots are not quite the same width so I filed them open where needed using a caliper to check the opening. The cross cut guide is cheap, but can be made to work just fine for the average person. The blade is quite a bit smaller than the slot so I went on McMaster Carr's website and ordered shim stock with adhesive backing and added it to the blade. The rip fence works just fine. I added a removable extra plywood piece using the slots provided to use as a fixture base. I have never had a fine adjustment guide and in fact really do not need one. All the talk about one being missing on this saw is bull c-ap. This saw is quite comparable to all the other contractor saws and I think better than most. My favorite feature is the fold up base that allows me to take my saw out of my 8x12 foot man cave and work on the patio.
Date published: 2016-11-13
1. let me know where I can get a copy of the instruction manual. 2. What is the difference between the r4513 and the older model r4510?
To respond to your question about the differences, my answer would be almost everything. Fortunately, the saw remains very easy to use and extremely accurate for a portable saw. My generalized answer is really based on the components of the saw. Ridgid changed almost all of them. As a user, the primary differences would be: the throat plate is now square instead of rounded, the miter gauge is much lighter and doesn't seem as substantial, the rip fence no longer has a micro adjustment (never used it anyway), but the primary thing in my opinion is the motor. Then new motor spins at a no load speed which is 600 rpm faster than the R4510. Maybe its just my imagination, but this seems to produce a smoother cut. Hope this helps.
Date published: 2017-09-06
is the the motor burn out protected?
Made the mistake of ripping a 2x6 w/ fine tooth blade. and it won't run now. did I burn out the motor?
The switch has circuitry that will protect the motor. If it gets hot, it will melt inside the switch. My saw is put off warranty so I bypassed the burned out circuitry with a new switch, works great. Be sure to use the proper sharp blades and don't abuse the saw.
Date published: 2017-09-06
Is there an option to buy the saw without the stand?
I don't need the stand. Is there an option to purchase it at a lower price without the stand? Thanks!
No, the stand is part of the kit
Date published: 2017-09-06
What material is the Table Top made of?
I don't believe this to be cast iron, but it feels too dense to be aluminum. Inquiring minds want to know. Thanks
Thank you for your interest in RIDGID. The RIDGID R4513 table saws table top is powder coated cast aluminum. Regards, RIDGID
Date published: 2017-09-06
Actual cut depth on the 90?
In one section of this ad, it states this saw can rip through 4" X 4" material in a single pass for fast and accurate cuts. Then in the specifications area, it states the cut depth is 3.5" on the 90°. Please give the specific/accurate cut depth that this saw is capable of. Thank you Store and Ad http://www.homedepot.com/p/RIDGID-15-amp-10-in-Heavy-Duty-Portable-Table-Saw-with-Stand-R4513/100090444
Thank you for your interest in RIDGID. The R4513’s cutting depth at 90 degrees is 3.5 in. Regards, RIDGID
Date published: 2017-09-06