- Pull trigger and turn handle, or add any variable speed (left / right) chuck drill machine for extra power.
- Cable self-feeds down drain.
- No mess. Hands don’t touch cable.
- Equipped with 1/4" x 25' (6.3 mm x 7.6 m) MAXCORE® cable with bulb auger.
|Catalog Number||Model No.||Description||Diameter||Length||Weight|
|41408||Power Spin||Hand Spinner with Bulb Auger||1/4||6||25||8||5||2.2|
|42163||Cable||MAXCORE Replacement Cable||1/4||6||25||8||3||1.4|
Power Spin with AUTOFEED® is rated out of 5 by 29.
Rated 5 out of 5 by LEWALL from GREAT TOOL I bought this to replace an older off brand one I have. I've used this for other folks I know instead of myself. It's easy to use and the auto feed is worth the couple of extra bucks. It works great on a cordless drill. I recommend this as a good hand drain cleaner.
Date published: 2017-01-08
Rated 5 out of 5 by Noneused from This product is easy to use. The drain cleaner worked as well as I expected it would.
Date published: 2016-12-29
Rated 5 out of 5 by RbRed from I used the power spin with my Ridgid 18 volt drill, I cleaned 3 drains in less than an hour. Easy and fast. Tub drain took 15 minutes, it was full of hair. Bathroom sink took 15 minutes. Kitchen sink took 30 minutes, only because I had to take the drain pipes apart. It was full of grease. This was the 2nd one I have owned and when it wears out, I will get another one.
Date published: 2016-12-27
Rated 5 out of 5 by Albano2016 from My power spin cleaned all our drain that is clogged its easy to use, manually or driven with a battery powered drill. This power spin works great, it has auto feed feature. This product cleaned all of our drain that had a clogged on the drain. Use it as it says on the manual and it wont give you a problem. The only thing wears off or breaks after using it for a lot of times is the screws on the end cable after that the other screws, it happens coz its plastic, their reliable and it have a full life time warranty.
Date published: 2016-12-22
Rated 4 out of 5 by bigjulio007 from The product has great features I used the snake with my electric drill and it seemed to clean out a mess in the pipes. The jury is out for how well it holds up over a couple of years,but it was easy to use with good results. I would recommend it to anyone as a first option over a plumber with little investment.
Date published: 2016-12-11
Rated 5 out of 5 by Luariston from Great Snake This was a great investment. When the drains get clogged and you don't want to spend hundreds of dollars calling a plumber this tool is key. It will help get your drains flowing with very little effort. I bought this because of the Ridgid brand quality and lifetime warranty. You can feel the quality and craftsmanship when you hold this snake. It might not be something I use often, but so far it has gotten the job done in my new home.
Date published: 2016-12-04
Rated 1 out of 5 by jmac52766 from I do not recommned this product. Product is easy to use, but has poor performance, has no durability, broke on first use.
Date published: 2016-08-12
Rated 1 out of 5 by tbeegs from this product broke after the first time using it. I purchased this and the first time I used it broke,
Date published: 2016-08-07
How do you clean this?
Just bought this and was going through the manual and it says to clean the auger after use. Ridgid also sells a rust inhibiter, but how do you get the thing apart. There is no information anywhere in the book.
there are 4 screws in the back of the drum . remove the screws and the drum comes apart or you can pull the cable totally out of the front of the tool for cleaning the cable and rust proofing which needs to be done after each use anyway. wd 40 or a light weight motor oil can be used to rust proof the cable because a lot of times a liquid drain cleaner has been used and it is very corrosive and will eat up the cable causing it to break off in the pipe and cause more labor time and cost.
Date published: 2015-10-07
How to assemble the handle ?
I have a rigid power spin tool. It seems that I may have lost some parts for the handle, where either a drill can be connected or turning the handle. HOw do I get the parts?