Select a Country
  • {{country.Text}}
Select a Language


Hammer Drill

  • GEN5X™ Motor Technology - Produces 780 in-lbs of torque for demanding drilling and driving applications
  • Chuck Light - Unobstructed light shines directly out of the chuck to eliminate shadows around the bit
  • Micro Clutch - Premium clutch design allows pin-point accuracy with over 100 torque settings
  • Mode Selector - Quickly transition between hammer, driving and drilling without changing the micro-clutch setting

Impact Driver

  • Gen5X Motor Technology - Drives various fasteners easily with an open frame motor that provides 2,000 in-lbs of high torque output
  • 3 Speed Settings - Provide adjustable power and speed for the most demanding job as well as precision work
  • Tri-beam LED - Three LED lights around the front housing to eliminate shadows around the bit
  • One Handed Quick-Load Bit Holder - Makes bit changes quicker and easier with a snap load collet and simple ejecting bit release which accepts bits as small as 1in. (1 in. bit not included)

Circular Saw

  • Gen5X Motor Technology - Powers through the cut every time with a best-in-class open frame motor for corded like performance
  • 7-¼ in. Blade Size - For maximum cutting depth
  • Heat Treated Aluminum Base - For durability on the jobsite
  • 0-56° Bevel Detent System - Positive stops at common angles for quick adjustments

Reciprocating Saw

  • Gen5X Motor Technology - Delivers optimal cutting speed with 1-1/8" stroke length at 3,000 strokes per minute
  • On/Off Orbital Action - Orbital cutting for wood demolition and non-orbital for metal cutting
  • Open Shoe Design - Provides increased visibility when cutting
  • Tool-Free Shoe - Easily extend recip shoe in and out for using different parts of your blade
  • Tool-Free Blade Changes - Makes changing blades quick and easy
  • Sight Line Blower - Directs debris away from cut line for increased visibility

LED Flashlight

  • Lifetime LED Bulb - No need to change the bulb for the life of the flashlight
  • Extended Run-Time - Over 40 hours with 4.0 Ah HYPER™ Lithium-Ion battery
  • Rotating Swivel Head - Directs light where needed


Hammer Drill

Torque 780 in.-lbs.
No Load Speeds 0 - 450/0-1,600 RPM 0 - 7,200 / 0 - 25,600 BPM
Chuck ½ in. carbide locking jaws

Impact Driver

Torque 2,000 in.-lbs.
No Load Speeds 0 - 2,750 RPM 0 - 3,200 IPM

Circular Saw

Blade Size 7-1/4 in.
No Load Speed 3,700 RPM

Reciprocating Saw

Stroke Length 1-1/8 in.
No Load Speed 0 - 3,000 SPM

LED Flashlight

Capacity 1.5 Ah
Voltage 18V

Hyper Lithium Batteries

Capacity 4.0 Ah
Voltage 18V
Features Up to 4X the runtime Up to 4X longer life Operates down to -4°F and up to 120° F


Compatibility 9.6V - 18V
Input 120V

Includes: RIDGID® R8611503 Hammer Drill, R86035 Impact Driver, R8652, Circular Saw, R8642 Reciprocating Saw, R8693 LED Flashlight, R840095 Charger, (2) R840087 4.0 Ah Batteries, Auxiliary Handle, (2) Bits, Circular Saw Blade, Blade Wrench, Reciprocating Saw Blade, (3) Belt Hooks, Bag, and Operator’s Manuals

Ordering Information


RIDGID® R8611503 Hammer Drill, R86035 Impact Driver, R8652 Circular Saw, R8642 Reciprocating Saw, R8693 LED Flashlight, R840095 Charger, (2) R840087 4.0 Ah Batteries, Auxiliary Handle, (2) Bits, Circular Saw Blade, Blade Wrench, Reciprocating Saw Blade, (3) Belt Hooks, Bag, and Operator’s Manuals
GEN5X™ 5 Piece Combo Kit is rated 4.8 out of 5 by 9.
  • y_2018, m_1, d_15, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en, sid_1108, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk,
  • CLOUD, getAggregateRating, 18ms
Rated 4 out of 5 by from It's the safety on the Circ Saw Love the kit, they are heavy duty enough for my multi-purpose handyman work on four properties & other call-outs. Just bought it, so durability gets a mid-mark as only time will tell. The recip is nice & tight, drill does it all but the bigger work of an SDS or SDS Max or floor chipping. The driver is good on bigger screws, but I have a 12v dedicated red-brand of non-hammer driver I prefer using for most screwing around. It's not noisy as impact drivers are.The light's great. However it's a flashlight, and I prefer the broader-range more stable design of other lights for use in a work-space. Nice as a flashlight tho. They seem well-made & tight to tolerances. Noise levels are very good. Very handy for those must do now jobs. The drill will get a lot of regular use, the driver on bigger material, the recip will do a lot of wrecking & rough trim. The circ saw is what encouraged the purchase, and is what disappoints. Accurate powerful enough, but that bloody safety lock bites my nose. I'm really here to discuss the circ saw, which is highly accurate using the plate-guides... what a surprise. It's got the juice to whack many 2x6 one after the other and I've yet to hit a battery-limit, but were I to rip a few, I'm sure it would require more than 2 batteries. The tool & battery are heavier than a yellow light-weight corded, but on par with most modern circ saws. What rips my nose is the safety-lock on the trigger. OK, it's designed for left or right hand users... good thought. But it take a real push to release, and seriously, a pro tool doesn't need a safety. The saw, like most miter saws, jumps when activated. This danged lousy safety makes that jump magnified and the blade gets off to a bad starting cut. It's not a good design. Now you have to correct and risk binding & kickback. There's many to argue the point, but a pro tool without a safety is just safer to start with. AND, to just rub in the salt, you have to carry the tool by the trigger guard, or chew up your battery because the light switch is under hand where you'd normally carry a a safety is then REQUIRED... needs a redesign in this area. Almost excellent. All in all, not lightweights. All in all good accurate tools. I bought them for the little jobs that need instant attention with little set-up time, and for that they'll do well. I wanted the full-size circ saw as I have a lot of 7 1/4 blades, they range cheapie to top-line and I don't want to add a new size to the mix. That safety switch will stop me from making the circ saw a work-day tool. For all day jobs, I choose a corded pro saw without safety. If I can get rid of that lock, I'd change my mind and my review.
Date published: 2017-10-05
Rated 5 out of 5 by from Awesome I love this set. Feels solid in hand, tons of power from the drill driver. I had my doubts about the circular saw but it zipped through a pressure treated 2x12 with ease. Only when the battery wore down did the saw lose performance. Snapped on a fresh battery and went back to work. Recipicating saw is heavy but powerful. I let my 12 yr old nefew use it and he had no problems holding on to it. The drill is one of the best I've used. But it does heat up under moderate use. But otherwise I really liked using it. Impact driver works well for driving lag bolts and losening bolts. Finally, the flash light is crazy powerful. Blinded myself temporarily with it. This is a great set if tools. And the lifetime warranty is a nice bonus.
Date published: 2017-04-22
Rated 5 out of 5 by from Great Tools Only issue is with the circ saw. The base must be forced into the 0 degree setting, otherwise it cuts at a bevel. It appears to be binding somewhere but I can't see where. The lock does seem to be holding it in place though. Also noticed not a lot of RPM from the blade but it appears to not hinder performance. And 100+ torque settings on the drill seems a bit overkill. I mean, why is there a need to set torque ABOVE the 100 percent mark? Light switches get pushed often on accident, but all in all a great set of tools.
Date published: 2016-07-29
Rated 5 out of 5 by from Heavy Duty Set I bought this cordless set while I was building steel chicken houses. I had the opportunity to go head to head with DeWalt and Milwaukee cordless tools that other contractors had. I will say I am very impressed with this set. The only complaint I have is the impact driver that comes with this set. I put a lot of self-tapping screws in and this impact driver worked ok for the first 50 or so and then it would get really hot. I ended up buying the stealth driver and that solved the heat problem. I highly recommend this set not only because it is good, but it is also backed by a lifetime warranty.
Date published: 2016-04-17
Rated 4 out of 5 by from there are some things that i would change the one complaint that i have is with the circular saw. i wish the blade was on the other side. presently i work as a mechanical designer for M3 Engineering but before that i was a carpenter for about 10 years. i started working as a carpenter in Texas where they use saws primarily set up like the rigid saw. when i went west they use Skills. i also have a dewalt set which has the saw set up like the skill. i like the Skill set up because you can saw small pieces with ease and safey. i tried that with this saw and took off part of the end of my middle finger added about 7 stitches in my third finger. something i would not have done had the saw been set up like skill with the blade on the other side. but all in all the performance and the quality of the tools are excellent. i love rigid tools but i wish they would flip their saw.
Date published: 2016-02-23
Rated 5 out of 5 by from Best cordless set I had I've had pretty much every brand of cordless tools. I used to stay away from Ridgid, because for some reason I thought they weren't heavy duty, I think I was confusing them with ryobi. Dont make the mistake. This 5x combo kit I have it just as good if not better tyem sets $300 more. Use the hammer drill and impact driver all dqy with above average use. I've been getting 2days on my 2 batteries without having to charge them. And thats them getting rotated into the circular and reciprocating saws. I barely hooked my corded saw up, because the cordless saw are about 90% as good. I'm property manager so I'm in and out of 5 jobs a day. So convenient not to have to plug in cords. I would recommend this tool to any tradesman unless you're doing heavy high framing and construction. Just recently I took up and reinstalled the boards on a 400 square ft deck to repair some leaks in the roof under it. Did the whole job with the 2 batteries on a single charge.with juice still left.
Date published: 2015-11-04
Rated 5 out of 5 by from Impact Rocks While I like the whole X5 kit, I REALLY like the impact driver. The impact driver 3 power settings are fantastic for the perfect driving of fasteners. The 3 LED's on front are excellent at lighting up work. My fav tool of the bunch. The drill is cool with the LEDs in the chuck, and the LED flashlight is super bright and has a very looong run time. Bigger saw blade is ok and the recip saw is ok. It was worth the upgrade from the X4 to the X5 just to get the new impact. Great value!
Date published: 2015-09-17
Rated 5 out of 5 by from Best tool kit for the price Drill: awesome love the chuck light, the grip is exceptional love the new recessed groove on it, also how you can now position the handle 4 ways. The power is incredible kicks the red and white team to the curb. Impact: powerful and light, the improved grip is awesome so is the light. The choice of power levels makes it 3 tools in 1. So powerful you guys need to make a stronger 1/4 hex to square adapter, or food for thought a 3/8 impact wrench tool only to add on to the kit ;). Recip saw: beautiful!! Simply put the grip I can't get enough. Powerful yet light love the new direction of the orbital switch cuts like butter through steel and wood. Circular saw: works flawlessly, feels solid cuts like a charm. Workers loved it! Light: lasts forever, high quality light output couldn't be happier. So good I brought mine into the shop one day let everyone use a little and had 2 guys buy their own kits. That should tell you something. I also am a former user of the x4
Date published: 2015-05-13
  • y_2018, m_1, d_15, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en, sid_1108, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 2ms

What exactly is Gen5X Motor Technology? Is it brushless since that seems to be the technology to have?

I am not seeing really much of anything on your website that explains what Gen5X Motor Technology actually is. Is it brushless technology? I'm just looking for some clarification so I can decide on if this is the kit for me. Thanks
Asked by: Serbus
Ya. It is just a brushless motor.
Answered by: ua1770
Date published: 2017-09-06

When will the GEN5X sawzall be offered as a bare stand-alone tool?

I've taken the jump into upgrading all my cordless power tools. I decided to invest in all your newest GEN5X brushless tools instead of the brushed GEN5X set. I'm only missing a sawzall and prefer to buy the GEN5X model over the 4X model currently offered. I'm hoping for this to be my last power tool purchase and want the newest versions I can purchase at this time. Is it possible to get the GEN5X sawzall by itself? If not, why? Or when will the GEN5X tools be offered as stand-alone tools? Thanks in advance for your response.
Asked by: Roznrph
Hello! Thanks for the question! At this time, we don’t have a date for when the GEN5X reciprocating saw will be offered as a bare tool. However, I’ll pass this message along to our product team as they’re always anxious for suggestions from our customers.
Answered by: RIDGIDtools
Date published: 2017-09-06

i bought the GEN5X 5 Piece Combo kit With Ridgid mini bare tool and trying to find model number from box that got thrown away, can anyone help?

bought at Home-depot in Albert Lea MN. on 6/22/17
Asked by: mwendelboe
  • y_2018, m_1, d_16, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en, sid_1108, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk,
  • CLOUD, getContent, 14ms