The RIDGID® Faucet and Sink Installer is a multipurpose under-sink plumbing tool. This tool is used to fasten and remove plastic basin nuts, supply line nuts, along with 7/8" and 1" hex nuts. The tool also features an aluminum insert for turning angle stop handles, and another aluminum insert for holding strainer baskets in place. Its extra long construction makes it ideal for hard to reach applications. The RIDGID Faucet & Sink Installer is a great addition to any toolbox.
- Extra long to turn hard to reach mounting nuts on faucets, sprayers and ball cocks.
- Notched ends engage 2, 3, 4, and 6 tab basin nuts.
- Open slot allows easy access over existing supply lines.
- Shut off valve attachment turns hard to reach angle stops without marring chrome.
- Strainer basket attachment holds drain unit in place while tightening strainer nut.
- 7/8" & 1" metal or plastic hex nuts.
- Light weight, high strength plastic construction with durable aluminum inserts.
|Catalog Number||Model No.||Description||Nom. Size||Weight|
|66807||2006||Faucet & Sink Installer||10 1/4||260.00||0.77||0.35|
Faucet & Sink Installer is rated out of 5 by 10.
Rated 5 out of 5 by WEBEJA from great design, so much easier to use great design, so much easier to use. the design is versatile , rugged & easy to use.
Date published: 2017-03-30
Rated 3 out of 5 by ScottG from Led to a broken basin nut Tool worked great to disconnect the water lines as well as one basin nut but when I went to remove the other basin nut, I'm not sure if it had been tightened too much in the past or it was adhered with some corrosion but because the tool was a little bigger than the nut prongs, as I was twisting to unlock, I broke the prongs off and had to use locking pliers. It was not completely the tools fault but being I had to twist hard and the fact that it was a little loose on the prongs, it led to them being broken off which is why I gave 3 stars. Otherwise, the tool had worked nicely for the other nut and water lines. Never had any issues with my other Ridgid products though. They're great!
Date published: 2017-02-26
Rated 5 out of 5 by DemoGuy from How did I live without this tool As many of you may know installing a faucet on a kitchen sink can be a huge pain due to the limited space especially if it's a deep sink, but with this tool it practically gets rid of your knuckles scraping the back wall or the sink and let's not forget the special words that accompany the tight space. Makes for an easy an simple removal and install. If you have been looking at this saying maybe I'll get it next time, STOP, get it right now you'll be grateful you did
Date published: 2016-11-20
Rated 1 out of 5 by PaulTBray from Great design, no follow thru This needs to be engineered for real world use. Not something fictitious. Yes it has fitting to 1" inch but real world, it needs to be to 1.5". Great pictures but nothing of it acutally works. Honestlly this is designed great but doesn't fit anything in the real world. Jeez, I bought a tool that will never have a use.
Date published: 2016-03-02
Rated 4 out of 5 by TRUIII from Great features very adaptable Easy to use, worked well under the sink in limited space.
Date published: 2016-02-02
Rated 5 out of 5 by ColoradoContractor from The right tool for many under-sink jobs What a great setup. Even after using this tool for years, it's hard not to be impressed. For close quarters plumbing under a sink, it's must have tool. Securing those pesky basin tabbed nuts with ease is probably what I like most. It's a simple yet brilliant lightweight, multi-tool, and this is what makes it worth keeping handy.
Date published: 2015-10-21
Rated 5 out of 5 by deebee from Life Saver After using this wrench to remove a particularly difficult nut from a faucet in a cramped space we decided to outfit all of our service trucks with their own wrench. Truly a life saver and the labor costs saved more than justify the cost per wrench. THANKS RIDGID!!
Date published: 2014-11-25
Rated 5 out of 5 by arcmada from great tool for the price best money spent on a tool five years and going !!!!
Date published: 2014-11-25
Need different insert
the 7/8" / 1" insert isn't working. I have a 7/8" hex nut under my sink. The problem is that the 1" part of the insert hits the bottom of my sink before the 7/8" part of the insert can wrap around the nut. I need the 7/8" part to be flush with the bottom of the insert. It is recessed too far. Do you make an insert that is 7/8" flush on the bottom?
My apologies but we do not offer various inserts for this tool. The only inserts that are available are the ones that come with it origianlly.
Date published: 2014-12-30
Are these available in Australia?
HI All, I have been to the Australian website, but this product does not seem to be listed on their website. So I was wondering if it was possible to either purchase this product through an Australian distributor or purchase from the US and get it sent to Australia? Thanks
Thank you for your interest in RIDGID. This product is not available in Australia at the moment. Regards, RIDGID
Date published: 2015-12-03