Model R4110


  • 15 Amp Motor - heavy duty motor powers through the most difficult cuts
  • Extended Bevel and Miter Ranges - 0° to 48° bevel and 0° to 50° miter capacities accommodate a wide variety of cuts
  • Crown Molding Stops - Rotation stops at most common crown molding angles 0°, 15°, 22.5°, 31.6°, and 45° left and right
  • Bevel Stop - rotation stops at most common angles 0, 33.9, 45, and 48° L
  • Zero Clearance Throat Plate - gives material maximum cut-through support
  • Sliding Miter Fence - provides support for wider material. Adjusts for bevel cuts
  • 2 1/2 in. Dust Port - provides connection to standard dust collection systems to help keep work area clean
  • Work Clamp with Onboard Storage - securely holds material in place
  • Ergonomic D-Handle - for improved grip and handling


Motor 120 V AC, 15 Amps
No Load Speed 5,000 r/min. (RPM)
Blade Arbor 5/8 in.
Blade Diameter 10 in.
Weight 31 lbs.

Cutting Capacities

Baseboard Against Fence 3 1/2 in.
Crown Molding Laying Flat 4 3/4 in.
Baseboard Laying Flat 5 1/2 in.
90° Cross Cut (nominal) 2 in. x 6 in. or 4 in. x 4 in
45° Miter Cut (nominal) 2 in. x 4 in.

Ordering Information

Catalog Number Model No. Description
28513 R4110  10" Compound Miter Saw with Adjustable Laser 

Request Information


R4110 Miter Saw with Exactline™ adjustable laser guide, carbide tipped blade, dust bag, work clamp, blade wrench, Operator's Manual
1 Question | 1 Answer

Product Q&A

Back >>
1 answer


I'm curious what the total tool depth is, as well as the distance from the front to the fence, and fence to back
1 month ago
Customer avatar
Read all my Q&A
Please wait while more information about MichiganJim is loaded.
Additional information about MichiganJim could not be loaded.
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0


The R4110 10” miter measurements are as follows:

The front to back measurement is 22 in. Miter knob to fence face is 11 in. fence face to protruding dust port in the rear is another 11 in.

Front base foot edge to fence is 7 in. and fence face to rear base foot edge is 9”.

If you have further questions please contact our Technical Support Department at 866-539-1710.

Thank you
2 weeks, 6 days ago
Customer avatar
Read all my Q&A
Please wait while more information about RIDGID is loaded.
Additional information about RIDGID could not be loaded.
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
1 of 1