- Adjustable miter and bevel detents with bypass allow for quick adjustments to the most common angles
- LED cut line indication and work-light illuminates work to improve visibility and accuracy of the cut
- Powerful 15 Amp motor powers through even the most difficult materials
- Built-in-dust collection port works with common 1-1/4 in. wet/dry vacuum adapters
- Crown stop mounting holes are compatible with common stops and available RIDGID crown molding stop (not included)
- Blade brake stops blade for quicker transitions in between cuts
- Positive bevel crown molding stops at the most common angles; 0°, 15°, 22.5°, 33.9° and 45° left and right
- Positive miter stops at the most common angles 0°, 15°, 22.5°, 31.6°, 45°, 60° and 67.5° left and right
- 4,000 RPM
|Product Depth||38.75 in.|
|45 Degree Crosscut capacity max Left||2X12 or 4X6|
|90 Degree Crosscut Capacity max Left||2X16 or 4X6|
|90 Degree Crosscut capacity Max Right||2X16 or 4X6|
|Cord Length||6 ft.|
|Max cutting thickness||4 in.|
|Dust Collection||1.5 in Dust Port|
|Max degree Miter Cuts Left and Right||70|
|Max speed||4,000 RPM|
|Max miter capacity||70|
15 Amp 12 in. Corded Dual Bevel Sliding Miter Saw with 70 Degree Miter Capacity is rated out of 5 by 5.
Rated 1 out of 5 by rideralberta from Blade wobble! What seemed like a killer saw at first, quickly turned south. The motor sounded strange on startup, like a bearing was gone. But the worst of it was a wobble in the blade. I assumed I had bought a bad blade, but after sticking a Diablo on, I realized it was the saw. The Home Depot rep I spoke with said I was the fourth to fifth guy to walk in with this complaint that week! He said a recall was probably coming. No kidding. I like the detent system; love the LED lights over laser, and the general build seemed good. But if a saw can't cut straight, it's about as good as a phone that can't make a call. Returned my saw and looking at Milwaukee...
Date published: 2017-01-08
Rated 2 out of 5 by Jimmy1775 from Known Issues With Arbor Ridgid customer service is finally recognizing the defects in the arbor. I'm on my 4th saw this month. All have had the "blade wobble" due to a batch of bad abors and bearings. Ridgid CS states the engineers are working on a solution. I am sticking with this saw because once that issue is fixed this will be an outstanding addition to the construction site.
Date published: 2016-12-21
Rated 1 out of 5 by MoJoSeattle from Blade Wobble Just got the R4221 setup and guess what... Blade wobble. The interesting part is that it will spin fine and then a "shudder" goes through, enough that you can see it in the blade shadow and it shakes the blade guard side to side. This is all while holding the blade just above the wood and letting it run free. It then smooths out and does it again. My first thought is that maybe the blade brake might be momentarily engaging. If it were the arbor shaft or unbalanced blade I don't think it would be so random and intermittent. I searched Ridgid Blade Wobble and found the same comment from 2007. The first and primary purpose of a miter saw is to spin the blade. Come on Ridgid, really?
Date published: 2016-11-27
Rated 1 out of 5 by jimi76 from Blade wobble and vibration Been a faithful Ridgid buyer for a couple years now and even after receiving a different miter saw from my family for my birthday I asked them to exchange and I would pay the difference to stick with Ridgid. Friday 11-11-16 I purchased this saw at my Poughkeepsie Home Depot Store and also purchased your miter saw stand which works perfectly unlike the saw. On Monday 11-14-16 I assemble the stand and the saw and proceed to make my first cut. However theres a horrible wobble and vibration in the blade. Thinking maybe it was a bad stock blade that came with the saw I leave the job site and drive 20 minutes back to Home Depot and buy a $70 96 tooth diablo blade. Head back to the job replace the blade and try another cut. Still a horrible wobble and vibration. Now I pack the saw back up in my truck and return it to Home Depot thinking I must have got a bad saw. Home Depot is understanding and exchanges it out for another. Rain here canceled work on 11-15 but today 11-16-16 I return to the jib open the 2nd saw install the $70 blade pull the trigger and same wobble and vibration plus now I notice a bad jump when releasing the trigger. Now this model has cost me valuable time on the job over the coarse of 2 days and I have no choice but to drive back to depot and return this item. This time I returned the saw stand as well and purchased the Dewalt model which worked perfectly out of the box. Tonight I look at reviews on Home Depots site for this saw and I see it has been a major issue for many buyers. While the Dewalt isn't as versatile as the Ridgid and lacks some options at least it cuts smoothly. Sadly I am now rethinking my loyalty to ridged products.
Date published: 2016-11-17
Rated 5 out of 5 by Justbuildit from Outstanding I have been waiting years for the next generation of this saw to come out. Worth the wait great saw from the new light guide, to the crown stops not to mention the 70 degree bevel very impressed nice work ridgid
Date published: 2016-08-07
1 Question | 0 Answers
2 months ago
Additional information about GPJHome could not be loaded.
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0https://ridgid.ugc.bazaarvoice.com/answers/submit/2618-en/product/1203/question/679237/undohelpfulness.djs?authsourcetype=__AUTHTYPE__&format=embeddedhtml&innerreturn=https%3A%2F%2Fridgid.ugc.bazaarvoice.com%2Fanswers%2F2618-en%2Fproduct%2F1203%2Fquestions.djs%3Fexpandquestion%3D679237%26format%3Dembeddedhtml%26scrolltotop%3Dtrue&return=__RETURN__&sessionparams=__BVSESSIONPARAMS__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__&user=__USERID__
1 of 1
1 of 1