Manual and electro-hydraulic benders for precision cold bending of standard gas pipes up to 3". Versatile, portable benders, ideal for on-site bending as well as machine construction, boiler making and industrial applications in general.

  • Durable piston seals prevent premature leaks and maximize uptime.
  • Longer cylinder stroke per pump and optimized hand force minimizes operator fatigue.
  • Bending angle indicators reduce starts, stops and pipe removal to take measurements.
  • Single circuit hydraulic system with return spring for better control of the ram and precise bending.
  • Pressure relief valve protects the hydraulic system from over-pressurization.
  • Supplied in a wooden case and delivered with a set of bending formers for standard gas pipe applications and corner supports.

Features

  • Offers the added advantage of extra rigidity during the bending process.
  • Ideal for on-site applications.

Manually Operated

Catalog Number Model No. Description Capacity (O.D.) (in.) Weight
lb. kg
36518 HB382  Tip-Up Wing Benders (Manual)  3/8 - 2  158 7/10  72.0 
36523 HB383  Tip-Up Wing Benders (Manual)  3/8 - 3  344  156.0 
Product:
Close
An error occurred while retrieving the distributors. Please try again.
Online Stores
Find a Store Near You
An error occurred while retrieving the distributors. Please try again.

Request Information

2 Questions | 2 Answers

Product Q&A

 
 
Back >>
 
 
Please inform if we may work with following:

Copper pipe " L " type.
Stainless Steel type 304L Schedulle 10.
Stainless Steel type 304L Schedulle 40.
Do we need special accesories

We work in Refriegaration so we use a lot of copper pipe.
3 months, 2 weeks ago
Customer avatar
by
Santiago, Santiago Metropolitan Region, Chile
Read all my Q&A
 
Please wait while more information about Abel is loaded.
Additional information about Abel could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The RIDGID Hydraulic Benders are generally designed to bend the following types of pipe:
• EN 10255 Medium and Heavy Series
• ASTM A53 Schedule 40 and 80
• DIN 2440, 2441 Series
• BS 1387 Medium and Heavy Series
• GB/3091 (ISO 559) Medium and Heavy Series
Pipe with thicker walls and/or high hardness (over 75
HRb)/strength (over 66 ksi/455 MPa Tensile) may not be able to be bent. Pipe with comparable outside diameter and wall thickness to the pipes listed may be able to be bent depending on pipe material characteristics.
Pipe with thinner walls can be bent but may experience issues with kinking or buckling in the bend area. Stainless steel can be bent as long as it falls within the parameters listed above. It must be noted however

Stainless steel and other corrosion resistant materials can be contaminated during installation, joining and forming. This contamination could cause corrosion and premature failure. Careful evaluation of materials and methods for the specific service conditions, including chemical and temperature, should be completed before any installation is attempted.
3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDSupport is loaded.
Additional information about RIDGIDSupport could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 months, 3 weeks ago
Customer avatar
by
Santa Cruz, CA, USA
Read all my Q&A
 
Please wait while more information about Antisocial1 is loaded.
Additional information about Antisocial1 could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The hydraulic benders are designed to bend the following standards of pipes:
EN 10255 Medium and heavy Series
ASTM A53 Schedule 40 and 80
DIN 2440, 2441 Series
2 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDSupport is loaded.
Additional information about RIDGIDSupport could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2015-04-18T17:41:57.952-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_621, prod, sort_default
1 of 1