K-1500 Sectional Machine

K-1500 Sectional Machine

The K-1500 Sectional Machine - For 2" to 8" Drain and Sewer Lines The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster and better.

Show Less
Read More

Features

  • The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster and better.
  • Wheels to the job site – sets up fast, cleans up fast.
  • Low-profile “B” frame design will fit most crawl spaces. Loads and unloads from truck easily. Upright “A” frame features cable carrier storage during transport, ideal for in-house applications.
  • Equipped to run, easy to handle, 15’ (4.6 m) sections of 1 1/4" (32 mm) cable to clean 3" to 8" (76.2 m to 200 mm) lines to 200’ (61 m).
  • Easy clutch jaw change-out adapts K-1500 to run 15’ (4.6) sections of 7/8" (22 mm) cable through 2" to 4" (50 to 100 mm) lines up to 175’ (53 m).
  • Equipped with 3/4 HP motor. CSA approved. Approved to UL standards (NRTLC).

Ordering Information

Machine Options - A Frame
{{model}}
Catalog Number Model No. Description Voltage (V) Weight
lb. kg
23692 K-1500A  K-1500A Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose  115  135  61,30 
23702 K-1500A  K-1500A Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 1 1/4" (32 mm) (C-14) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set  * 115  256  116,10 
23712 K-1500A  K-1500A Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 1 1/4" (32 mm) (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set  * 115  256  116,10 
27592 K-1500A  Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 1 1/4" (32 mm) (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set  * 220  256  116,10 
27612 K-1500A  Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose  220  135  61,30 
"A-369-X 1 1/4" Jaw Set
Machine Options -B Frame
{{model}}
Catalog Number Model No. Description Voltage (V) Weight
lb. kg
23697 K-1500B  K-1500B Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose  115  135  61,3 
23707 K-1500B  K-1500B Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 11/4" (32 m) (C-14) Cable Total 105' (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set  115  256  116,1 
23717 K-1500B  K-1500B Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 11/4" (32 m)(C-11) Cable, Total 105' (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set  115  256  116,1 
27597 K-1500B  Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 11/4" (32 m) (C-11) Cable, Total 105' (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set  220  256  116,1 
27617 K-1500B  Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose  220  135  61,3 
27637 K-1500B  Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 11/4" (32 mm) (C-11) Cable, Total 105' (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set  220  256  116,1 
33922 K-1500B Special Kit  Machine with A-1 Mitt, A-12 Pin Key, Rear Guide Hose, four Sections 11/4" (32mm) (C11) Cable, Total 60' (18m), one A-8 Cable Carrier, T-3 funnel auger, T-50-1 shark tooth cutter and hex key.  220  210  95,0 
Cables and Leaders
{{model}}
Catalog Number Model No. Description Weight
lb. kg
24226 C-11 PC  15' (4,6 m) Standard All- Purpose Wind 3/8" Pitch with Plastic Core, Good For 4" Traps  17 3/5  8,0 
25036 C-10 PC  7/8" (22 mm) x 15' Cable with Inner Core (4,6 m)
 
10  4,5 
62275 C-10  7/8" (22 m) x 15' (4,6 m) All- Purpose Wind   9 1/2  4,3 
62280 C-11  1 1/4" (32 mm) x 15' (4,6 m) Standard All-Purpose Wind. 3⁄8" (10 mm) Pitch. Good for 4" (110 mm) Traps, 3" (75 mm) - 8" (200 mm) Lines  16  7,3 
62285 C-12  15' (4,6 m) Extra-Heavy- Duty Wind. 3/8" (10 mm) Pitch. Recommended For 4" (110 mm) - 10" (250 mm) Long Runs, No 4" (110 mm) Traps  19  8,6 
62295 C-14  15' (4,6 m) Heavy-Duty Wind. 1/2" (13 mm) Pitch. Recommended For 3" (75 mm) - 10" (250 mm) Lines Through Cleanout, No 4" (110 mm) Traps   16  6,8 
62300 C-15  15' (4,6) Extra-Flexible Wind. 1⁄2" (13 mm) Pitch. Recommended For 3" (75 mm) - 6" (150 mm) Lines Good for Traps  12  5,5 
63090 T-27  1 1⁄4" (32 mm) x 25" (63,5 cm) Leader  2 3/4  1,2 
Cable Kits
{{model}}
Catalog Number Model No. Description Weight
lb. kg
61625 A-61  Standard Equipment Tool Kit for K-60-SE, includes: –T-101 Straight Auger –T-102 Funnel Auger –T-107 Spade Cutter –T-125 Retrieving Auger –T-150-1 Sharktooth Cutter –A-3 Tool Box –A-12 Pin Key  43  19,50 
61630 A-62  Standard Equipment Cable Kit for K-60-SE, includes: – Five Sections C-10, 7⁄8" (22 mm) x 15' (4,6 m) Cable – A-8 Cable Carrier  3,60 
Accessories

{{model}}
Catalog Number Model No. Description Weight
lb. kg
59205 A-1  Left-Hand RIDGID Drain Cleaning Mitt  1/2  0,2 
59225 A-12  1/2" Cable Pin Key  1/2  0,2 
59240 A-17  Manhole Guide Pipe  23  10,4 
59295 A-2  Right-Hand RIDGID Drain Cleaning Mitt  1/2  0,2 
59320 A-369X  Jaw Assembly 1-1/4" Cable  3/4  0,3 
59325 A-368X  Jaw Assembly 7/8" Cable  3/4  0,3 
59360 A-3  Tool Box  2,3 
59395 A-34-12  12-Foot (3,7 m) Rear Guide Hose  20  9,1 
59400 A-34-15  15-Foot (4,9 m) Rear Guide Hose  20 3/4  9,4 
59415 A-34-10  10-Foot (3,1 m) Rear Guide Hose  13 3/8  6,2 
59440 A-4  Trap Spoon (30", 76 cm)  1 3/4  0,8 
59470 A-8  Cable Carrier 60' (18 m) Capacity 1 1/4" (32 mm)  5 1/2  2,5 
59475 A-9  Cable Carrier 150-Foot (45,7) Capacity 11⁄4" (32 mm)  14  6,4 
61708   Sectional Cable Carrier  33  15,0 
  • Complete carrier stand including plastic drum
61713   Sectional Cable Drum  15  6,8 
  • Plastic drum with support disk and drain plug
61718   Trident Cable Decoupler  3/4  0,3 
61723   Large Sectional Kit Toolbox W/Cutters  3,6 
  • 62840 - Straight Auger
  • 63105 - Funnel Auger
  • 59360 - Tool Box
  • 98035 - Sharktooth Cutter, 3" (75 mm)
  • 63205 - Grease Cutter, 2 1⁄2" (65 mm)
  • 61970 - Sawtooth Cutter, 2 1⁄2" (65 mm)
  • 63195 - Funnel Retrieving Auger Run Machine In Reverse
62467 A-1HD  Heavy-Duty Left-Hand RIDGID Drain Cleaning Mitt  1/2  0,2 
62472 A-2HD  Heavy-Duty Right-Hand RIDGID Drain Cleaning Mitt  1/2  0,2 
Tools
{{model}}
Catalog Number Model No. Description Replac. Blade(s)
59480 T-11  “H” Cutter, 2 1⁄2" (65 mm)  97800 
59485 T-12  “H” Cutter, 3 1⁄2" (89 mm)  97945 
61770 T-15A  Expanding Cutter, 4" - 6" (110-150 mm)  62970 
61790 T-4  Heavy-Duty Funnel Auger 
61800 T-2  Heavy-Duty Straight Auger 
61970 T-13  Sawtooth Cutter, 2 1⁄2" (65 mm)  98070 
61975 T-14  Sawtooth Cutter, 3 1⁄2" (89 mm)  98075 
62840 T-1  Straight Auger 
62845 T-10  Grease Cutter, 4 1⁄2" (114 mm)  97865 
63105 T-3  Funnel Auger 
63190 T-5  A-3565 Key 
63195 T-6  Funnel Retrieving Auger Run Machine In Reverse 
63200 T-7  Hook Auger 
63205 T-8  Grease Cutter, 2 1⁄2" (65 mm)  97920 
63210 T-9  Grease Cutter, 3 1⁄2" (89 mm)  97925 
59625 T-21  Spiral Sawtooth Cutter, 2 1⁄2" (65 mm)  97970 
59765 T-24  4-Blade Cutter, 21⁄2" (65 mm)  97940 
59770 T-25  4-Blade Cutter, 3 1⁄2" (89 mm)  97975 
59775 T-26  4-Blade Cutter, 4 1⁄2" (114 mm)  97805 
61960 T-16  Spiral Bar Cutter, 4" (110 mm)  97855 
63075 T-22  Spiral Sawtooth Cutter, 3" (75 mm)  97970 
63085 T-23  Spiral Sawtooth Cutter, 4" (110 mm)  97850 
63110 T-31  Chain Knocker, For 3"- 4" Pipe (75-110 mm)  97985 
63115 T-32  Chain Knocker, For 6" Pipe (150 mm)  97990 
63120 T-33  Chain Knocker, For 8" Pipe (200 mm)  97995 
63170 T-43  Flue Brush, 4" (110 mm) 
63185 T-47  Flue Brush, 6" 
98030 T-50  Includes 3 Sizes: 3-4-5" (75-110-127 mm) 
98035 T-50-1  Sharktooth Cutter, 3" (75 mm)  98005 
98040 T-50-2  Sharktooth Cutter, 4" (110 mm)  98010 
98045 T-50-3  Sharktooth Cutter, 5" (127 mm)  98015