Allows users to apply a signal to a cable or pipe when direct connection is not possible. The clamp cord has to be taped into the input jack for it to function properly. This clamp is used with any of our RIDGID transmitters to apply a signal to a cable or pipe when direct connection is not possible.
Model 640 features a tray for an oil can, plus a handy pipe bender. Portable yoke vise easily attaches to plank, workbench or post. My vise is super easy to use, portable, and is a real back saver when it comes to completing jobs in the field. Join the community and talk with other pros today.
Made from carbon steel in right hand configuration only. These taps are especially suited for restricted area work. Marked with drill size for pilot hole. The largest size we offer in these pipe taps would be 2", my apologies. RIDGID Tools are backed by the best coverage in the industry. Join the community and talk with other pros today.
It provides the exact size wrench you need to install angle stops and compression couplings. Rated 5 out of 5 by jasontheplumber from one of my favorite tools on my truck if you are installing or removing compression angle stops this tool is a must. Join the community and talk with other pros today.
nice and easy to use I just purchased this unit 11/05/15. Used it to locate some water lines so far in conjunction with my Navitrack II. It's fast and easy to use. RIDGID Tools are backed by the best coverage in the industry. Join the community and talk with other pros today.
Hole saw arbors with high-speed pilot drills are built for use with portable drills and drill presses. The saws are quickly replaced without tools and without removing the arbor from the chuck. RIDGID Tools are backed by the best coverage in the industry. Join the community and talk with other pros today.
The RIDGID CrossChek allows you to visually inspect where you’ve bored before you install the new utility, helping you reduce the likelihood of undetected cross bores. Works in most soil types, including wet clay and dry sand. Rated 5 out of 5 by gafixerupper from I enjoy all my Ridgid products I have many products and can find no fault with any of them, always look for more uses for other tools.Will always buy Ridgid when available. Join the community and talk with other pros today.
This set contains 20 precision tools – one each of Extractor Models 1 to 5 inclusive with turnuts, drill Models 1 to 5 inclusive, and drill guides Models 921 to 1821 inclusive. Rated 5 out of 5 by Stewart753 from Great to have Sturdy set, very durable & easy to use. Join the community and talk with other pros today.
Twist Drills is rated 5.0 out of 5 by 1. Rated 5 out of 5 by Jskforest from Use them every day on the job and they wear the best out of any I've had All my ridgid products last longer and wear better then any other brand I've used or owned. RIDGID Tools are backed by the best coverage in the industry. Join the community and talk with other pros today.
The Model 1380 Cable Cutter is designed to shear-cut insulated aluminum and copper cable through 1 3⁄8" diameter and 750 MCM*. Rated 4 out of 5 by akhendren from This product is made to last. I don't have to worry about its durbilty or if I'll get the job done with ease, it is reliable. Join the community and talk with other pros today.
Comfortable pistol-grip design, large screen and rugged anodized aluminum camera head with four bright LEDs make it easy to detect and diagnose the unreachable. That sounds like it is paired up with one of the micro reels and that message is a function of the count plus on the reel.
Updated to this newer unit and works great only thing I would change is a bigger accessory bag. Rated 4 out of 5 by Ascott from Great suction and quiet, hose needs upgrade. I think this vac out performs similar brands I've owned in the past, but I'm not satisfied with the hose quality or how it connects to the vac.
Rated 5 out of 5 by bcd1023 from great pipe cutters Rigid tools are the best by far and reasonably priced. I buy these pipe cutters along with all my other rigid tools from home depot. The adapter is usually in place on the end of the cutter when it is purchased, there should have been some brief instructions on the back of the packaging (see attached pic).
Trace any frequency from 10 Hz to 490 kHz. Trace energized lines and sondes (beacons) simultaneously. Has all the ease of use and accuracy of the SR-20 but with ALL locatable frequencies. RIDGID Tools are backed by the best coverage in the industry. Join the community and talk with other pros today.
Rated 5 out of 5 by h8trsbegone from I love this product I give 5 starts to all Rigid products. They work great for those screws that are rusty or stripped. Used just a few days ago when removing a door that had paint over all the screws and were stripped. Join the community and talk with other pros today.
The Model RT-175 Electric Soldering Gun is a lightweight, rugged electric soldering gun that sweats joints on copper tube up to 3″. Simply place the carbon tips on the copper fitting and remove when the solder begins to flow. I've gotten to the point where my acetylene tank gathers dust due to this unit's ease of use and convenience.
Can be attached to a drain cleaning cable or a water jet hose to locate the remote transmitter in a line. Can you please tell me the correct adapter for items 16728 for a 1/2" cable (my snake is item 26998)? Join the community and talk with other pros today.
The spring-loaded jaw design provides rapid ratcheting action. Unique combination heel/hook jaw design aggressively bites the work piece and ensures a secure grip. The time is saves compared to regular pipe wrenches is considerable since adjustments are not required. Rated 5 out of 5 by wanda5662 from THIS product is great This wrench makes my job as a meter service worker a lot easy.
Rated 1 out of 5 by jakehatchard from Does not suit pipe size intended I bought the 32mm, 40mm and the 50mm hammer type flaring tools about a year ago. The tool expands the pipe before it even gets to the end so it can flare. They have been collecting dust in my shed ever since they let me down.
Rated 5 out of 5 by butchalvarez from The 12-R, an industry standard My reveiw is about the legendary 12-R manual threading set. These heads do a perfect threading job consistently, each and every time. You can use these heads with the manual ratchet or for speed and ease, the electric model 700 power drive is without equal (but that's another reveiw).
Spare cutter wheel included in the knob. Rated 5 out of 5 by plumbinguy123 from Fast tutting and easy to use I have big hands and as such, have some difficulty with many tubing cutters due to their small components. This tubing cutter has a large adjustment knob and the rattaciting option saves time as well.
Conveyor head allows the pipe to move back and forth for moving material on the jobsite or loading into a threading machine. Locking ring allows for quick vertical height adjustments. Rated 4 out of 5 by Anonymous from Good and Reliable product Good and Reliable product Bought early 2014 and so far a Good and reliable product. Will see for durability but for now meet my expectation. Join the community and talk with other pros today.
Designed in conjunction with the PureFlow system fittings, ensuring total system compatibility. These jaws are the only jaws specifically needed for that brand of fitting. Especially if you have a bit of an issue with space, and trying to get the Propress jaws square to the fitting. Join the community and talk with other pros today.
Aluminum Offset Pipe Wrenches feature a jaw opening parallel to the handle and a narrower hook jaw head. Rated 5 out of 5 by Goltry from Very well made product I use a Ridgid 14"and 18" aluminum offset pipe wrench daily for more than 18 years with no problems whatsoever.
Rated 4 out of 5 by megan3 from great buy Bought this to replace my older model level and so far its been a great addition to my workday. My husband was looking for a quality level and I went out on a limb and got this for him. Light weight enough to carry in my tool bag.