Explore Emerson
Select a Country
  • {{country.Text}}
Select a Language
Select a Country
  • {{country.Text}}
Select a Language
Toggle navigation

16 Gallon Wet/Dry Vac with Detachable Blower

WD1680

16 Gallon Wet/Dry Vac with Detachable Blower

WD1680

This newly designed RIDGID® 16 gallon wet/dry vac is a multifunctional powerhouse. Its powerful motor and large drum size allow it to perform extremely well as a conventional vac. In addition, the vacuum’s power head detaches and quickly converts into a 180 peak MPH handheld blower with a locking blowing wand that outperforms most dedicated leaf blowers. The quick-release cord wrap lets you spend less time unwrapping the 20’ cord, and more time on the job. The caddy conveniently keeps your accessories and hose close at hand. It’s like two incredible tools in one.

Show Less
Read More
Where to Buy
Register Your Product

Features

  • Detachable hand held blower provides 180 mph wind for removing debris from walkways, decks, yards, driveways, job sites, tools, etc. Performance meets or exceeds that of dedicated lawn & garden leaf blowers.
  • New, dedicated blowing wand positively locks into the blowing port so it won’t blower loose.
  • 6.5 peak horsepower motor provides maximum power for the heavy-duty pickup of water & debris in the shop, basement, garage or on the job.
  • Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac.
  • Four swivel casters provide 360°, freewheeling maneuverability of the vac when pushed or pulled in any direction.
  • 7' Dual-Flex® Locking Hose resists collapsing and adds 180˚ flexibility at both hose ends. Hose locks onto vac for uninterrupted cleaning
  • Innovative accessory storage provides space for 7 individual items. No more searching or fumbling to find accessories.1-Layer Standard Pleated paper filter captures common everyday dirt.
  • 1-Layer Standard Pleated paper filter captures common everyday dirt.
  • 20’ Extra long power cord accommodates wide area cleaning.
  • Large built-in drain located at lowest point of drum for emptying of water.

Specifications

Drum Size 16 Gallons (US)
Cord Length 20 ft.
Accessory Size 2-1/2"
Net Weight 25.5
Built-In Accessory Storage Yes
Built-In Drain Yes
Casters Yes
Includes Vac, Wet Nozzle, Utility Nozzle, Car Nozzle, Blower Wand, Hose, 2 Extension Wands, Filter
Reconditioned No
Returnable 90-Day
Filter Type Cartridge
Included Filter VF4000
U.L. Listed Yes

Motor

Peak Horsepower 6.5
Air Volume (CFM)  172
Amperage (amps)  12.0
Voltage 120

Ordering Information

Ordering Information

{{model}}
Catalog Number Model No. Description Weight
lb. kg
40128 WD1680EX  16 Gallon Wet/Dry Vac w/Detachable Blower (230V)  29  13.10 
  • 72947 - VF4000 Standard Filter
  • 72937 - 2 1/2" Blower/Car Nozzle (VT2503)
  • 72902 - 2 1/2" Extension Wand - VT2508
  • 72907 - 2 1/2" Utility Nozzle - VT2509
  • 72912 - 2 1/2" Wet Nozzle - VT2510
  • 72897 - 2 1/2" x 7' Universal Vac Hose (VT2520)
WD1680EX WD1680EX  VAC, WD1680EX  29  13.10 
2 1/2" Accessories
{{model}}
Catalog Number Model No. Description Weight
lb. kg
72887 VT 2501  2 1/2" Dusting Brush (VT2501)  -  - 
72902 VT 2508  2 1/2" Extension Wand - VT2508  -  - 
72907 VT 2509  2 1/2" Utility Nozzle - VT2509  -  - 
72912 VT 2510  2 1/2" Wet Nozzle - VT2510  -  - 
72922 VT 2514  2 1/2" Floor Brush - VT2514  -  - 
72932 VT 2502  2 1/2" Crevice Tool - VT2502  -  - 
72937 VT 2503  2 1/2" Blower/Car Nozzle (VT2503)  -  - 
Kits/Hoses/Etc.
{{model}}
Catalog Number Model No. Description Weight
lb. kg
24608 VT 2570  4X Pro Hose Replacement (VT2570)  -  - 
31743 VT 1755  3 Piece Adapter Kit (VT1755)  -  - 
32703 VT 2575  Heavy Duty Cleaning Kit: 12 Piece Kit w/Stainless Steel Extension Wands (VT2575)  9.80  4.40 
41598 VT 2561  Filter Nut/Drain Cap Combo (VT2561)  -  - 
41603 VT 2571  Turbo "Beater Bar" Kit (VT2571)  -  - 
72897 VT 2520  2 1/2" x 7' Universal Vac Hose (VT2520)  -  - 
16 Gallon Wet/Dry Vac with Detachable Blower is rated 4.7 out of 5 by 389.
  • y_2018, m_10, d_19, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_389
  • loc_en, sid_461, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getAggregateRating, 17ms
  • REVIEWS, PRODUCT
Rated 2 out of 5 by from This is a great idea for vacuum if you needed it. This was not the vacuum I had purchased. I originally bought one with the car detail package, I own a detail/cleaning business and needed that vacuum, it stopped working. I wrote to ridgid and they were not to helpful, I was only told to take it back where I bought it. After some hassles and date issues, the retailer replaced my non working vacuum, however they were out of that particular vacuum, so I was given this one. Not what I wanted. We may be switching all of our tools now because of this and a few other issues.
Date published: 2018-09-06
Rated 4 out of 5 by from Decent Excellent product. Have always been a fan of the Shop-vac brand but since the started building their products requiring the use of filter bags performance has gone down. Selling point for me was the detachable blower and the lifetime warranty. Shop-vac offers a 3-5 year warranty. I have used it twice and have no complaints.
Date published: 2018-09-06
Rated 5 out of 5 by from Great product. Very satisfied Great product, very satisfied. Product is very versatile for any need
Date published: 2018-09-02
Rated 5 out of 5 by from Durability!!!! I had an older model and it lasted about 14 years. These Wet Vacs are heavy duty. I used my old one for everything and recommended to any one.
Date published: 2018-08-26
Rated 5 out of 5 by from I have not used the wet function yet but everything else is great It was not hard to put together and I like the way all the hoses and tools hang on Vac, I have not used it yet as wet Vac but the dry function works great. Good power and rolls easy. I like the long cord.
Date published: 2018-08-22
Rated 1 out of 5 by from Can be used as frying pan. Gets very hot on top of motor. My first Ridgid Wet/Dry vac (WD1680) I took back to Home Depot for refund/exchange. I tested it by running it for 20 minutes straight and the top of the motor got super hot to the touch. I could only keep my hand on it for 5 seconds before it got very uncomfortable. Now I have a WD1681 to test out the same way which Home Depot give me in exchange. If that one turns out to be another frying pan, it's also going to get returned!
Date published: 2018-08-15
Rated 5 out of 5 by from get one its powerful. has the cool leafblower feature. and stores all the accessories right on the machine!
Date published: 2018-08-12
Rated 5 out of 5 by from Great Vac Easy to put together. Love the detachable blower. It SHOULD come with the middle (fine) filter or the high (HEPA) filter. It comes with the low (cheap) paper filter. That's wrong for this high end VAC. I had to buy the HEPA and "toss" the included filter. A waste of $20.
Date published: 2018-07-24
  • y_2018, m_10, d_19, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_389
  • loc_en, sid_461, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getReviews, 2ms
  • REVIEWS, PRODUCT

starter ... on/off ... switch is not operating properly

hi ... have the wd1665 model of the 16 gallon wet/dry vac. this unit has been great, but now notice that when i switch the unit ON, sometimes I have to giggle it a little to get it to start. Any ideas on how to correct? Do these switches wear out? thanks.
Asked by: glb225
Switches can go bad and wear out. It could be just a loose connection also? I would first spray some alcohol into the switch itself and around the switch housing because sometimes the contacts of the switch get dirty. Let this dry for a minute or two and then try it and see if it works. If not then If the machine is not under warranty you should be able to take it apart by removing some screws and the unit should separate into two pieces. This should also give you access to the switch. From their you can determine if it's a loose connection or a bad switch? Hope this helps?
Answered by: ccno1
Date published: 2017-09-06

I HAVE CHANGED THE FILTER, CHECKED THE HOSE FOR DEBRIS, AND THE HOSE INTAKE PORT. MY VACUUM IS STILL WORKING AT ABOUT %50.

I have only had my unit for about a month and used it very little.
Asked by: Soccerman418
Thank you for contacting RIDGID® Customer Support. There are a number of reasons your vac may have reduced suction power. We recommend that you check the following: 1 – The most common reason for reduced performance is a clogged filter that is full of debris. Please check the condition of your filter – you may need to either clean or replace your filter. 2 - The drain cap could be loose or missing. You should check the connections. 3 – The hose may have holes or could be clogged – you should check the condition of your hose and clean or replace if necessary. 4 - The float (which is the device inside the filter cage beneath the filter) could be stuck in the upward position. Check the float - it should be moving freely. 5 – The drum is not secure to the power head. You should check to insure that the drum is properly secured to the power head. If the above recommendations do not solve your problem, please contact us and we can attempt to troubleshoot the vacuum with you. Also, if its within 90 days, you may return the vac at Home Depot for an exchange. If you have any further questions or concerns, feel free to call us at 1-800-4-RIDGID (1-800- 474-3443) or you may send your email to [email protected] Regards, RIDGID
Answered by: RIDGIDtools
Date published: 2017-09-06

can i use my 16 G, blower vac too for blow in fiber insulation?

trying to use the blower feature, but am not sure if this is possible with this model, already bought and extra 8' line, (16' total line), as the area is tight, but improperly insulated. the filter seems as it will deter this and removing the filter i think may clog up the motor. thank you in advance for all responses.
Asked by: darool
I would advise against what you are trying to do. This blower is not designed to blow things through the device. You could try to build a "fill system" and connect it to the hose itself. I am not sure if it will work, but I would give that a try before blowing insulation through the actual motor unit.
Answered by: MC24
Date published: 2017-09-06

Can you buy the blower attachment by itself.

Asked by: Wonderbread
Thank you for contacting RIDGID. Yes. You may purchase the parts and accessories separately. For a list of available parts and order online, you may visit: http://ridgidparts.com/cgi-bin/etcTable?showTable=1&table=WD16800-Figure1&image=Vac. You may also place an order over the phone through our customer service organization by calling 1-800-4-RIDGID (1-800-474-3443). If you have any further questions or concerns, feel free to call us at the number above or you may send your email to [email protected] Regards, RIDGID
Answered by: RIDGIDvacs
Date published: 2017-09-06

How do I hook an attachment to the blower?

My blower has, what looks like a vent, where the attachment should go. I cant seem to remove the vent part.
Asked by: Kathy
Did you get or can you locate your owners manual for your vac? You might even be able to go on the rigid web site and download the owners manual for your device? This should tell you how to hook up an attachment to your blower. You might even be able to find a YouTube video on it? Who knows their are videos on just about anything these days? My blower attachment locks into the blower port. Mine works like this I push the blower attachment into the blower port and then turn it clockwise until it locks into place which is great because you don't have to worry about it falling off or the blower blowing it off like on my older sears model I have. Hope this helps!
Answered by: ccno1
Date published: 2017-09-06
  • y_2018, m_10, d_19, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en, sid_461, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getContent, 22ms
  • QUESTIONS, PRODUCT
Contact Us
Have comments or questions? We'd love to hear from you.
Product Registration
RIDGID Tools are backed by the best coverage in the industry.
RIDGID Forum
Join the community and talk with other pros today.