• RP 340 Press Tool

    RP 340 Press Tool

    • Capacity: ½" – 4" (Copper and Stainless Steel), ½" – 2" (PEX)
    • 180˚ Barrel/Jaw Swivel:
    • Hydraulic Ram Output: 7,200 lbs. (32kN)
    • Weight: 8.3 lbs/3.76 kg (w/Advanced Lithium 2 Battery), 9.5 lbs/4.3 kg (w/AC Power Adapter)
    • Operating Temperature Range: 15˚F to 122˚F (-10˚C to 50˚C)
  • micro LM-400 Advanced Laser Distance Meter

    micro LM-400 Advanced Laser Distance Meter

    • Measuring Accuracy: ± 1/16 inch (±1.5mm)
    • Range: 229 feet (70 m)
    • Measuring Units: inches, feet, meters
    • Angle Range: ± 65°
    • Angle Accuracy: ± 0.5
  • Inner Tube Core Barrel Wrench

    Inner Tube Core Barrel Wrench

  • 690-I Hand-Held Power Drive

    690-I Hand-Held Power Drive

    • Capacity: 1/8" - 2" (3mm - 50mm)
    • Weight: 21.1 lbs. ( 9.59 kg) Power Drive Only
    • Size: 24.1 in. (613 mm) L x 4.75 in. (121 mm) W x 8 in. (203mm) L
    • Controls: FORWARD/REVERSE Slide Switch, ON/OFF Two-Step Momentary Contact
    • Gear Head:: Die Cast Aluminum Permanently Greased
  • 600-I Hand-Held Power Drive

    600-I Hand-Held Power Drive

    • Capacity: 1/8"-1-1/4" (3mm - 32mm) 11 R Die Heads
    • Weight: 12.7 lbs. (5.8 kg), Power Drive Only
    • Size: 20 in. (508 mm) L x 3.75 in. (95 mm) W x 7.50 in (191 mm) H
    • Controls: FORWARD/REVERSE Slide Switch. On/Off Two-Step Momentary Contact
    • Gear Head: Die Cast Aluminum Permanently Greased
  • SeeSnake® Standard Camera

    SeeSnake® Standard Camera

    • Line Capacity: 2" - 12" (5-30cm)
    • Maximum Run: 325' (99m)
    • Sonde: 512 Hz
    • Weight: 53 lbs / 19.5 kg
    • Reel Frame Diameter: 32" / 81 cm
  • SC-60C Scissor Cutter Head

    SC-60C Scissor Cutter Head

    • Capacity and Material: Interchangeable heads available for cutting up to 750 kcmil (MCM) copper/aluminum building wire and 500 kcmil (MCM) copper fine stranded wire or up to 477 kcmil (MCM) ACSR
    • : Interchangeable head is compatible with 6-ton RIDGID Electrical Tools featuring the RIDGID QuickChange System
    • : Made from a high-strength steel alloy to increase durability and lifespan of scissor cutter head
    • Approximate Cut Time: 5 seconds
    • Weight: 4.75 lbs. (2.15 kg)
  • PH-60B Knockout Punch Head

    PH-60B Knockout Punch Head

    • Capacity: Punches up to 3.5" holes in 12 gauge mild steel and 14 gauge stainless steel
    • : Interchangeable head is compatible with 6-ton RIDGID Electrical Tools featuring the RIDGID QuickChange System
    • Approximate Punch Time: 5 seconds
    • Weight: 3.5 lbs. (1.59 kg)
  • 4P-6 4PIN™ Dieless Crimp Head

    4P-6 4PIN™ Dieless Crimp Head

    • : Crimps #8AWG to 750 kcmil (MCM) copper lugs and 500 kcmil (MCM) aluminum cable or fine stranded wire
    • : Interchangeable head is compatible with 6-ton RIDGID Electrical Tools featuring the RIDGID QuickChange System
    • Approximate Crimp Time: 5 seconds
    • Weight: 5.8 lbs. (2.6 kgs)