Search - All Results
Spring-loaded handles for faster positioning. PC-1250 features a reversible blade providing two times blade life. Is not suitable for cutting multilayer tubing. PC-1375 ML has a durable aluminum construction for heavy-duty use. Easy attachable ML-adapter for improved multilayer cutting and instant re-rounding of tubing.
Share Handy for quick, clean and easy I.D. reaming and O.D. beveling of 1⁄4" (6 mm) to 1 1⁄2" (40 mm) tube. Plastic construction with long-wearing alloy steel blades. Gives fast, professional reaming on copper, aluminum, brass and other types of tubing. Warranty Full Lifetime Warranty
223S/227S Inner-Outer Reamer Share Hardened Steel Construction Inner-Outer Reamer includes 45 cutting edges on interior cone allow for fast, clean, inner reaming and outer deburring/beveling of copper and stainless steel tubing. Hardened steel construction. Dual inch/metric measurement bar.
Rugged cast aluminum housing and powerful 1/3 HP induction motor assure long life. Cutting handle adjusts to accommodate different tubing sizes. Large carrying handle for easy transport to the job site. Guide rollers ensure a straight cut with no tracking. Copper cutter wheel tested to over 10,000 cuts.
Internal Tubing Cutters are for trimming tubing below floor level for shower/floor drain installations, or above the ceiling for sprinkler head installations. Model 106 features a tool steel and aluminum body while 108 and 109P have cast iron bodies. Each model features hardened steel rollers and cutter wheels. Model 109P is equipped to cut PVC or ABS plastic.
A contoured frame allows for easy alignment while adjusting the cutter to make a cut. The bearings create a smoother cut, and allow for increased speed around the tube. Specially designed Stainless Steel cutter wheel in 35S and 65S contains bearings in the hub, to decrease drag around the tube for a smoother cut.
Simply place the carbon tips on the fitting to begin heating the joint and it can be completed in less than 20 seconds. The heat generated through the carbon tips will melt all types of soldering material – 50/50 and 95/5 included – and reach temperatures up to 750°F. Its compact design makes it ideal for reaching tight spots during repair and renovation projects and is extremely portable.
Features an enclosed feed screw to eliminate clogging and jamming, grooved rollers for close-to-flare cuts, and a fold-away reamer. X-CEL Wheel Pin – changes your cutter wheel quickly using a new ball detent design…no tool needed…no lost clips! Spare cutter wheel included in the knob.
Precision Non-Ratcheting Flare Tools This precision tool provides smooth, uniform flares with minimum effort. Hardened steel flaring cone, eccentrically mounted in needs bearings, produces rolling action for even metal flow. Gives uniform flare walls without galling. Handle clutch releases when flare is complete to iron and smooth flare. Inch and metric sizes.
X-CEL® Knob cuts tubing more quickly and easily with a larger, more ergonomic designs. X-CEL® Knob cuts tubing more quickly and easily with a larger, more ergonomic designs. Models 10, 15 and 20 feature a convenient fold-away reamer. Instruction Sheet Pipe & Tubing Cutter Replacement Wheel Guide (68.71 KB)
Share RIDGID's Close Quarter Tubing Cutters are specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing. Rollers include grooves for close-to-flare cuts on models 101, 101J and 118. The Model 118 features a special knob for easier tightening of the feedscrew.
Flares steel, stainless steel, hard copper and brass tubing - through a wall thickness of 0.035" (0.9 mm). Easy to Use - Ratcheting handle reduces effort required especially in confined areas Durable - Eccentrically mounting, hardened steel flaring cone Smooth Flares - Handle clutch releases when flare is complete to iron and smooth flare
Share Model 345 is a precision designed tool for producing 45° flares in soft copper, brass, aluminum and mild steel tubing. A hardened, smooth cone provides fast, 45° flares either single or double lap. A single clamp screw allows easy clamping and removal of tubing. Parts List 345 Manual Flare Tool Parts List (83.04 KB)
RIDGID Basin Wrenches provide fast, one-handed ratcheting that fits into tight spaces like under a sink. Tension plug holds head in any position up to 90° angle. Spring-loaded jaws of forged alloy steel provide fast, one-hand ratcheting. Telescopic shanks on Models 1017 and 1019 quickly adjust for lengths from 10" to 17".
One Stop Wrench Share The RIDGID One Stop Wrench provides the exact size wrench you need to install angle stops and compression couplings. The One Stop Wrench is two wrenches in one. Open end sizes: 9⁄16" & 15⁄16".
Heavy-Duty Offset Pipe Wrenches Share Heavy-Duty Offset Pipe Wrenches feature a jaw opening parallel to the handle and a narrower hook jaw head. Provides easy entry into tight spots. Parts List Heavy-Duty Offset Pipe Wrench Parts List (467.13 KB)
Cuts 1 1/2"-6" clay, cast-iron clay pipe or cement pipe and 4" Class 22 water main. Ratchet-action handle parallel to pipe allows for application in minimum width trenches. Complete with hand guard to protect operator’s knuckles when cutting. * Do not use more than one chain extension except for clay pipe up to 15"
Share RIDGID® Aluminum Pipe Wrenches provide professional strength in lightweight aluminum. The Aluminum Straight Pipe Wrench offers the same durability and ease-of-use found in all RIDGID heavy-duty wrenches. Parts List Parts List (239.21 KB)
Aluminum End Wrenches Share Aluminum End Wrenches are ideal for jobs in tight spaces and over-head applications. Designed for easy access in close parallel lines. Forty percent lighter than heavy-duty wrenches. Parts List
Straight Pipe Wrenches have a sturdy, ductile-iron housing and an I-beam handle with a full floating forged hook jaw, featuring self-cleaning threads with replaceable hook and heel jaws. Maintain a visible gap between the hook jaw shank and the workpiece so both heel and hook jaw teeth can grip properly.
Handles all 1½" (40 mm) to 8" (200 mm) gasketed soil pipe without extra, loose attachments. Easy assembly of Y, tee and elbow fittings, as well as straight lengths from any angle. Slim, compact design lets one man assemble even large sizes quickly and easily. Removal of handle facilitates vertical and overhead pipe assembly.
Only 17" (43 cm) long, the Model 226 is perfect for cutting cast iron, cement and clay pipe where space is limited. The Model 226 is especially suited for against-the-wall and other tight quarter applications. From the Model 226’s compact design to its unique chain latching mechanism, every feature has been engineered for maximum productivity.
Model 2-S Spiral Ratchet Reamer – Self-feeding spiral design for extra-fast and easy hand reaming. Model 2-S Reamer is not suitable for power reaming. Models 2 and 3 Ratchet Reamers – Long taper design will not dig in. Suitable for use with power drives. Hardened alloy steel cone removable for sharpening.
A square cut with minimal burr on either 21 ft (6m) or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe.
Share RIDGID® pipe extractors make easy work of removing broken threaded ends of pipe, pipe plugs and fittings. Available for schedule 40 and 80 pipe. Each is plainly marked showing drill size used when solid ends of plugs and fittings must be drilled to receive extractor. Warranty Full Lifetime Warranty