SeekTech Inductive Signal Clamp
The RIDGID SeekTech Inductive Clamp allows users to apply a signal to a cable or pipe when direct connection is not possible. Compatible with all RIDGID® transmitters.
Read More
Features
- Induces a signal onto a cable or pipe less than 119 mm (4.7 in) in diameter
- Compatible with all RIDGID SeekTech line transmitters, including the ST-305, ST-305R, ST-33Q+, and ST-510
- Additionally compatible with any comparable line transmitter which has a 10 watt or less maximum output power if frequency is under 45 kHz, and a 1 watt maximum if above 45 kHz
- Can be used with frequencies from 8 kHz to 262 kHz
- Removable and easy to store coiled cord
- Ergonomic handle for easy opening and closing
- Convenient pull tab for opening and closing in tight spaces
Specifications
| Weight | 0.5 kg (1.1 lb) |
| Height | 264 mm (10.4 in) |
| Width | 148 mm (5.8 in) |
| Depth | 36.8 mm (1.5 in) |
| Inside Diameter | 119 mm (4.7 in) |
| Cord Length | 0.75 m (2.5 ft) |
| Power Source | Line transmitter with 10 watt or less max output power with frequency < 45 kHz, or 1 watt max if > 45 kHz |
| Frequencies | 8 kHz to 262 kHz |
Support Documents
Operator's Manual
Warranty
Ordering Information
| Catalog Number | Description | Weight (lb.) |
|---|---|---|
| 20973 | SeekTech 4” (100 mm) Inductive Signal Clamp | 2 |
| 72963 | SeekTech® Inductive Signal Clamp | 1 |