- Cools threads and pipe during operation.
- Speeds metal removal.
- Improves thread quality.
- Reduces threading torque.
|Catalog Number||Description||Container Size||Containers Per Case||Weight Per Case|
|74012||Extreme Performance Thread Cutting Oil||1.0||3.8||6||50||23|
|22088||Extreme Performance Aerosol||0.1||0.4||12||12||6|
Flip top included with every quart bottle.
FBC™ System Compatible indicates that this product has been tested and is monitored on an ongoing basis to assure chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® pipe and fittings. FlowGuard Gold®, BlazeMaster®, Corzan® and FBC™ are trademarks of The Lubrizol Corporation. FBC™ is a trademark of The Lubrizol Corporation.
|Extended Die Life||X||X|
|FBC System Compatible**||X|
|Designed for Stainless Steel||X|
I have a Collins 66A Threader and the manual requires sulphur based cuttin/threading oils. Your threading oils donot list sulphur as a content
Are your oils OK to use in our Threader? Thanks
Hello! Thank you for your question. Our oils do contain a percentage of sulfur. As for the use in a Collins 66A Threader, we cannot make that determination.
Date published: 2016-04-01
Nu-Clear compatible with Dark?
I have a pipe machine that has Nu-Clear oil in it and I was curios if I could put the Dark oil in it without a compatibility problem. Do I need to drain the Nu-Clear first?
Thanks for contacting RIDGID! We recommend that the oil that was previously used (Nu-clear in this case) be drained before adding the new and different type of oil. Please let us know if you have any questions.
Date published: 2015-02-24
Need Leed Submittal Information
I am in need of Leed Information for my submittals. The Job is a Leed Platinum Project and I need to submit the VOC Content for Endura-Clear Thread Cutting Oil. The project requires that I submit the VOC content in g/L, they will not accept just the VOC %. as you have listed in the MSDS. please contact me with the VOC g/L.. Thanks
The VOC content is 10.1 g/L. Thank you for your patience. Let us know if you have any other questions.
Date published: 2015-01-21
What type of cutting oil should be used to thread aluminum pipe?
Thanks for contacting RIDGID. My apologies, we do not make threading oil specific for aluminum due to us not making dies specifically for threading aluminum. The gentlemen in the field tend to use what they are most comfortable with when threading aluminum and their other types of pipe. If you have further questions please feel free to contact our technical support agents at 800-519-3456. Thank you for your patronage and for choosing RIDGID.
Date published: 2016-02-16
LEED Information - RIDGID Dark Thread Cutting Oil
We need the VOC content in g/L for RIDGID Dark Thread Cutting Oil for our LEED project. Thanks in advance.
Thanks for contacting RIDGID. Please see attached VOC content image.
Date published: 2015-09-05