Model WD1680

This newly designed RIDGID® 16 gallon wet/dry vac is a multifunctional powerhouse. Its powerful motor and large drum size allow it to perform extremely well as a conventional vac. In addition, the vacuum’s power head detaches and quickly converts into a 180 peak MPH handheld blower with a locking blowing wand that outperforms most dedicated leaf blowers. The quick-release cord wrap lets you spend less time unwrapping the 20’ cord, and more time on the job. The caddy conveniently keeps your accessories and hose close at hand. It’s like two incredible tools in one.

Features

  • Detachable hand held blower provides 180 mph wind for removing debris from walkways, decks, yards, driveways, job sites, tools, etc. Performance meets or exceeds that of dedicated lawn & garden leaf blowers.
  • New, dedicated blowing wand positively locks into the blowing port so it won’t blower loose.
  • 6.5 peak horsepower motor provides maximum power for the heavy-duty pickup of water & debris in the shop, basement, garage or on the job.
  • Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac.
  • Four swivel casters provide 360°, freewheeling maneuverability of the vac when pushed or pulled in any direction.
  • 7' Dual-Flex® Locking Hose resists collapsing and adds 180˚ flexibility at both hose ends. Hose locks onto vac for uninterrupted cleaning
  • Innovative accessory storage provides space for 7 individual items. No more searching or fumbling to find accessories.1-Layer Standard Pleated paper filter captures common everyday dirt.
  • 1-Layer Standard Pleated paper filter captures common everyday dirt.
  • 20’ Extra long power cord accommodates wide area cleaning.
  • Large built-in drain located at lowest point of drum for emptying of water.

Specifications

Drum Size 16 Gallons (US)
Cord Length 20’
U.L. Listed Yes
Replacement Filters VF4000, VF5000, VF6000, VF7000, VF3502
Accessory Size 2-1/2"
Shipping Weight 29 lbs.
Net Weight 25.5

Motor

Peak Horsepower 6.5
Air Watts 286
Voltage 120
CFM 172
Amps 12.0

  
Catalog Number Model No. Description Weight
lb. kg
40108 WD1680  16 Gallon Wet/Dry Vac w/Detachable Blower  29  13.10 
40128 WD1680EX  16 Gallon Wet/Dry Vac w/Detachable Blower (30V)  29  13.10 
Product:
Close
An error occurred while retrieving the distributors. Please try again.
Online Stores
Find a Store Near You
An error occurred while retrieving the distributors. Please try again.

Rated 4.8 out of 5 by 205 reviewers.
  • 2016-09-29 T10:14:38.025-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_205, tr_205
  • loc_en_US, sid_461, prod, sort_default
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getAggregateRating, 158ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by Great price and Performance Can't beat the lifetime warranty along with the price and performance of this Vac. August 21, 2016
Rated 5 out of 5 by The product works great! Thank you very much any tool I get now will be RidGid I've been using it and haven't had any trouble it works great with my car and around the house work. August 19, 2016
Rated 5 out of 5 by Not disappointed with it at all!!! Amazing vaccum and easy use, great storage for the tools and powercord! Got it right for sure! August 19, 2016
Rated 5 out of 5 by Great Buy This product is a great buy it gets the job done with no problem. It has get suction and the blower works very well. There different attachments for u to get the job done right. August 18, 2016
Rated 5 out of 5 by product worked great with other products of same features Excellent product for the money. Have used it every day since purchase. August 16, 2016
Rated 4 out of 5 by Great product. Plenty of power, works great, easily accessible on board attachments. Great product overall, like all the other Rigid tools I've had. August 14, 2016
Rated 5 out of 5 by So far so good I like the convenience of the on-board tool storage and selection as well as the blower option. Easy to maneuver and not too heavy. I've notice that the motor got hot to the touch while vacuuming out my truck but it didn't hurt the performance. Time will tell. July 25, 2016
Rated 5 out of 5 by Purchased to replace an old model This was purchased to replace a previous model we had for about 10 or 12 years. I don't know if that one had a lifetime warranty or not so we simply bought the new one. This new one uses the same tools, is a bit lighter and appears to have the same power/performance. We use it only outside on a concrete patio around a pool. I have based my durability rating upon the fact that the prior model lasted well and this one has a lifetime warranty. July 6, 2016
  • 2016-09-29 T10:14:38.025-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_205, tr_205
  • loc_en_US, sid_461, prod, sort_default
2 3 4 5 8 »>>
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getReviews, 13ms
  • REVIEWS, PRODUCT
10 Questions | 19 Answers

Product Q&A

 
 
Back >>
 
 
hi ... have the wd1665 model of the 16 gallon wet/dry vac. this unit has been great, but now notice that when i switch the unit ON, sometimes I have to giggle it a little to get it to start.
Any ideas on how to correct?
Do these switches wear out?
thanks.
2 years, 4 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about glb225 is loaded.
Additional information about glb225 could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Sounds like your switch is "going"...I suggest you contact Customer Service because you have a life-time warranty.
I don't recommend you trying to fix it on your own.
1 year, 9 months ago
Customer avatar
by
Ontario, Canada
Read all my Q&A
 
Please wait while more information about Benny is loaded.
Additional information about Benny could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Switches can go bad and wear out. It could be just a loose connection also? I would first spray some alcohol into the switch itself and around the switch housing because sometimes the contacts of the switch get dirty. Let this dry for a minute or two and then try it and see if it works. If not then If the machine is not under warranty you should be able to take it apart by removing some screws and the unit should separate into two pieces. This should also give you access to the switch. From their you can determine if it's a loose connection or a bad switch? Hope this helps?
1 year, 9 months ago
Customer avatar
by
Dover, TN 37058, USA
Read all my Q&A
 
Please wait while more information about ccno1 is loaded.
Additional information about ccno1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
If the power switch of the WD1665 is not operating properly, we can send a replacement switch no charge under warranty. You should be mechanically inclined to replace the switch. Please call us directly at 1-800-474-3443 so we can place the order. You should have the serial number of the vac once you contact us.

Thanks,
RIDGID
2 years, 4 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDtools is loaded.
Additional information about RIDGIDtools could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
trying to use the blower feature, but am not sure if this is possible with this model, already bought and extra 8' line, (16' total line), as the area is tight, but improperly insulated.

the filter seems as it will deter this and removing the filter i think may clog up the motor.

thank you in advance for all responses.
1 year ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about darool is loaded.
Additional information about darool could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
I would advise against what you are trying to do. This blower is not designed to blow things through the device. You could try to build a "fill system" and connect it to the hose itself. I am not sure if it will work, but I would give that a try before blowing insulation through the actual motor unit.
3 months ago
Customer avatar
by
North Bend, WA 98045, USA
Read all my Q&A
 
Please wait while more information about MC24 is loaded.
Additional information about MC24 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Think you have your answer already in your question, it will clog blower, it's only mit to blow air "ONLY" not products.
10 months ago
Customer avatar
by
South Hill, WA, USA
Read all my Q&A
 
Please wait while more information about Retired297 is loaded.
Additional information about Retired297 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Thank you for your interest in RIDGID. The WD1680 has “detachable blower.” It has the capability to be used as a dedicated blower for yard work, patio cleanup, and garage applications to blow dust and other debris. Since this unit has a detachable leaf blower, you can run the vac with or without a filter when using it as a blower.
I hope this meets your needs.

If you have any further questions or concerns, feel free to call us at 1-800-4-RIDGID (1-800-474-3443) or you may send your email to [email protected]

Regards,
RIDGID
1 year ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDtools is loaded.
Additional information about RIDGIDtools could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
I have only had my unit for about a month and used it very little.
7 months ago
Customer avatar
by
Tennessee
Read all my Q&A
 
Please wait while more information about Soccerman418 is loaded.
Additional information about Soccerman418 could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Remove the filter then turn on the vac to see if that improves the suction, if not it is probably defective. If you have done the steps you described and still have poor performance it probably is defective. As a note if you purchased it at Home Depot you can return it for a refund within 90 days of purchase!
7 months ago
Customer avatar
by
Springfield, MO, USA
Read all my Q&A
 
Please wait while more information about j37w is loaded.
Additional information about j37w could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Answer: 
Check float valve, it may be stuck
7 months ago
Customer avatar
by
Northern Illinois
Read all my Q&A
 
Please wait while more information about AdamnCarpenter is loaded.
Additional information about AdamnCarpenter could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Thank you for contacting RIDGID® Customer Support.

There are a number of reasons your vac may have reduced suction power. We recommend that you check the following:

1 – The most common reason for reduced performance is a clogged filter that is full of debris. Please check the condition of your filter – you may need to either clean or replace your filter.

2 - The drain cap could be loose or missing. You should check the connections.

3 – The hose may have holes or could be clogged – you should check the condition of your hose and clean or replace if necessary.

4 - The float (which is the device inside the filter cage beneath the filter) could be stuck in the upward position. Check the float - it should be moving freely.

5 – The drum is not secure to the power head. You should check to insure that the drum is properly secured to the power head.

If the above recommendations do not solve your problem, please contact us and we can attempt to troubleshoot the vacuum with you. Also, if its within 90 days, you may return the vac at Home Depot for an exchange.

If you have any further questions or concerns, feel free to call us at 1-800-4-RIDGID (1-800- 474-3443) or you may send your email to [email protected]

Regards,
RIDGID
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDtools is loaded.
Additional information about RIDGIDtools could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

drain hose attachment

I am wondering where I can get a hose to fit on the drain outlet... or an adapter from the vac to a garden hose?
2 years, 6 months ago
Customer avatar
by
Des Moines, IA, USA
Read all my Q&A
 
Please wait while more information about ccyaltr is loaded.
Additional information about ccyaltr could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Have you looked at your local Home Depot or on there web site to see if their is a adapter for the drain outlet? I don't know if rigid has a web site but you could see if they do and maybe get one from there? Hope this helps!
1 year, 9 months ago
Customer avatar
by
Dover, TN 37058, USA
Read all my Q&A
 
Please wait while more information about ccno1 is loaded.
Additional information about ccno1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
The part number you will need is VT2519 hose to drain adapter.

They can be purchased at www.ridgidparts.com or through your local distributor. Please let us know if you need a distributor in your area.

Thank you
RIDGID.
2 years, 6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGID is loaded.
Additional information about RIDGID could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
My blower has, what looks like a vent, where the attachment should go. I cant seem to remove the vent part.
1 year, 10 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Kathy is loaded.
Additional information about Kathy could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Did you get or can you locate your owners manual for your vac? You might even be able to go on the rigid web site and download the owners manual for your device? This should tell you how to hook up an attachment to your blower. You might even be able to find a YouTube video on it? Who knows their are videos on just about anything these days? My blower attachment locks into the blower port. Mine works like this I push the blower attachment into the blower port and then turn it clockwise until it locks into place which is great because you don't have to worry about it falling off or the blower blowing it off like on my older sears model I have. Hope this helps!
1 year, 9 months ago
Customer avatar
by
Dover, TN 37058, USA
Read all my Q&A
 
Please wait while more information about ccno1 is loaded.
Additional information about ccno1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Thank you for your interest in RIDGID!

For our WD1680 vac, there is no part needed to be removed from the blowing port to use it as a blower. I sent an owner’s manual on the email address provided so you can have a reference on the parts included on the vac and the instruction on how to use this vac as a blower.

Regards,
RIDGID
1 year, 10 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDtools is loaded.
Additional information about RIDGIDtools could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »>>
  • 2016-09-29 T10:14:23.712-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_461, prod, sort_default
2 »>>
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getContent, 65ms
  • QUESTIONS, PRODUCT