K-1500 Sectional Machine

Features

The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster and better.
Wheels to the job site – sets up fast, cleans up fast.
Low-profile “B” frame design will fit most crawl spaces. Loads and unloads from truck easily. Upright “A” frame features cable carrier storage during transport, ideal for in-house applications.
Equipped to run, easy to handle, 15’ (4.6 m) sections of 1 1/4" (32 mm) cable to clean 3" to 8" (76.2 m to 200 mm) lines to 200’ (61 m).
Easy clutch jaw change-out adapts K-1500 to run 15’ (4.6) sections of 7/8" (22 mm) cable through 2" to 4" (50 to 100 mm) lines up to 175’ (53 m).
Equipped with 3/4 HP motor. CSA approved. Approved to UL standards (NRTLC).

Machine Options - A Frame

Catalog Number	Model No.	Description	Voltage (V)	Weight
Catalog Number	Model No.	Description	Voltage (V)	lb.	kg
23692	K-1500A	K-1500A Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose	115	135	61.30
23702	K-1500A	K-1500A Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 1 1/4" (32 mm) (C-14) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set *	115	256	116.10
23712	K-1500A	K-1500A Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 1 1/4" (32 mm) (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set *	115	256	116.10
27592	K-1500A	Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 1 1/4" (32 mm) (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set *	220	256	116.10
27612	K-1500A	Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose	220	135	61.30

* "A-369-X 1 1/4" Jaw Set

Machine Options -B Frame

Catalog Number	Model No.	Description	Voltage (V)	Weight
Catalog Number	Model No.	Description	Voltage (V)	lb.	kg
23697	K-1500B	K-1500B Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose	115	135	61.3
23707	K-1500B	K-1500B Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 11/4" (32 m) (C-14) Cable Total 105' (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set	115	256	116.1
23717	K-1500B	K-1500B Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 11/4" (32 m)(C-11) Cable, Total 105' (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set	115	256	116.1
27597	K-1500B	Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 11/4" (32 m) (C-11) Cable, Total 105' (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set	220	256	116.1
27617	K-1500B	Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose	220	135	61.3
27637	K-1500B	Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 11/4" (32 mm) (C-11) Cable, Total 105' (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set	220	256	116.1
33922	K-1500B Special Kit	Machine with A-1 Mitt, A-12 Pin Key, Rear Guide Hose, four Sections 11/4" (32mm) (C11) Cable, Total 60' (18m), one A-8 Cable Carrier, T-3 funnel auger, T-50-1 shark tooth cutter and hex key.	220	210	95.0

Cables and Leaders

Catalog Number	Model No.	Description	Weight
Catalog Number	Model No.	Description	lb.	kg
24226	C-11 PC	15' (4,6 m) Standard All- Purpose Wind 3/8" Pitch with Plastic Core, Good For 4" Traps	17 3/5	8.0
25036	C-10 PC	7/8" (22 mm) x 15' Cable with Inner Core (4,6 m)	10	4.5
62275	C-10	7/8" (22 m) x 15' (4,6 m) All- Purpose Wind	9 1/2	4.3
62280	C-11	1 1/4" (32 mm) x 15' (4,6 m) Standard All-Purpose Wind. 3⁄8" (10 mm) Pitch. Good for 4" (110 mm) Traps, 3" (75 mm) - 8" (200 mm) Lines	16	7.3
62285	C-12	15' (4,6 m) Extra-Heavy- Duty Wind. 3/8" (10 mm) Pitch. Recommended For 4" (110 mm) - 10" (250 mm) Long Runs, No 4" (110 mm) Traps	19	8.6
62295	C-14	15' (4,6 m) Heavy-Duty Wind. 1/2" (13 mm) Pitch. Recommended For 3" (75 mm) - 10" (250 mm) Lines Through Cleanout, No 4" (110 mm) Traps	16	6.8
62300	C-15	15' (4,6) Extra-Flexible Wind. 1⁄2" (13 mm) Pitch. Recommended For 3" (75 mm) - 6" (150 mm) Lines Good for Traps	12	5.5
63090	T-27	1 1⁄4" (32 mm) x 25" (63,5 cm) Leader	2 3/4	1.2

Cable Kits

Catalog Number	Model No.	Description	Weight
Catalog Number	Model No.	Description	lb.	kg
61625	A-61	Standard Equipment Tool Kit for K-60-SE, includes: –T-101 Straight Auger –T-102 Funnel Auger –T-107 Spade Cutter –T-125 Retrieving Auger –T-150-1 Sharktooth Cutter –A-3 Tool Box –A-12 Pin Key	43	19.50
61630	A-62	Standard Equipment Cable Kit for K-60-SE, includes: – Five Sections C-10, 7⁄8" (22 mm) x 15' (4,6 m) Cable – A-8 Cable Carrier	8	3.60

Accessories

Click on a Catalog Number link to view its Standard Equipment.

Catalog Number	Model No.	Description	Weight
Catalog Number	Model No.	Description	lb.	kg
59205	A-1	Left-Hand RIDGID Drain Cleaning Mitt	1/2	0.2
59225	A-12	1/2" Cable Pin Key	1/2	0.2
59240	A-17	Manhole Guide Pipe	23	10.4
59295	A-2	Right-Hand RIDGID Drain Cleaning Mitt	1/2	0.2
59320	A-369X	Jaw Assembly 1-1/4" Cable	3/4	0.3
59325	A-368X	Jaw Assembly 7/8" Cable	3/4	0.3
59360	A-3	Tool Box	5	2.3
59395	A-34-12	12-Foot (3,7 m) Rear Guide Hose	20	9.1
59400	A-34-15	15-Foot (4,9 m) Rear Guide Hose	20 3/4	9.4
59415	A-34-10	10-Foot (3,1 m) Rear Guide Hose	13 3/8	6.2
59440	A-4	Trap Spoon (30", 76 cm)	1 3/4	0.8
59470	A-8	Cable Carrier 60' (18 m) Capacity 1 1/4" (32 mm)	5 1/2	2.5
59475	A-9	Cable Carrier 150-Foot (45,7) Capacity 11⁄4" (32 mm)	14	6.4
61708		Sectional Cable Carrier	33	15.0
Standard Equipment Complete carrier stand including plastic drum
61713		Sectional Cable Drum	15	6.8
Standard Equipment Plastic drum with support disk and drain plug
61718		Trident Cable Decoupler	3/4	0.3
61723		Large Sectional Kit Toolbox W/Cutters	8	3.6
Standard Equipment 62840 - Straight Auger 63105 - Funnel Auger 59360 - Tool Box 98035 - Sharktooth Cutter, 3" (75 mm) 63205 - Grease Cutter, 2 1⁄2" (65 mm) 61970 - Sawtooth Cutter, 2 1⁄2" (65 mm) 63195 - Funnel Retrieving Auger Run Machine In Reverse
62467	A-1HD	Heavy-Duty Left-Hand RIDGID Drain Cleaning Mitt	1/2	0.2
62472	A-2HD	Heavy-Duty Right-Hand RIDGID Drain Cleaning Mitt	1/2	0.2

Tools

Catalog Number	Model No.	Description	Replac. Blade(s)
59480	T-11	“H” Cutter, 2 1⁄2" (65 mm)	97800
59485	T-12	“H” Cutter, 3 1⁄2" (89 mm)	97945
61770	T-15A	Expanding Cutter, 4" - 6" (110-150 mm)	62970
61790	T-4	Heavy-Duty Funnel Auger	-
61800	T-2	Heavy-Duty Straight Auger	-
61970	T-13	Sawtooth Cutter, 2 1⁄2" (65 mm)	98070
61975	T-14	Sawtooth Cutter, 3 1⁄2" (89 mm)	98075
62840	T-1	Straight Auger	-
62845	T-10	Grease Cutter, 4 1⁄2" (114 mm)	97865
63105	T-3	Funnel Auger	-
63190	T-5	A-3565 Key	-
63195	T-6	Funnel Retrieving Auger Run Machine In Reverse	-
63200	T-7	Hook Auger	-
63205	T-8	Grease Cutter, 2 1⁄2" (65 mm)	97920
63210	T-9	Grease Cutter, 3 1⁄2" (89 mm)	97925
59625	T-21	Spiral Sawtooth Cutter, 2 1⁄2" (65 mm)	97970
59765	T-24	4-Blade Cutter, 21⁄2" (65 mm)	97940
59770	T-25	4-Blade Cutter, 3 1⁄2" (89 mm)	97975
59775	T-26	4-Blade Cutter, 4 1⁄2" (114 mm)	97805
61960	T-16	Spiral Bar Cutter, 4" (110 mm)	97855
63075	T-22	Spiral Sawtooth Cutter, 3" (75 mm)	97970
63085	T-23	Spiral Sawtooth Cutter, 4" (110 mm)	97850
63110	T-31	Chain Knocker, For 3"- 4" Pipe (75-110 mm)	97985
63115	T-32	Chain Knocker, For 6" Pipe (150 mm)	97990
63120	T-33	Chain Knocker, For 8" Pipe (200 mm)	97995
63145	T-38	Flue Brush, 1 1⁄2" (40 mm)	-
63160	T-41	Flue Brush, 3" (76 mm)	-
63165	T-42	Flue Brush, 3 1⁄2" (89 mm)	-
63170	T-43	Flue Brush, 4" (110 mm)	-
63240	T-45	Flue Brush, 5" (127 mm)	-
98030	T-50	Includes 3 Sizes: 3-4-5" (75-110-127 mm)	-
98035	T-50-1	Sharktooth Cutter, 3" (75 mm)	98005
98040	T-50-2	Sharktooth Cutter, 4" (110 mm)	98010
98045	T-50-3	Sharktooth Cutter, 5" (127 mm)	98015