- RIDGID die head retaining system is a simple twist and release for the 1 1/2", 2" Die Heads and Die Head Adapter.
- Lightweight and portable for maintenance, repair and service plumbers.
- Over molded handle and contoured grip provide optimal control.
- Screw-in brush covers improve serviceability.
- Durable die cast gear housing and fiberglass reinforced plastic body to withstand demanding job site conditions.
- Dual "V" Jaw Support Arm firmly prevents slipping.
|Capacity||1/8" - 2" (3mm - 50mm) 11 R Die Heads.|
|Weight||21.1 lbs. ( 9.59 kg) Power Drive only.|
|Size||24.1 in. (613 mm) L x 4.75 in. (121 mm) W x 8 in. (203mm) L.|
|Controls||Forward/reverse slide switch, on/off two-step momentary contact.|
|Gear Head:||Die cast aluminum permanently greased.|
|Body & Handle||Durable heavy-duty fiberglass reinforced plastic.|
|Catalog Number||Model No.||Description||RPM||Voltage (V)||Frequency (Hz)||Phase||Amp Draw (A)||Power||Weight|
|44933||690-I||Power Drive 1/2" - 2" BSPT Die Head, Case & Support Arm||32||230||1||1||5||1020W||57.2||26.0|
|44938||690-I||Power Drive 1/2" - 2" BSPT Die Head, Case & Support Arm (Switzerland Only)||32||230||1||1||5||1020 W||57.2||26.0|
|44943||690-I||Power Drive 1/2" - 2" BSPT 11R Die Heads, Case & Support Arm||36||115||50||1||12||1270W||57.2||26.0|
|44923||690-I||Power Drive 1/2" - 2" NPT Die Heads, Case, & Support Arm||36||115||60||1||12||1020 W||59.4||26.9|
|44928||690-I||Power Drive Only W/ Case and Support Arm||36||115||60||1||12||1020 W||42.4||19.2|
|44948||690-I||Power Drive Machine Only||36||115||50||1||12||1270W||21.1||9.6|
|44953||690-I||Power Drive Machine Only||32||230||1||1||5||1020W||21.1||9.6|
|44958||690-I||Power Drive Machine Only (Switzerland Only)||32||230||1||1||5||1020W||21.1||9.6|
|Catalog Number||Model No.||Description||Weight|
|45928||692||692 Support Arm||7.0||3.2|
|46673||690-I Carrying Case||-||-|
|39187||11-R Ratchet Ring||1.1||0.5|
|10883||418||Oiler with One Gallon Premium Thread Cutting Oil||20.5||9.4|
|16703||425||425 1/8" - 2-1/2" Portable TRISTAND Chain Vise||32.0||14.5|
|36273||460-6||460-6 1/8" - 6" Portable TRISTAND® Chain Vise||42.8||19.4|
Frequently Purchased Dies
|45848||1/8 RH BSPT Dies, Black Oxide|
|45853||1/4 RH BSPT Dies, Black Oxide|
|45858||3/8 RH BSPT Dies, Black Oxide|
|45863||1/2 RH BSPT Dies, Black Oxide|
|45868||3/4 RH BSPT Dies, Black Oxide|
|45878||1-1/4 RH BSPT Dies, Black Oxide|
|45873||1" RH BSPT Dies, Black Oxide|
|45883||1-1/2 RH BSPT Dies, Black Oxide|
|45888||2" RH BSPT Dies, Black Oxide|
|37825||12R ½” NPT DIES|
|37830||12R 3/4” NPT DIES|
|37835||12R 1” NPT DIES|
|37840||12R 1-1/4” NPT DIES|
|37845||12R 1-1/2” NPT DIES|
|37850||12R 2” NPT DIES|
|37870||12R ½” NPT HIGH SPEED DIES|
|37875||12R 3/4” HIGH SPEED NPT DIES|
|37880||12R 1” NPT HIGH SPEED DIES|
|37885||12R 1-1/4” HIGH SPEED NPT DIES|
|37890||12R 1-1/2” HIGH SPEED NPT DIES|
|37895||12R 2” NPT HIGH SPEED DIES|
690-I Hand-Held Power Drive is rated out of 5 by 4.
Rated 1 out of 5 by emmech from Lousy die Purchased and needed to run a 2” iron pipe gas line, 2” die was defective. Spent time on the phone with Ridgid, supply house we purchased it thru came to job site to assist...after much wasted time, money, and material, Ridgid tech support agreed die was defective. Was completely embarrassed by performance of this tool in front on the customer. So here we are now behind on the job schedule since we have no die for this machine while replacement is being shipped. I will go out of my way to make sure my company never purchases a Ridgid tool again. The only good experience was the support and concern my company got from the supplier.
Date published: 2018-03-29
Rated 5 out of 5 by MVpAce from Very very versatile as long as you can clamp it. This unit has carried us forward and allowed us to complete many small piping jobs. The biggest challenge is manually running our hand pump oiler and getting the oil to flow fast enough. The oiler tube became work hardened and we put up with it for some time until the hook was broken, we purchased a new oiler pump and tube assembly which works great and is much easier to manage with a flexible tube. Minor issues with cutting heads which we relate to the oiling challenge. We've been able to win some great jobs having this unit.
Date published: 2014-12-08
Rated 5 out of 5 by benji86 from great product great product easy to use we use it on tubing that can not be removed from ceiling or on special tubing ...bent tubing
Date published: 2014-11-25
Rated 4 out of 5 by mg5109 from convienent easy to use portable easy to use good quality dies and powerhead 1 1/4 pipe thread no problem portable lightweight can be used on bench or in the field. durability it has lasted for ten years now and still works great. best threader that i have purchased in the last twenty years
Date published: 2014-11-24