Model WD1270

This newly designed RIDGID® 12 Gallon High Performance Wet/Dry Vac is designed for Pro’s and DIY’ers who want a traditionally styled, medium sized vac that delivers the powerful performance and rugged durability required for job site clean-up. Its 5.0 peak HP motor delivers the suction power necessary to handle tough clean-up chores. This vacuum’s 12 gallon drum size results in a more compact design that requires less storage space on a service truck, in the shop, or in the garage. However, it still offers the capacity to handle large messes.

Features

  • 5.0 Peak HP Motor provides the powerful suction needed for efficient clean up of tough messes
  • 12 Gallon drum provides capacity for clean-up of large spills & messes at job-sites and busy shops
  • With the vacuum inlet in the drum, this vac will accept dust collection bags making dry cleanup even easier
  • 4 Swivel Casters provide easy 360° mobility
  • Accessory storage space built into the caster feet and hose storage on the lid allows quick access to all the provided attachments
  • Medium size of vac requires a smaller storage space to store or transport this vac
  • Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac
  • 1-Layer Standard pleated paper filter captures common everyday dirt
  • Dual-Flex® Locking Hose resists collapsing and adds 180˚ flexibility at both hose ends. Hose locks onto vac for uninterrupted cleaning
  • Long 15’ Power Cord allows quick cleaning over a large area
  • Powerful exhaust airstream can be directed through the vac hose to blow debris from garages, decks, and sidewalks
  • Large Built-In Drain located to lowest point of drum for emptying of water

Specifications

Drum Size 12 Gallons (US)
Peak HP 5.0
Air Watts 227
Voltage 120
CFM 145
Amps 10.0
Cord Length 15’
U.L. Listed Yes
Replacement Filters VF4000, VF5000, VF6000, VF3502, VF7000
Accessory Size 2 1/2"
Net Weight 16.5 lbs.

Rated 4.7 out of 5 by 161 reviewers.
Rated 5 out of 5 by a name you can trust. Best shop vac for the money; plus the lifetime warranty. This thing sucks for real. My basement flooded with all the rain and I shopped vac it in 30 mins. The thing was not even full when I got done; very well made. July 21, 2015
Rated 4 out of 5 by very satisfied with this and all of my RIDGID products! Upgraded from a 15+ year old 6 gallon craftsman shopvac. Needed something with larger hose to hook up to router table and so far it does great at keeping the area clean. Also works great sucking up other saw dust, leaves and whatever else ends up on my garage floor. July 7, 2015
Rated 5 out of 5 by Two weeks I've only had it for two weeks for 89.00 out the door its amazing. The 6HP motor sucks up everything and it was worth every penny. Also mine came with a car tool accessories and it works great. I just wish there was a way to attach all parts to the vacuum. But very very pleased July 6, 2015
Rated 5 out of 5 by 12 GALLON WET/DRY VAC Where do I start, I used to be a craftsman guy but I just recently made the jump to Ridgid and have not looked back. I made the jump because of the life time coverage they offer on their products. I recently purchased this vac to replace my craftsman vac that had little to no power. I am very impressed with the performance and durability of this of this vac. I use it quite a bit with all my tools and my wood working products. July 3, 2015
Rated 5 out of 5 by Strong vacuum Great vacuum that really "sucks" :-) I have nothing bad to say about this product so far. July 1, 2015
Rated 5 out of 5 by Quiet - Very important in Kennels - Great retailer Great features. Quiet. Just purchased a second one June 30, 2015
Rated 5 out of 5 by great suction and not very loud. good vac overall. great suction and not very loud. good vac overall. June 30, 2015
Rated 4 out of 5 by Great suction Overall a great product. Small and compact but great suction. It would be nice if it had a hose holder yet when you wrap it around to store it. June 29, 2015
  • 2015-08-03T15:39:47.256-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_161, tr_161
  • loc_en_US, sid_364, prod, sort_default
2 3 4 5 7 »>>
5 Questions | 11 Answers

Product Q&A

 
 
Back >>
 
 
I lost my booklet and would like to pick up the last bit of water in the bottom of my hot tub after draining? My vac is not the new version.
1 year ago
Customer avatar
by
Oregon, USA
Read all my Q&A
 
Please wait while more information about shopdummy is loaded.
Additional information about shopdummy could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your interest in RIDGID!

If you are picking up clean water, the pleated paper filter should be removed.

When picking up small amounts of liquid the paper filter may be left in place. Please note that when the filter becomes saturated, misting may occur at the blower port. To further protect the motor of the vac, there is a wet filter (VF7000 part number) available. This filter can only be used for 5 gallon and larger vacs. The VF7000 filter is available at any local Home Depot store or it can be purchase through our Customer Service organization over the phone 1-800-4-RIDGID (1-800-474-3443) or on-line at www.ridgidparts.com.

Additionally, when picking up large volume of liquids, the liquid in the drum may reach a predetermined level and the float mechanism will rise automatically to cut off airflow. This occurs to avoid liquids from entering the power head. When this happens, turn off the vac, unplug the power cord, and empty the drum. For this reason, it is important NOT to leave the vac running unattended during operation.

Before storage, the filter must be dried to avoid possible mildew and damage to the filter. We recommend that you clean or wash the filter then let it air dry overnight. Please check the filter for holes or tears after each cleaning. The filter might need to be replaced if it has any damage.

Regards,
RIDGID
11 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDtools is loaded.
Additional information about RIDGIDtools could not be loaded.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Answer: 
You have to remove the filter bag (if you have one installed ) and also repave the standard paper cone filter with the sponge filter before you vacuum up water
8 months ago
Customer avatar
by
Toronto, ON, Canada
Read all my Q&A
 
Please wait while more information about SteveinTO is loaded.
Additional information about SteveinTO could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Take out the dry filter and you are ready to go.
8 months ago
Customer avatar
by
Virginia, United States
Read all my Q&A
 
Please wait while more information about Michael is loaded.
Additional information about Michael could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Just make sure you have removed the filter inside and suck up the water!!

These are easy vacuums to use!! :o)
6 months ago
Customer avatar
by
Leesburg, FL, USA
Read all my Q&A
 
Please wait while more information about mousemotors is loaded.
Additional information about mousemotors could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
I've been trying to find the proper vacuum bag and how to attach/install it into this vacuum that I've had for years. Anybody have a solution? I'm heading to the HD this afternoon to see what they say.
User submitted photo
1 year, 9 months ago
Customer avatar
by
Guelph, ON, Canada
Read all my Q&A
 
Please wait while more information about Javre123 is loaded.
Additional information about Javre123 could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for contacting RIDGID® Customer Support.

We are happy to inform you that your WD1270 is capable of carrying a filter bag. Please use the VF3502 filter bag.

We hope this information helps. If you have any further questions or concerns, feel free to call us at 1-800-4-RIDGID (1-800-474-3443) or you may send your email to [email protected]

Thank you
RIDGID
1 year, 8 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGID is loaded.
Additional information about RIDGID could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
HD has the generic 9 to 15 gallon vac bags that are a bit too long but work anyway. These are the ones I use.
8 months ago
Customer avatar
by
Toronto, ON, Canada
Read all my Q&A
 
Please wait while more information about SteveinTO is loaded.
Additional information about SteveinTO could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
5 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about chbelt is loaded.
Additional information about chbelt could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your interest in RIDGID!

The gap between the lid (top) and the drum (bottom) will create a tight vacuum seal during operation. We do not have a rubber gasket available but you can use a weather stripping if you like a tight fit during non-operation.

If you have any further questions or concerns, feel free to call us at 1-800-4-RIDGID (1-800-474-3443) or you may send your email to [email protected]

Regards,
RIDGID
5 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDtools is loaded.
Additional information about RIDGIDtools could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
I am not sure, mine doesn't have one either. But I am thinking about running a small bead of rtv silicone in the groove where I think there should be one. My top is loose when it is locked on.
4 months ago
Customer avatar
by
Hamilton, VA 20158, USA
Read all my Q&A
 
Please wait while more information about Ajeepthing91 is loaded.
Additional information about Ajeepthing91 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
In the previous question about bags for this model, the answer give was to use the VF3502 filter bags. However, the instructions for installing the bag on the 2 rib inlet tube don't match the anatomy of the WD1270, which has an inlet tube that is molded into the body at the bottom so the cardboard collar cannot be attached.
1 year, 2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about haphaz is loaded.
Additional information about haphaz could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
You will need to punch a hole on the cardboard before sliding it over the inlet tube inside the drum.

If you have any further questions or concerns, feel free to call us at 1-800-4-RIDGID (1-800-474-3443) or you may send your email to [email protected]

Regards,
RIDGID
1 year, 2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDtools is loaded.
Additional information about RIDGIDtools could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
I didn't have a problem...the bag seemed to fit and hold for me.
4 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Beejer47 is loaded.
Additional information about Beejer47 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
I hooked hose to vacuum port and it worked well.
I turned it off
I returned later, turned it on and blower port was on,.. with hose in vacuum port.

Cant get it to vacuum again.
3 months, 2 weeks ago
Customer avatar
by
Utah
Read all my Q&A
 
Please wait while more information about LikeClean is loaded.
Additional information about LikeClean could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your interest in RIDGID!

We would like you to know that there is no way to stop the air coming out from the exhaust port. The RIDGID® vacuum and blower ports would be functioning at the same time. You just need to attach the hose to whichever port is applicable to the job. Air will be drawn into the vacuum through the suction port and exit through the blower port. The debris that has been picked up by the vacuum should be captured by the filter. With the correct filter properly installed, only clean air would be exiting the exhaust. Installing an air diffuser (part number VT2525) would help diffuse the strength of the air and reduce the noise from the vacuum.

We hope this meets your needs. If you have any further questions or concerns, feel free to call us at 1-800-4-RIDGID (1-800-474-3443) or you may send your email to [email protected]

Regards,
RIDGID
3 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDtools is loaded.
Additional information about RIDGIDtools could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2015-08-03T15:39:41.907-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_364, prod, sort_default
1 of 1