- Classified to UL 1976 for Copper Connectors and Wire From #8AWG to 600 Kcmil and Aluminum Connectors and Wire From #8AWG to 350 Kcmil
- Quick release latching system for maximum efficiency
- Crimp dies quickly snap into head – no push button or adapters to change dies
- Slim compact design and 360° head rotation enables access to tight spaces
- Compatible with 6 Ton dies from RIDGID and other manufacturers*
- LR-60B designed for 6-Ton U Dies ONLY
*For the most up to date RIDGID Crimp Die/Electrical Connector Compatibility Charts, go to www.RIDGID.com/CrimpDies.
|Crimp Capacity||Up to 600 Kcmil (300mm²) Copper and 350 Kcmil (240mm²) Aluminum Wire and Connectors|
|Approximate Cycle Time||5 seconds|
|Crimp Head Weight||3.3 lbs (1.5kg)|
|LR-60B Crimp head can be purchased as part of a kit for the RE 6 / RE 60 Electrical Tool or as a separate crimp head to add to an existing kit|
6 Ton Copper Dies
6 Ton Aluminum Dies
Is it possible use dies from other brand (not RIDGID) with the LR-60 Latching Round Crimp Head?
The dies from other manufacturers are compatible with RE60 Tool?
The LR-60 has been designed for use with industry standard 60 kN dies. To see the complete list of Lugs and Dies that have been tested and approved by RIDGID please see the compatibility guide posted at www.ridgid.com/crimpdies.
Date published: 2017-09-06
Is there going to be a carry case for the jaw and dies
I have a first issue RE-6, just now coming into newer attachments. Only problem is no storage. Is there any works into providing attachment storage?
Hi, thanks for your inquiry. If you have the first generation tool, you most likely have the first generation punch head which means then new swivel punch head will not fit in your case. Therefore, you will have to purchase a new case Cat#: 52083 which will fit both old and new punch heads.
Date published: 2017-09-26