• K-1 Combination Auger

    K-1 Combination Auger

    • Pipe Sizes Up to 2" (50 mm):
    • Cable Length: 4 ft (1.2 m)
    • Cable Diameter: 3/8" (10 mm)
    • Operation: Manual or Drill Powered
    • Applications: Urinals & Shower Drains
  • RP 340 Press Tool

    RP 340 Press Tool

    • Capacity: ½" – 4" (Copper and Stainless Steel), ½" – 2" (PEX)
    • 180˚ Barrel/Jaw Swivel:
    • Hydraulic Ram Output: 7,200 lbs. (32kN)
    • Weight: 8.3 lbs/3.76 kg (w/Advanced Lithium 2 Battery), 9.5 lbs/4.3 kg (w/AC Power Adapter)
    • Operating Temperature Range: 15˚F to 122˚F (-10˚C to 50˚C)
  • Inner Tube Core Barrel Wrench

    Inner Tube Core Barrel Wrench

  • SeeSnake® Standard Camera

    SeeSnake® Standard Camera

    • Line Capacity: 2" - 12" (5-30cm)
    • Maximum Run: 325' (99m)
    • Sonde: 512 Hz
    • Weight: 53 lbs / 19.5 kg
    • Reel Frame Diameter: 32" / 81 cm
  • 690-I Hand-Held Power Drive

    690-I Hand-Held Power Drive

    • Capacity: 1/8" - 2" (3mm - 50mm) 11 R Die Heads
    • Weight: 21.1 lbs. ( 9.59 kg) Power Drive Only
    • Size: 24.1 in. (613 mm) L x 4.75 in. (121 mm) W x 8 in. (203mm) L
    • Controls: FORWARD/REVERSE Slide Switch, ON/OFF Two-Step Momentary Contact
    • Gear Head:: Die Cast Aluminum Permanently Greased
  • 7 1⁄4" Circular Saw

    7 1⁄4" Circular Saw

    • Input: 120V AC, 15.0 Amps
    • No Load Speeds: 5,800 r/min (RPM)
    • Arbor Size: 5⁄8"
    • Blade Diameter: 7-1⁄4"
    • Depth of Cut Capacity: 0º: 2-3⁄8" 45º: 1-3⁄4" 51.5º: 1-5⁄8"
  • 1/2" VSR Hammer Drill

    1/2" VSR Hammer Drill

    • Input: 120 V AC, 7.5 Amps
    • No Load Speed: 0-2,700 r/min. (RPM) 0-51,000 BPM
    • Chuck Capacity: 1/2 in.
    • Tool Weight: 5.0 lbs.
    • Cord Length: 8 ft.
  • 4 ½" Angle Grinder

    4 ½" Angle Grinder

    • Input: 120V AC, 8 Amps
    • No Load Speed: 11,000 r/min. (RPM)
    • Spindle Thread Size: 5/8 in-11UNC
    • Tool Weight: 6 lbs.
  • 18V Ultra Compact Hammer Drill/Driver

    18V Ultra Compact Hammer Drill/Driver

    • Volts: 18V
    • Torque: 550 in-lbs.
    • Speed (No Load) : 0-450 / 0-1,650 RPM 0-5,850 / 0-21,450 BPM
    • Chuck: 1/2-in. Locking Jaws