- Compact, lightweight design.
- One-piece aluminum housing.
- Two easy-to-use carrying handles.
- Integral foot switch hanger.
- Powerful motor and transmission.
- Through die head oiling.
- Adjustable oil flow control.
- Approved by CSA to CSA and UL standards (115V only)
|Pipe Capacity||1/4"-1 1/2" (6mm-37mm).|
|Bolt Capacity||5/16"-1" (6mm-25mm).|
|Motor Control||On/off heavy-duty switch and integral foot switch.|
|Front Chuck||Hammer type with replaceable rocker action jaw inserts.|
|Rear Centering Device||Cam action.|
|Oiling||Through die head adjustable.|
|Pump||Self-priming constant flow, gerotor type.|
|Catalog Number||Model No.||Description||Die Head||RPM||Voltage (V)||Frequency (Hz)||Phase||Motor Type||Amp Draw (A)||Power||Weight|
|61142||1215||1/2" - 1 1/2" NPT Hammer Chuck Machine||811A||44||115||60||1||Universal||24||1/2 HP||80||36.00|
|Catalog Number||Model No.||Description||Weight|
|61187||1203||1203 Tripod Stand||15||-|
|62457||1219||1219 NPT Nipple Chuck for 1215 Threading Machine||5 3/4||-|
|97045||531||531 1/4"-1"Bolt Die Head Quick-Open R.H./L.H.||7 1/2||3.40|
|84537||816||816 1/8” - 3/4” NPT Die Head, Semi-Automatic, RH||13||5.90|
|84532||817||817 1” - 2” NPT Die Head, Semi-Automatic, RH||13||5.90|
|41620||-||Gearhead Motor Grease||1 1/10||0.50|
Model 1215 Threading Machine is rated out of 5 by 3.
Rated 4 out of 5 by Morgan from Excellent machine, IF this whole kit is exactly what you are looking for the 1215 is a solid machine, though I sincerely wish it was sold as a platform with options, rather than a kit. My company needed the 815a head but couldn't afford to buy that head on top of the 811 head the 1215 comes with, and we weren't able to find a vendor to swap the brand new 811 for an 815a and let us pay the difference. This minimizes the utility of the tool for our intended purposes; very disappointing. the tool itself functions great. Also, it would have been helpful to indicate in the manual that the centering chuck, gripping chuck, and cutting head are not supposed to be level - they are at about a 13 degree slope (plan your pipe rests accordingly)...
Date published: 2016-06-13
Rated 4 out of 5 by GRC0057 from Product works better than expected Great machine the only problem is the oil catch trays are very poor type of plastic both were damaged during shipping, and leak oil all over floor.
Date published: 2016-03-15
Rated 5 out of 5 by steveb from Fantastic little machine Ease of use, lightweight, portable I have nothing bad to say about this machine we have owned it for years and it is still an rxcellent threading machine
Date published: 2014-11-25