- Rapid pass-thru cord access - Allow easy power cord access for battery charging
- Flexi-shelf - 8” adjustable bin storage
- Permanently retained lock with recessed shackle - Saves time, prevents lost locks and access by saws, pry bars and cutters (Lock not included)
- Fully arc welded construction - Tighter tolerances en sures durability
- Overlapping cover design - Superior weather resistance and security
- Durable baked enamel finish - Provides heavy-duty, long lasting protection
- Corner located lock housing - Prevents corner pry-ins; maximizes internal storage and access
- Solid lock tang - For superior security and pry resistance
- Ergonomic, recessed handles - 90-degree stop provides maximum leverage
- Full-length cover handle - Slip resistant, easy to grip along entire cover length
- Locking cover support - Secures cover in open position, prevents accidental closure
- Solid 1-piece 12 ga. skids - With wide base for greater strength and stability
|Construction||Arc Welded, 16 Ga. Steel|
|Dimensions||(48" x 24" x 28")|
|Usable storage||16 Cu. Ft.|
|Shipping weight||149 lbs.|
2048 On-Site Storage Chest is rated out of 5 by 57.
Rated 4 out of 5 by WoodyWoodpecker from Great box. The box is a little tall for a small pickup but just right for a full size pickup. This would be a great solution for someone that the over the bed typical toolbox just doesn't cut it. Loads in and out easily and could be left at the jobsite for safe tool storage.
Date published: 2017-04-19
Rated 5 out of 5 by Cliftonjosh from Awesome jobsite box and does the job. Love this box. Plenty of room and great storage. The eels look like quality compared to all the boxes I looked at. The only think I wish is that there was another tray other than the plastic one. Maybe a metal one that sits a little lower. Other than that, thumbs up!
Date published: 2017-03-29
Rated 4 out of 5 by prcliff from Water Tight I am using as an outside tool box in the back bed of pick up truck. I purchased the box a couple weeks ago and so far no leaks, and the paint is holding up. More room in this box compared to conventional truck tool boxes.
Date published: 2017-01-30
Rated 4 out of 5 by DWC1421 from This is a great item my second job box bought, 1st got to small. all my power tools, cordless tools, and elect. cords, shop vacs. are Ridgid. thanks for great items
Date published: 2016-12-13
Rated 5 out of 5 by Jtdavis36 from Great box. Needs more tray space. I love the box but it either could use a bigger tray or more than one. The plastic sliding tray that is.
Date published: 2016-11-24
Rated 5 out of 5 by 308sniper from Great for securing more than just tools This box is a good alternative to storing valuable items. Since most gun safes, even top name brand, take 5 minutes or less to get into, why spend $1000 dollars for the same volume of storage. Also since storage is horizontal instead of vertical, it is a more efficient use of this space.
Date published: 2016-11-22
Rated 4 out of 5 by tb409 from Good product but check before store to make sure not damaged Had a dent by leg, bent the leg, unwrapped at job.
Date published: 2016-11-16
Rated 5 out of 5 by RobertR from Well Built A much better unit than the Kobalt version. Well constructed. Has a punch-out for an electrical cord for dehumidifier or heater element if desired. Great weatherstripping and seal around the lid. Full width tray to hold tools or whatever above what is stored below. No weight capacity limit for chest. The other brand does not have these features. I use it for secure storage inside my garage. I wanted a top sliding tray, but Ridgid had metal stops on the side ledges to prevent the tray from sliding during movement. No problem. I inserted some metal spacers on the ledges and then glued an aluminum angle bar on top, so now the tray slides smoothly front to back, so I can access items in the bottom rear without lifting out the tray. The dual padlock recesses offer enhanced security. Easy-open lid. Great product for the money.
Date published: 2016-11-14
Which casters can I buy with this unit? What is the bolt spacing for the casters?
The spacing for the bolt placement on the casters from center of hole to center of hole 3" x 3".
Date published: 2015-07-22
Where can I purchase the pieces that hold the locks in place?
Try your local hardware store or contact RIDGID, they will have them.
Date published: 2015-12-04
Can I get an additional orange flexi shelf for the 2048-OS JOB BOX?
The part number is 7650 but please take note that a 2048-OS cannot accommodate 2 Flexi-Shelf’s as the box is designed that way. Thanks, RIDGID
Date published: 2014-06-03
I assume the listed dimensions (48" x 24" x 28") are the external measurements. What are the internal dimensions of this storage chest?
Thank you for your interest in RIDGID! Please see attached images for your perusal. Regards, RIDGID
Date published: 2016-09-28
What are size of wholes on the skids ? So I can secure my box to a truck bed.
Thank you for your interest in RIDGID. Each skid foot will have 4 square holes that are 7/16" and 2 round holes that are 5/8". Regards, RIDGID
Date published: 2016-03-09