K-1500G Sectional Machine

K-1500G Sectional Machine - OBSOLETE

Features

A gasoline engine makes the Model K-1500G well-suited for cleaning lines in remote locations where electrical power is unavailable. Cuts through roots fast.
Unique, easy-to-use, instant-acting cable clutch maximizes operator control. Pull down on the handle and the cable spins at 600 RPM. Release handle, cable stops instantly.
Comes equipped to use 1 1⁄4" (32 mm) cable to clean 3" (75 mm) to 10" (250 mm) lines through 300' (92 m).
6 HP gasoline engine drives cable via four-speed transmission. Allows the operator to vary the cable spinning speed to fit the application. Forward speeds of 333, 425 and 500 RPM, and a reverse speed of 250 RPM.
Low-profile, four-wheel cart easily rolls to the job. Guards against machine upset and possible fuel spillage.
Includes A-1 RIDGID® drain cleaning mitt and operator’s manual.

Specifications

Machine Dimensions

Width Wheel to Wheel	26" (66 cm).
Length Including Kickstand	28" (71 cm).
Ground to Top of Handle	38" (97 cm).
Back of Handle to Front	49" (124 cm).
Ground to Top of Housing Shell	27" (60 cm).

Support Documents

Brochure

Diagnostics and Drain Cleaning Product Catalog (8 MB)

Parts List

K-1500G Parts List (192.62 KB)

Operator's Manual

K-1500G Sectional Machine Manual (614.01 KB)

Warranty

Full Lifetime Warranty

Ordering Information

Catalog Number	Model No.	Description	Weight
Catalog Number	Model No.	Description	lb.	kg
48462	K-1500G with C-14	K-1500G Machine with Standard Equipment, includes: – Ten Sections Of C-14 Cable, Total 150' (45.7 m) – Three A-8 Cable Carriers – A-1 Left-Hand RIDGID Drain Cleaning Mitt – A-12 Coupling Pin Key – A-34-12 Rear Guide Hose – A-2864 Hex Key – A-3516 Hex Key – A-3 Tool Box – T-2 Heavy-Duty Straight Auger – T-4 Heavy-Duty Funnel Auger – T-6 Retrieving Auger – T-8 Grease Cutter – T-13 Sawtooth Cutter – T-50 Sharktooth Cutter	350	159.0	Buy Now

Tools

Catalog Number	Model No.	Description	Replac. Blade(s)
59480	T-11	“H” Cutter, 2 1⁄2" (65 mm)	97800	Buy Now
59485	T-12	“H” Cutter, 3 1⁄2" (89 mm)	97945	Buy Now
59625	T-21	Spiral Sawtooth Cutter, 2 1⁄2" (65 mm)	97970	Buy Now
59765	T-24	4-Blade Cutter, 21⁄2" (65 mm)	97940	Buy Now
59770	T-25	4-Blade Cutter, 3 1⁄2" (89 mm)	97975	Buy Now
59775	T-26	4-Blade Cutter, 4 1⁄2" (114 mm)	97805	Buy Now
61770	T-15A	Expanding Cutter, 4" - 6" (110-150 mm)	62970	Buy Now
61790	T-4	Heavy-Duty Funnel Auger	-	Buy Now
61800	T-2	Heavy-Duty Straight Auger	-	Buy Now
61825	T-15B	Expanding Cutter, 6" - 8" (150-200 mm)	62980	Buy Now
61850	T-17	Spiral Bar Cutter, 6" (150 mm)	97955	Buy Now
61960	T-16	Spiral Bar Cutter, 4" (110 mm)	97855	Buy Now
61970	T-13	Sawtooth Cutter, 2 1⁄2" (65 mm)	98070	Buy Now
61975	T-14	Sawtooth Cutter, 3 1⁄2" (89 mm)	98075	Buy Now
62840	T-1	Straight Auger	-	Buy Now
62845	T-10	Grease Cutter, 4 1⁄2" (114 mm)	97865	Buy Now
63075	T-22	Spiral Sawtooth Cutter, 3" (75 mm)	97970	Buy Now
63085	T-23	Spiral Sawtooth Cutter, 4" (110 mm)	97850	Buy Now
63105	T-3	Funnel Auger	-	Buy Now
63110	T-31	Chain Knocker, For 3"- 4" Pipe (75-110 mm)	97985	Buy Now
63115	T-32	Chain Knocker, For 6" Pipe (150 mm)	97990	Buy Now
63120	T-33	Chain Knocker, For 8" Pipe (200 mm)	97995	Buy Now
63145	T-38	Flue Brush, 1 1⁄2" (40 mm)	-	Buy Now
63150	T-39	Flue Brush, 2" (50 mm)	-	Buy Now
63160	T-41	Flue Brush, 3" (76 mm)	-	Buy Now
63165	T-42	Flue Brush, 3 1⁄2" (89 mm)	-	Buy Now
63170	T-43	Flue Brush, 4" (110 mm)	-	Buy Now
63190	T-5	A-3565 Key	-	Buy Now
63195	T-6	Funnel Retrieving Auger Run Machine In Reverse	-	Buy Now
63200	T-7	Hook Auger	-	Buy Now
63205	T-8	Grease Cutter, 2 1⁄2" (65 mm)	97920	Buy Now
63210	T-9	Grease Cutter, 3 1⁄2" (89 mm)	97925	Buy Now
63240	T-45	Flue Brush, 5" (127 mm)	-	Buy Now
98030	T-50	Includes 3 Sizes: 3-4-5" (75-110-127 mm)	-	Buy Now
98035	T-50-1	Sharktooth Cutter, 3" (75 mm)	98005	Buy Now
98040	T-50-2	Sharktooth Cutter, 4" (110 mm)	98010	Buy Now
98045	T-50-3	Sharktooth Cutter, 5" (127 mm)	98015	Buy Now

Cables and Leaders

Catalog Number	Model No.	Description	Weight
Catalog Number	Model No.	Description	lb.	kg
25036	C-10 PC	7/8" (22 mm) x 15' Cable with Inner Core (4,6 m)	10	4.50	Buy Now
25046	C-8IC	5/8” (16mm) x 7.5’ (2.3m) Inner Core Cable	3 1/2	1.60	Buy Now
62275	C-10	7/8" (22 m) x 15' (4,6 m) All- Purpose Wind	9 1/2	4.30	Buy Now
62280	C-11	1 1/4" (32 mm) x 15' (4,6 m) Standard All-Purpose Wind. 3⁄8" (10 mm) Pitch. Good for 4" (110 mm) Traps, 3" (75 mm) - 8" (200 mm) Lines	16	7.30	Buy Now
62285	C-12	15' (4,6 m) Extra-Heavy- Duty Wind. 3/8" (10 mm) Pitch. Recommended For 4" (110 mm) - 10" (250 mm) Long Runs, No 4" (110 mm) Traps	19	8.60	Buy Now
62295	C-14	15' (4,6 m) Heavy-Duty Wind. 1/2" (13 mm) Pitch. Recommended For 3" (75 mm) - 10" (250 mm) Lines Through Cleanout, No 4" (110 mm) Traps	16	6.80	Buy Now
62300	C-15	15' (4,6) Extra-Flexible Wind. 1⁄2" (13 mm) Pitch. Recommended For 3" (75 mm) - 6" (150 mm) Lines Good for Traps	12	5.50	Buy Now
63090	T-27	1 1⁄4" (32 mm) x 25" (63,5 cm) Leader	2 3/4	1.20	Buy Now

Accessories

Click on a Catalog Number link to view its Standard Equipment.

Catalog Number	Model No.	Description	Weight
Catalog Number	Model No.	Description	lb.	kg
59205	A-1	Left-Hand RIDGID Drain Cleaning Mitt	1/2	0.20	Buy Now
59225	A-12	1/2" Cable Pin Key	1/2	0.20	Buy Now
59240	A-17	Manhole Guide Pipe	23	10.40	Buy Now
59295	A-2	Right-Hand RIDGID Drain Cleaning Mitt	1/2	0.20	Buy Now
59320	A-369X	Jaw Assembly 1-1/4" Cable	3/4	0.30	Buy Now
59360	A-3	Tool Box	5	2.30	Buy Now
59395	A-34-12	12-Foot (3,7 m) Rear Guide Hose	20	9.10	Buy Now
59400	A-34-15	15-Foot (4,9 m) Rear Guide Hose	20 3/4	9.40	Buy Now
59415	A-34-10	10-Foot (3,1 m) Rear Guide Hose	13 3/8	6.20	Buy Now
59440	A-4	Trap Spoon (30", 76 cm)	1 3/4	0.80	Buy Now
59470	A-8	Cable Carrier 60' (18 m) Capacity 1 1/4" (32 mm)	5 1/2	2.50	Buy Now
59475	A-9	Cable Carrier 150-Foot (45,7) Capacity 11⁄4" (32 mm)	14	6.40	Buy Now
61708		Sectional Cable Carrier	33	15.00	Buy Now
Standard Equipment Complete carrier stand including plastic drum
61713		Sectional Cable Drum	15	6.80	Buy Now
Standard Equipment Plastic drum with support disk and drain plug
61718		Trident Cable Decoupler	3/4	0.30	Buy Now