What size hammer flare tools do you have?

Hi, the link below will assist you with sizes and part numbers. https://www.ridgid.com/us/en/hammer-type-flaring-tools?utm_campaign=bazaarvoice&utm_medium=Default&utm_source=AskAndAnswer&utm_content=Default

I recently heard there are different flaring tools for K & L copper tubing Is this correct? Also, I should not use a regular steel hammer, it should be brass. I'm referring to 1/2 I.D. 5/8 O.D. & 3/4 I.D. 7/8 O.D. CTS. Thank you, Chris

Flaring tools are made for all types of copper, K, L or M. Preferably, the tube should be of the soft variety rather than hard drawn. Hard drawn copper can be flared but the end should be annealed prior to making the flare. The hammer type flares do not require a brass hammer. A traditional head is acceptable.

flaring tool does not work

Thank you for choosing RIDGID. Please contact our Technical Services department directly at 888-519-3456. We do not have a 40mm or 32mm Hammer-Type Flaring Tools, and we would like to work with you to help identify what tools you have and what they will work with.