K-1500 Sectional Machine
2" to 8" (50 mm to 200 mm) Drain and Sewer Lines
Read More
{{noResults}}
{{$index + 1}}.
{{wtbVendor.Name}}
{{wtbVendor.Distance}}
Directions: To Here - From Here
Call for Availability
{{wtbVendor.Distance}}
Directions: To Here - From Here
Call for Availability
{{wtbVendor.AddressLine1}}
{{wtbVendor.AddressLine2}}
{{wtbVendor.CityStatePostalCode}}
{{wtbVendor.CountryName}}
Tel: {{wtbVendor.Phone}}
{{wtbVendor.Website}}
{{wtbVendor.AddressLine2}}
{{wtbVendor.CityStatePostalCode}}
{{wtbVendor.CountryName}}
Tel: {{wtbVendor.Phone}}
{{wtbVendor.Website}}
({{resultCount}} results)
Features
- The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster and better.
- Wheels to the job site – sets up fast, cleans up fast.
- Low-profile “B” frame design will fit most crawl spaces. Loads and unloads from truck easily. Upright “A” frame features cable carrier storage during transport, ideal for in-house applications.
- Equipped to run, easy to handle, 15’ (4.6 m) sections of 1 1/4" (32 mm) cable to clean 3" to 8" (76.2 m to 200 mm) lines to 200’ (61 m).
- Easy clutch jaw change-out adapts K-1500 to run 15’ (4.6) sections of 7/8" (22 mm) cable through 2" to 4" (50 to 100 mm) lines up to 175’ (53 m).
- Equipped with 3/4 HP motor. CSA approved. Approved to UL standards (NRTLC).
Support Documents
Operator's Manual
Parts List
K-75A/B, K-1500A/B and K-1500SP Parts List
(589.72 KB)
Warranty
Ordering Information
Machine Options - A Frame
| Catalog Number | Model No. | Description | Voltage (V) | Weight | |
|---|---|---|---|---|---|
| lb. | kg | ||||
| 27592 | K-1500A | Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 1 1/4" (32 mm) (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set * | 220 | 256 | 116.10 |
| 27612 | K-1500A | Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose | 220 | 135 | 61.30 |
"A-369-X 1 1/4" Jaw Set
Machine Options -B Frame
| Catalog Number | Model No. | Description | Voltage (V) | Weight | |
|---|---|---|---|---|---|
| lb. | kg | ||||
| 27617 | K-1500B | Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose | 220 | 135 | 61.3 |
| 27637 | K-1500B | Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (32 mm) (C-11) Cable, Total 105' (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set | 220 | 256 | 116.1 |
| 33922 | K-1500B Special Kit | Machine with A-1 Mitt, A-12 Pin Key, A-34-12 Rear Guide Hose, four Sections 11/4" (32mm) (C11) Cable, Total 60' (18m), one A-8 Cable Carrier, T-3 funnel auger, T-50-1 shark tooth cutter and hex key. | 220 | 210 | 95.0 |
Cables and Leaders
| Catalog Number | Model No. | Description | Weight | |
|---|---|---|---|---|
| lb. | kg | |||
| 24226 | C-11 PC | 15' (4,6 m) Standard All- Purpose Wind 3/8" Pitch with Plastic Core, Good For 4" Traps | 17 3/5 | 8.0 |
| 62275 | C-10 | 7/8" (22 m) x 15' (4,6 m) All- Purpose Wind Requires A-368-X Jawset | 9 1/2 | 4.3 |
| 62280 | C-11 | 1 1/4" (32 mm) x 15' (4,6 m) Standard All-Purpose Wind. 3⁄8" (10 mm) Pitch. Good for 4" (110 mm) Traps, 3" (75 mm) - 8" (200 mm) Lines | 16 | 7.3 |
| 62285 | C-12 | 15' (4,6 m) Extra-Heavy- Duty Wind. 3/8" (10 mm) Pitch. Recommended For 4" (110 mm) - 10" (250 mm) Long Runs, No 4" (110 mm) Traps | 19 | 8.6 |
| 62295 | C-14 | 15' (4,6) Heavy-Duty Wind. 1/2" (13 mm) Pitch. Recommended For 3" (75 mm) - 10" (250 mm) Lines Through Cleanout, No 4" (110 mm) Traps | 16 | 6.8 |
| 62300 | C-15 | 15' (4,6) Extra-Flexible Wind. 1⁄2" (13 mm) Pitch. Recommended For 3" (75 mm) - 6" (150 mm) Lines Good for Traps | 12 | 5.5 |
| 63090 | T-27 | 1 1⁄4" (32 mm) x 25" (63,5 cm) Leader | 2 3/4 | 1.2 |
Cable Kits
| Catalog Number | Model No. | Description | Weight | |
|---|---|---|---|---|
| lb. | kg | |||
| 61625 | A-61 | Standard Equipment Cable Kit for K-60-SE, includes: – Five Sections C-10, 7⁄8" (22 mm) x 15' (4,6 m) Cable – A-8 Cable Carrier | 43 | 19.50 |
| 61630 | A-62 |
Standard Equipment Tool Kit for K-60-SE, includes: –T-101 Straight Auger –T-102 Funnel Auger –T-107 Spade Cutter –T-125 Retrirving Auger –T-150-1 Sharktooth Cutter –A-3 Tool Box –A-12 Pin Key |
8 | 3.60 |
Accessories
| Catalog Number | Model No. | Description | Weight | |
|---|---|---|---|---|
| lb. | kg | |||
| 59295 | A-2 | Right-Hand RIDGID Drain Cleaning Mitt | 1/2 | 0.2 |
| 59225 | A-12 | 1/2" Cable Pin Key | 1/2 | 0.2 |
| 59240 | A-17 | Manhole Guide Pipe | 23 | 10.4 |
| 59300 | A-20 | 8-Foot (2,4 m) Front Guide Hose Assembly | 25 | 11.4 |
| 59320 | A-369X | Jaw Assembly 1-1/4" Cable | 3/4 | 0.3 |
| 59325 | A-368X | Jaw Assembly 7/8" Cable | 3/4 | 0.3 |
| 59360 | A-3 | Tool Box | 5 | 2.3 |
| 59395 | A-34-12 | 12-Foot (3,7 m) Rear Guide Hose | 20 | 9.1 |
| 59415 | A-34-10 | 10-Foot (3,1 m) Rear Guide Hose | 13 3/8 | 6.2 |
| 59440 | A-4 | Trap Spoon (30", 76 cm) | 1 3/4 | 0.8 |
| 59470 | A-8 | Cable Carrier 60' (18 m) Capacity 1 1/4" (32 mm) | 5 1/2 | 2.5 |
| 62467 | A-1HD | Heavy-Duty Left-Hand RIDGID Drain Cleaning Mitt | 1/2 | 0.2 |
| 62472 | A-2HD | Heavy-Duty Right-Hand RIDGID Drain Cleaning Mitt | 1/2 | 0.2 |
Tools
| Catalog Number | Model No. | Description | Replac. Blade(s) |
|---|---|---|---|
| 59480 | T-11 | “H” Cutter, 2 1⁄2" (65 mm) | 97800 |
| 59485 | T-12 | “H” Cutter, 3 1⁄2" (89 mm) | 97945 |
| 61770 | T-15A | Expanding Cutter, 4" - 6" (110-150 mm) | 62970 |
| 61790 | T-4 | Heavy-Duty Funnel Auger | - |
| 61800 | T-2 | Heavy-Duty Straight Auger | - |
| 61825 | T-15B | Expanding Cutter, 6" - 8" (150-200 mm) | 62980 |
| 61970 | T-13 | Sawtooth Cutter, 2 1⁄2" (65 mm) | 98070 |
| 61975 | T-14 | Sawtooth Cutter, 3 1⁄2" (89 mm) | 98075 |
| 62840 | T-1 | Straight Auger | - |
| 62845 | T-10 | Grease Cutter, 4 1⁄2" (114 mm) | 97865 |
| 63105 | T-3 | Funnel Auger | - |
| 63190 | T-5 | A-3565 Key | - |
| 63195 | T-6 | Funnel Retrieving Auger Run Machine In Reverse | - |
| 63200 | T-7 | Hook Auger | - |
| 63205 | T-8 | Grease Cutter, 2 1⁄2" (65 mm) | 97920 |
| 63210 | T-9 | Grease Cutter, 3 1⁄2" (89 mm) | 97925 |
| 59625 | T-21 | Spiral Sawtooth Cutter, 2 1⁄2" (65 mm) | 97970 |
| 59765 | T-24 | 4-Blade Cutter, 21⁄2" (65 mm) | 97940 |
| 59770 | T-25 | 4-Blade Cutter, 3 1⁄2" (89 mm) | 97975 |
| 59775 | T-26 | 4-Blade Cutter, 4 1⁄2" (114 mm) | 97805 |
| 59780 | T-26A | 4-Blade Cutter, 5 1⁄2" (140 mm) | 97980 |
| 61850 | T-17 | Spiral Bar Cutter, 6" (150 mm) | 97955 |
| 61855 | T-18 | Spiral Bar Cutter, 8" (200 mm) | 97960 |
| 61960 | T-16 | Spiral Bar Cutter, 4" (110 mm) | 97855 |
| 63075 | T-22 | Spiral Sawtooth Cutter, 3" (75 mm) | 97970 |
| 63085 | T-23 | Spiral Sawtooth Cutter, 4" (110 mm) | 97850 |
| 63110 | T-31 | Chain Knocker, For 3"- 4" Pipe (75-110 mm) | 97985 |
| 63115 | T-32 | Chain Knocker, For 6" Pipe (150 mm) | 97990 |
| 63120 | T-33 | Chain Knocker, For 8" Pipe (200 mm) | 97995 |
| 63145 | T-38 | Flue Brush, 1 1⁄2" (40 mm) | - |
| 63150 | T-39 | Flue Brush, 2" (50 mm) | - |
| 63155 | T-40 | Flue Brush, 2 1⁄2" (65 mm) | - |
| 63160 | T-41 | Flue Brush, 3" (76 mm) | - |
| 63165 | T-42 | Flue Brush, 3 1⁄2" (89 mm) | - |
| 63170 | T-43 | Flue Brush, 4" (110 mm) | - |
| 63175 | T-44 | Flue Brush, 4 1⁄2" (114 mm) | - |
| 63180 | T-46 | Flue Brush, 5 1⁄2" (140 mm) | - |
| 63185 | T-47 | Flue Brush, 6" | - |
| 63240 | T-45 | Flue Brush, 5" (127 mm) | - |
| 98030 | T-50 | Includes 3 Sizes: 3-4-5" (75-110-127 mm) | - |
| 98035 | T-50-1 | Sharktooth Cutter, 3" (75 mm) | 98005 |
| 98040 | T-50-2 | Sharktooth Cutter, 4" (110 mm) | 98010 |
| 98045 | T-50-3 | Sharktooth Cutter, 5" (127 mm) | 98015 |
K-1500 Sectional Machine is rated
out of
5 by
10.
Rated 5 out of
5
by
incognito06 from
This product is easy to use and can teach to our employee easily.
It is efficient and manageable for declogging in sites.
Date published: 2018-01-18
Rated 5 out of
5
by
Econodrain from
Great tool
Actually just used it on a root job. This machine made easy work of a tough job, first pass punching through the blockage and tearing out roots, after changing cutter passed again. Camera showed what a excellent job it did. I always rely on RIDGID for my drain equipment and it never lets me down. Tough long lasting machines. Thanks RIDGID
Date published: 2017-06-23
Rated 5 out of
5
by
victor150 from
This machine is a work horse
I have been using a K-1500B frame for 21 years and recently purchased a K1500A frame for the ease of transport feature for a cable carrier, we have been using it for a couple months now and each have their best usage scenario but we are an even split between the two machines now. If this machine holds up like the B frame we have then I have no doubt it will pay for itself many times over like the last machine.
Date published: 2017-05-03
Rated 5 out of
5
by
1carterstbuffalo from
easy use
use every day great machine, one man opp , easy loading in and out truck
Date published: 2016-02-10
Rated 5 out of
5
by
sallbright from
This thing is a beast
Talk about a tool that just works! This thing is a beast and works like a charm. We own rental properties and being able to effectively handle our own rod outs has been quite a savings and better service for our tenants. Highly recommend this equipment!
Green Day Construction, Scott Allbright
Date published: 2016-01-17
Rated 5 out of
5
by
glenswork from
Great working features
I would only have a sectional machine real easy to use.
Date published: 2014-12-19
Rated 5 out of
5
by
rahargraves from
Prefect Machine for those rough stoppages
I had a 4" drain fully obstructed. I ran the first length with the cutter head and it went through like butter.
Date published: 2014-11-28
Rated 5 out of
5
by
solveitplumbing from
Good solid machine for cleaning drains
As a maintenance plumber in australia we carry this machine on board every day cleaning drains is a large part of our work and we rely heavly on have a machine that can with stand the abuse we throw at it
i have tried other brands and buy far the k1500 is the best for the job
it is light weight and easy to move around propertys and still has the power to clear the larger blockages that other machines struggle with
Date published: 2014-11-25