Explore Emerson
Select a Country
  • {{country.Text}}
Select a Language
Select a Country
  • {{country.Text}}
Select a Language
Toggle navigation

Features

  • Cleans drain lines from ½" up to 1½" in diameter.
  • Cable is positively retained in the drum to prevent cable pullout.
  • AUTOFEED® Trigger Technology allows cable to self-feed down the drain.
  • Lightweight polyethylene drum will not dent or rust.
  • Pull the trigger and turn the drum for a clean drain without the mess.

Specifications

Drain Size Cleans drain lines from up ½" to 1½" in diameter.
Cable 25' of 1/4" MAXCORE cable.
Weight 3.6 lbs

Ordering Information

Ordering Information
{{model}}
Catalog Number Description Weight
lb. kg
57038 KWIK-SPIN+  3.60  1.63 
KWIK-SPIN+ Hand Spinner with AUTOFEED® is rated 2.2 out of 5 by 10.
  • y_2018, m_12, d_12, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en, sid_1389, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getAggregateRating, 67ms
  • REVIEWS, PRODUCT
Rated 1 out of 5 by from Cable kinked 2 hours after purchase I purchased this tool versus alternatives at Home Depot because of the Ridgid name and warranty. Two hours after the purchase the cable has a permanent kink. I should have bought one of the alternatives that were available. My bad for trusting Ridgid.
Date published: 2018-11-27
Rated 5 out of 5 by from Happy Thanksgiving clogged sink! Yep, it happened. I dumped my 2 gallons of salted turkey brine down the kitchen sink and it clogged up. I'm not sure if the heavy salt concentration loosened up some gunk to cause the clog or if it was just "my turn" but it was a pesky bugger. I'm an average homeowner and I'm writing because I see a lot of negative reviews which I think are unfair. It's true the instructions are printed on the back side of the wrapper plastic which is very hard to read but they are also available online along with several videos. RTFM, watch some videos, and don't expect it to be a super-simple process. It might take some give and take and a few tries. Play with it a little before putting it in the pipe so you understand how it works. For example, when pulling the trigger it feeds in very slowly. I successfully cleared a pesky clog that was 8 feet into my kitchen sink drain pipe and behind several 90 degree turns in my 1 1/2 PVC pipe. I pushed manually until I hit resistance and then pulled the trigger and spun the wheel and was easily past the corners where I pushed manually again. I'm a rookie at this and I thought it would be as simple as just snaking around the corners and pushing the clog out or breaking the clog up. What I think happened several times is that the tip worked past the clog, maybe on the side of the pipe, because a few times I extended to the full 25 feet and still found the pipe to be clogged after I removed the snake. At 25 feet from my sink I am into my large 4" main sewer line in the house (I can see in the crawlspace) and I know that wasn't clogged because the only thing not draining was the kitchen sink). I found success after "listening" closely to the resistance provided by the snake and rotating a lot both forward and backward when I felt the clog. Took me 5-6 times in and fully out to clear the clog. My sink drain is of a design where it is impossible for me to pass the head of this device through the drain. I had to go under the sink and take apart some of the PVC piping to get it in. This made the job a bit harder. I did see others at the store with smaller head but to be fair, I think the bigger head would be better at clearing clogs. One improvement I could suggest is to put some kind of banding or color coding on the snake so that you can see the progress. I had some success making a mark with a Sharpie. Even better if they could put banding on to indicate many feet or meters have been input to the pipe. It seems like a good build, is relatively easy to use, and is perfect, I'd say, for any homeowner. Just note this is not intended for toilets, I think mainly because it could scratch them but there may be other reasons so be careful how you use. To me the trigger and the auto-feed was a critical element to make it very easy to get around 90 degree turns in the pipe. Just make sure to get the tool close to the point where you have entered the pipe with little/no slack, pull the trigger, and turn the wheel. With practice you can feel it go around the corner. Good luck
Date published: 2018-11-23
Rated 1 out of 5 by from IN A WORD, GARBAGE!!! DO NOT PURCHASE!!! I rated this item one-star because zero was not an option! The instructions, written on the inside of the plastic wrapper, are worthless! Had to use the internet just to determine how to operate. After one unsuccessful use, the product will not retract. RIDGID should be embarrassed to put its name on such garbage! Never again will I purchase a RIDGID product! What a waste of time!
Date published: 2018-08-29
Rated 5 out of 5 by from Worked as described I read the instructions and it will perfectly the 1st time. It took 5 min to get about 4 ft of cable into my shower drain
Date published: 2018-08-23
Rated 2 out of 5 by from Won't rewind I was able to clear out two bathroom drains, but after the second the auger would not retract no matter how much I turned the crank.
Date published: 2018-06-28
Rated 1 out of 5 by from Won’t retract Used it once, had to clear clog by pulling the cable by hand. Reinsert, twist and pull the cable by hand about 5 times and it worked. Coiled the cable in a bucket and headed back to HD to return a junk tool
Date published: 2018-06-11
Rated 4 out of 5 by from Works pretty Well The product works pretty well. You just have to realize that advancing and retracting the cord is a very slow process because it is using the treads on the cord which are very close together.
Date published: 2018-04-22
Rated 1 out of 5 by from I should have read the reviews Just like others stated (I should have read them before buying) this device does not work well at all. It is extremely difficult to tell if the button is engaged and when spinning the handle you cannot tell if it is moving or not. It never got fully extended and would not retract. Had to hand pull the extension out of drain and it was clean, never reached a blockage, ended up calling a plumber....Waste of money...Also, even though I created an account, with my username and email address it still requires me to choose a nickname and input an email address to write a review? I'm logged in!!!!!
Date published: 2018-01-31
  • y_2018, m_12, d_12, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en, sid_1389, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getReviews, 1ms
  • REVIEWS, PRODUCT

cable has become detached from the drum & there's nothing inside the drum to attach it to...

Old product...no AUTOFEED
Asked by: Shaoolie
  • y_2018, m_12, d_12, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en, sid_1389, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_ridgid
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getContent, 63ms
  • QUESTIONS, PRODUCT
Contact Us
Have comments or questions? We'd love to hear from you.
Product Registration
RIDGID Tools are backed by the best coverage in the industry.
RIDGID Forum
Join the community and talk with other pros today.