Search - All Results
New generation ultra compact 32 kN press tool, nearly at the size and weight of a compact tool. High performance Lithium battery, 200 cycles of pressing after a single charging. Automatically return to the start position after complete pressing. The LED Screen will blink to indicate issues such as improper temperature, low battery, or maintenance required.
Shovels Share RIDGID shovel blades and shanks are one-piece, rustproof 14-gauge steel, taper-formed and then heat treated. Round blades have a slip-resistant, turned step. Burnished, lacquered ash handles are double-riveted to blade socket. Warranty Full Lifetime Warranty
No. 575 EMT Sizing Tool for Conduit Share Quickly resizes thin-wall conduit ends that have become deformed after installation. Tool can also be used for slight bending of 1/2" and 3/4" conduit ends for alignment purposes. Hardened alloy steel resists wear. Warranty Full Lifetime Warranty
Twist Drills Full Lifetime Warranty Customers Also Viewed Ordering Information Catalog Number Model No. Overall Length DRILL, #1 HS 1/8 DRILL, #2 HS 3/16 DRILL, #3 HS 1/4 DRILL, #4 HS 5/16 DRILL, #5 HS 11/32 DRILL, #6 HS 7/16 DRILL, #7 HS 1/2
Professional quality tools, precision crafted for ultimate balance, high strength and exacting performance. Forged and heat-treated for extended life and durability. Slip Joint and Tongue and Groove pliers feature a flush rivet design that provides a stronger tool and allows access to tighter areas. Cushioned grips are designed for comfort only. They are NOT intended as insulation against electric shock.
RIDGID® Fiberglass Folding Rules is precision made of flexible heavy-duty fiberglass with embedded, easy-to-read boldface figures and graduations with red 16" stud marks and positive locking joints. Model 1602 is graduated on one side in millimeters with red markings every 10 cm. Reverse side reads in inches.
Share Hardened alloy steel jaws are designed and manufactured to ensure the longest possible blade life. One-step internal cam mechanism provides the quickest and simplest way to keep the cutting blades precisely aligned. Handles and grips designed to allow greater mechanical advantage for crisp, controlled cutting. Parts List Bolt Cutters Parts List (111.17 KB)
The display shows the exact measurements currently being reported by the sensors and it supports overlaying leveling information on top of the camera. The application also allows you to calibrate both the vertical and horizontal vials for phones with buttons on the side or cameras on the rear which can interfere with your readings.
Bushings for 9 popular cable sizes from 1/0 AWG through 1,780,000 C.M. available from stock. The operation of the tool is similar to that of a conventional tubing cutter. The bushing holder, cutter and handy carrying case are sold as one unit. Case contains storage sockets for 11 bushings. Twelfth bushing is stored in holder.
The compact design quickly mounts to pipe 4” and up with a maximum wall thickness of 1/2”, and creates consistent bevels in a single pass. Accurately bevel pipes in as little as 45 seconds without flames or sparks. Accurate bevel angle around diameter of the pipe allows for optimal number of cover passes.
The Press Snap™ Soil Pipe Cutter expands the capabilities of RIDGID® standard press tools by providing a fast and easy way to cut cast iron soil pipe. Without lengthy lever arms used by traditional soil pipe cutters, improved access is a snap. Simply connect the Press Snap cutter to a RIDGID press tool, wrap the chain around the pipe, and press. Eliminates the need to score the pipe.
Accessories for No. 124 Copper Cleaning Machine Cleaning Brushes: 13 Internal, Standard-duty wire for 1/2" - 4" fittings External Cleaning Brush and Deburring Cutter: For 1/2" - 2" fittings and 1/2" - 4" tube Reamer: Replaceable blade for 1/2" - 2" tube Accessories: No. 126 Facing Cutter - Replaceable hardened steel insert
One Stop Wrench Share The RIDGID One Stop Wrench provides the exact size wrench you need to install angle stops and compression couplings. The One Stop Wrench is two wrenches in one. Open end sizes: 9⁄16" & 15⁄16".
Depending on pipe size, pipe material and blockage, there are different chain Knockers and Brushes for every job. Chain Knockers With Carbide Tip - Chain Knockers with carbide tips clean wall to wall and are ideal for removing scale and light roots as well other grease and soft blockages in hard walled pipe types.
Heavy-Wall Conduit Benders Share Designed for the larger sizes of heavy-wall conduit. This bender has hardened teeth for slip-resistant grip. Extra-long supporting socket minimizes handle breakage. Notch in radius protects conduit threads. Handles not included. Warranty
With a capacity range of 2"-24" diameter pipe, the 920 has the largest capacity of any RIDGID roll groover. Transportation Mode – Detachable wheels enable one man to easily move the 920 around a jobsite. Built-in Pressure Gauge – Helps operator monitor hydraulic pressure to control flare and optimize groove time.
SeekTech ST-305 Line Transmitter The RIDGID 5 Watt SeekTech ST-305 Line Transmitter lets you energize metallic lines for tracing and can transmit two frequencies simultaneously. Audio feedback confirms a good circuit before beginning a trace. Lightweight and compact transmitter that delivers up to 5 watts of power. Can transmit two frequencies simultaneously.
Share Designed for work in areas where a complete turn is impossible. Model 42-A has a short handle for use in confined areas. Second handle on Model 44-S makes two-man leverage possible for large pipe sizes. Both models are equipped with four heavy-duty wheels. Operator's Manual
Wide-Roll Pipe Cutter Share Featuring extra-wide rolls, this cutter is especially designed for use with power drives. The wide rolls provide for true tracking and cleaner cuts. Operator's Manual Proper Use Of Pipe Cutters (2.34 MB)
Feed screw quickly adjusts sizes and keeps pipe centered on stand. RIDGID's Adjustable Stand with Steel Rollers is ideal for use with threading machines, roll grooving or other pipe working applications. Rollers can be locked to prohibit rotation. Ideal for use with threading machines, roll grooving or other pipe working applications.
RIDGID's high quality Reciprocating Saw Blades are perfect for every application. Available in carbon, or bi metal consisting of a high-speed steel cutting edge welded to a flexible alloy steel back for wood or metal cutting. RIDGID® blades will fit in all reciprocating saws and are packed in plastic sleeves with five blades or 50 blades.
RIDGID® heavy-duty tape measures feature an innovative design incorporating a heavy duty rubber bumper and stainless plate cover for superior durability to withstand even the toughest jobsite conditions. Stainless steel case with full surround anti-slip rubber offers more durability and comfort while easily resisting impacts. Tape measures with rubber grip and stainless bodies tape available in 16' and 25' lengths.
RIDGID's Traditional PEX Crimp Tools are available from 1/2" to 1" and are ideal for making PEX tubing connections in potable water and radiant heating applications. RIDGID Traditional PEX Crimp Tools are available from 1/2" to 1" and are ideal for making PEX tubing connections in potable water and radiant heating applications. With handle openings up to 71% smaller than traditional PEX crimp tools, you can maneuver into tight spaces with ease.
K-6200 Drum Machine - Obsolete K-6200 Drum Machine - Obsolete The K-6200 has been discontinued and we are no longer producing this machine. Service parts and accessories are still available. If you are looking for a new machine, try the K-4310 FXP Drum Machine (Cat # 73073). Motor
The RIDGID Model KJ-5000 portable water jetter gives you 5075 psi actual working pressure to handle commercial and industrial pipe clearing applications. As you pull the hose back, it power scrubs the line flushing debris away and restoring drain lines to their full, free-flowing capacity - all without the use of harmful chemicals.