Search - All Results
These imPRESSive tools are suitable for various applications while offering adaptability to every job. RP 350 delivers 10-20% more presses per charge with zero scheduled maintenance, while RP 251 allows one-handed use to help you easily work overhead and in tight spaces. RP 352-XL is the lightest and fastest pistol grip XL Press Tool, allowing users to press XL-size M-fittings in a single cycle, without requiring a second pressing and actuator.
This pipe cutter is designed to cut, clean, ream and deburr copper and stainless steel tubing and fittings quickly and professionally. and possessing a conveniently located carrying handle, the Model 122XL is ideal for transport directly to the job site. Rugged cast aluminum housing and powerful 1/3 HP induction motor assures a long life.
Internal Tubing Cutters are for trimming tubing below floor level for shower/floor drain installations, or above the ceiling for sprinkler head installations. Model 106 features a tool steel and aluminum body while 108 and 109P have cast iron bodies. Each model features hardened steel rollers and cutter wheels. Model 109P is equipped to cut PVC or ABS plastic.
Two sets of split-floating guide wheels*, located on the top and along the sides of the cutter wheel, ride in the corrugations to provide stable tracking, resulting in a high quality cut. The floating guide rollers also serve to hold the two pieces of pipe together to ensure a complete and clean cut. Ergonomic knob provides a firmer grip to cut through tubing quickly.
Models 151-156 feature a quick-acting design, I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation. X-CEL Wheel Pin changes your cutter wheel quickly using a new ball detent design... no tool needed... no lost clips! Available in models for plastic pipe or metallic tubing. Models 151 and 152 feature fold-away reamers. Model 151-ML is suitable for cutting multilayer tubing.
Rugged cast aluminum housing and powerful 1/3 HP induction motor assure long life. Cutting handle adjusts to accommodate different tubing sizes. Large carrying handle for easy transport to the job site. Guide rollers ensure a straight cut with no tracking. Copper cutter wheel tested to over 10,000 cuts.
With its rugged and compact design, the handle can be attached to the cutter and operated in ratchet steps as small as 10 degrees. Featuring the 2-in-1 Close Quarters Cutter where the cutter can be used alone or with the ratchet handle, a light and ergonomic accessory to help use the cutter in tight and restricted spaces.
Share RIDGID's Close Quarter Tubing Cutters are specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing. Rollers include grooves for close-to-flare cuts on models 101, 101J and 118. The Model 118 features a special knob for easier tightening of the feedscrew.
Flares steel, stainless steel, hard copper and brass tubing - through a wall thickness of 0.035" (0.9 mm). Easy to Use - Ratcheting handle reduces effort required especially in confined areas Durable - Eccentrically mounting, hardened steel flaring cone Smooth Flares - Handle clutch releases when flare is complete to iron and smooth flare
Recommended for aluminum and soft copper. - Also, flares steel, stainless steel, hard copper and brass. This precision tool provides smooth, uniform flares with minimum effort Hardened steel flaring cone, eccentrically mounted in needle bearings, produces rolling action for even metal flow. Gives uniform flare walls without galling. Special ironing features ensures a smooth flare.
Ratchet Cutters with Ergonomic Grips Share Ergonomic grips on bottom handle are spaced at 1⁄2" increments to act as a quick pipe measuring scale. X-CEL® quick-change blade. “Burr-less" cutting operation provides a square cut.
High-geared mechanical ratios bend heavy-wall steel tube (up to 1/8" wall thickness), stainless steel tube (up to 3/32" wall thickness) and hard copper water tube (types K and L). Benders produce uniform bends up to 180° with no need to anneal tubing or use special temper grade tubing. Reduce bending effort to a minimum. Inch and metric sizes.
Share Model 345 is a precision designed tool for producing 45° flares in soft copper, brass, aluminum and mild steel tubing. A hardened, smooth cone provides fast, 45° flares either single or double lap. A single clamp screw allows easy clamping and removal of tubing. Parts List 345 Manual Flare Tool Parts List (83.04 KB)
One Stop Wrench Share The RIDGID One Stop Wrench provides the exact size wrench you need to install angle stops and compression couplings. The One Stop Wrench is two wrenches in one. Open end sizes: 9⁄16" & 15⁄16".
High quality bending performance for stainless steel and other hard tubing such as steel and titanium. Two-stage design allows for in-place bending from 90 ̊ to 180 ̊ without ever crossing handles. Extra long 16" (40 cm) handles increase leverage and roll dies in the bending form reduce force needed.
Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06" (1.5 mm) to a maximum of 180°. Offset cushion grip handles for comfort when forming 180° bends. A 90° start angle and unique oil-absorbing shoe minimize bending effort while forming accurate bends.
RIDGID Basin Wrenches provide fast, one-handed ratcheting that fits into tight spaces like under a sink. Tension plug holds head in any position up to 90° angle. Spring-loaded jaws of forged alloy steel provide fast, one-hand ratcheting. Telescopic shanks on Models 1017 and 1019 quickly adjust for lengths from 10" to 17".
The Internal Wrench is able to grip onto 1”-2” pipes in situations where you cannot access the outer surface. It can hold closet spuds and bath, basin and sink strainers through 2”. It can be used to install or extract Schedule 40 nipples. The jaws expand by eccentric action and are reversible for various sizes.
Heavy-Duty End Pipe Wrenches Share End Pipe Wrenches provide a faster, easier way to grip pipe in tight spaces. An ideal wrench for pipe work close to a wall, in tight quarters or in closely spaced parallel lines. Parts List End Pipe Wrench Parts List (105.79 KB)
Handles all 1½" (40 mm) to 8" (200 mm) gasketed soil pipe without extra, loose attachments. Easy assembly of Y, tee and elbow fittings, as well as straight lengths from any angle. Slim, compact design lets one man assemble even large sizes quickly and easily. Removal of handle facilitates vertical and overhead pipe assembly.
The 238-P is designed to cut up to 8" soil pipe when driven by an impact driver or 4" with the included ratchet. Lightweight - At 13.5 pounds mounting the tool in difficult places is easy. Clean Cut - Two directional operation allows scoring of the pipe for a clean cut. Durable - Patent pending torque limiter helps protect the tool from overloading.
The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe. Easily cuts by displacing instead of removing pipe material. Great for cutting pipe for groove joining.
Model 2-S Spiral Ratchet Reamer – Self-feeding spiral design for extra-fast and easy hand reaming. Model 2-S Reamer is not suitable for power reaming. Models 2 and 3 Ratchet Reamers – Long taper design will not dig in. Suitable for use with power drives. Hardened alloy steel cone removable for sharpening.
The RIDGID V Head Pipe Stand is designed to support pipe for a variety of uses on the jobsite. Locking ring allows for quick vertical height adjustments. The legs fold on the VF-99 Folding Pipe Stand (Cat No 22168) making it easy to transport and require 70% less area to store!
Roller Head Pipe Stands Share Rollers center pipe and allow rotation. Locking ring allows for quick vertical height adjustments. Roller Head Pipe Stands are ideal for use with threading machines, roll grooving, or other pipe working applications. Locking ring allows for quick vertical height adjustments. Instruction Sheet Pipe Stand Use Guide (1.38 MB)