Features

  • The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
  • An induction motor helps minimize noise.
  • A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.
  • 1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads.
  • Constant and proper lubrication of dies and workpiece with through-head oiling.

Specifications

Nominal Pipe Capacity 1/4"-2" (6mm-100mm) @ 36 RPM, 2-1/2"-4" (65mm-100mm) @ 12 RPM, 4"-6" (100mm-150mm) with 161 Geared Threader.
Bolt Capacity 1/4"-2" (6mm-50mm).
Motor Control Reverse/Off/Forward, heavy-duty rotary-type and integral foot switch.
Gear Box Two-speed gear box 3:1 ratio.
Chuck Hammer-type with replaceable rocker-action jaw inserts.
Rear Centering Device Cam action.
Oiling Pump Self-priming, gerotor-type, automatic-reversing, constant-fl ow.
Oiling Through die head

Ordering Information

      
Catalog Number Model No. Description Die Head RPM Voltage (V) Frequency (Hz) Phase Motor Type Amp Draw (A) Power Weight
lb. kg
26092 1224  1/2" - 4" NPT Hammer Chuck Machine  711/714  36/12  120  50 - 60  Induction  15  1 1/2 HP  509.0  231.0  Buy Now
26097 1224  1/2" - 4" NPT Hammer Chuck Machine  711/714  36/12  230  50 - 60  Induction  1 1/2 HP  509.0  231.0  Buy Now
26127 1224  1/2" - 4" BSPT Hammer Chuck Machine  911/914  36/12  120  50 - 60  Induction  15  1 1/2 HP  509.0  231.0  Buy Now
26112 1224  1/2" - 4" BSPT Hammer Chuck Machine  911/914  36/12  115  50 - 60  Induction  15  1700 W  463.0  210.0  Buy Now
26122 1224  1/2" - 4" BSPT Hammer Chuck Machine  911/914  36/12  230  50 - 60  Induction  1700 W  509.0  231.0  Buy Now
31442 1224  1/2" - 4" NPT Hammer Chuck Machine  711/714  36/12  230  50 - 60  Induction  1700 W  463.0  210.0  Buy Now

Stands

Catalog Number Model No. Description Weight
lb. kg
22563   Steel Cabinet  42  19.30  Buy Now
92457 100A  Universal Leg & Tray Stand  75  34.50  Buy Now
92462 150A  Universal Wheel & Tray Stand  103  46.70  Buy Now
92467 200A  Universal Wheel & Cabinet Stand  104  47.20  Buy Now

Die Heads

Catalog Number Model No. Description Capacity Weight
in. mm lb. kg
26132 711  Diehead, 711, SO Univ. L/Dies  1/4 - 2  6.4 - 50.8  12.2  5.6  Buy Now
26137 911  Universal Self-Opening R.H., BSPT  1/4 - 2  6.4 - 50.8  12.2  5.6  Buy Now
26142 713  Universal Quick-Opening L.H., NPT  1/4 - 2  64.0 - 102.0  12.2  5.6  Buy Now
26147 913  Universal Quick-Opening L.H., BSPT  1/4 - 2  6.4 - 50.8  12.2  5.6  Buy Now
26152 714  Diehead, 714 SO Recd L/Dies  2 1/2 - 4  6.4 - 50.8  30.0  13.6  Buy Now
26157 914  Receding Self-Opening R.H., BSPT  2 1/2 - 4  64.0 - 102.0  30.0  13.6  Buy Now
26162 541  Quick-Opening Bolt L.H./R.H.  1/4 - 1  6.4 - 25.4  7.5  3.4  Buy Now
26167 542  Quick-Opening Bolt L.H./R.H.  1 1/8 - 2  29.0 - 50.8  9.2  4.2  Buy Now
55447 725  Cut-Grooving Die Head  2 1/2 - 4  64.0 - 102.0  30.0  13.6  Buy Now
55452 766  Blade Type Cutter  3/4 - 4  64.0 - 88.9  21.0  9.5  Buy Now
57492   4" Grooving Die Set  * 2.2  1.0  Buy Now
57497   2 1/2"-3 1/2" Grooving Die Set  * 2 1/2 - 3 1/2  102.0  2.2  1.0  Buy Now
57502   4" Grooving Bit only  * Buy Now
57507   2 1/2"-3 1/2" Grooving Bit only  * 19.0 - 102.0  Buy Now
58712   Cut-Off Tool Bit  Buy Now
Note: Die Heads do not include dies. All Die Heads are through-head oiling

Pipe Dies

Catalog Number Description Capacity Weight
in. mm lb. kg
26192 Dies. 1224 2 - 1/2" - 4 NPT HS  2 1/2 - 4  62.0 - 100.0  2.2  1.0  Buy Now
33642 1224 H.S. Dies BSPT  2 1/2 - 4  62.0 - 100.0  2.2  1.0  Buy Now
31827 1224 H.S. NPT Dies for Plastic-Coated Pipe  2 1/2 - 4  62.0 - 100.0  2.2  1.0  Buy Now
31832 1224 H.S. BSPT Dies for Plastic-Coated Pipe  2 1/2 - 4  62.0 - 100.0  2.2  1.0  Buy Now
32237 1224 H.S. Dies NPT for PVC  2 1/2 - 4  62.0 - 100.0  2.0  1.0  Buy Now
32242 1224 H.S. Dies BSPT for PVC  2 1/2 - 4  62.0 - 100.0  2.0  1.0  Buy Now
33057 1224 H.S. Dies NPT for Stainless Steel  2 1/2 - 4  62.0 - 100.0  2.0  1.0  Buy Now
33072 1224 45˚ Beveling Dies  2 1/2 - 4  62.0 - 100.0  2.0  1.0  Buy Now
33077 1224 37 1⁄2˚ Beveling Dies  2 1/2 - 4  62.0 - 100.0  2.0  1.0  Buy Now
44992 1224 Bevel Guide Set  2 1/2 - 4  62.0 - 100.0  2.0  1.0  Buy Now
44997 1224 37 1⁄2˚ Bevel Bit Only  Buy Now
45002 1224 45˚ Bevel Bit Only  Buy Now

Accessories

 
Catalog Number Model No. Description Capacity Weight
in. mm lb. kg
51005 819  Nipple Chuck Complete, 1/2" - 2" NPT  0.5 - 2.0  6.0 - 50.0  10.5  4.8  Buy Now
61122 840A  Universal Drive Shaft  31.0  14.1  Buy Now
26187   Jaw Insert and Roll Set for PE-Coated Pipe  0.2  0.1  Buy Now
26212 764  1/4"-4" Wheel-Type Cutter  19.0  8.6  Buy Now
26217 744  1/4"-4" Blade-Type Reamer  13.0  5.9  Buy Now
26707   Gear Grease (1224 & 1822)  1.0  0.5  Buy Now
34157 419  Nipple Chuck 2 1/2" NPT  5.5  2.5  Buy Now
34162 419  Nipple Chuck 3" NPT  5.5  2.5  Buy Now
34167 419  Nipple Chuck 4" NPT  5.5  2.5  Buy Now
34172 419  Nipple Chuck 21/2" BSPT  5.5  2.5  Buy Now
34177 419  Nipple Chuck 3" BSPT  5.5  2.5  Buy Now
34182 419  Nipple Chuck 4" BSPT  5.5  2.5  Buy Now
34577   1/4"-4" Reamer Blade  0.5  0.2  Buy Now
Product:
Close
An error occurred while retrieving the distributors. Please try again.
Online Stores
Find a Store Near You
An error occurred while retrieving the distributors. Please try again.

Request Information

Rated 4.8 out of 5 by 8 reviewers.
Rated 5 out of 5 by The best threader i have used We have been using the 1224 steady for the last 3 years rigging up buildings for the drilling industry. It stands up to many different users and just keeps plugging away. We have not had any issues with the machine. I have instituted a preventitive maintinance program at our facility and I feel that the regular inspections and upkeep keep our machine like new even though it runs upwards of 20 hours a day. I would recomend the Rigid 1224 Threading machine to everyone. November 25, 2014
Rated 5 out of 5 by This unit meet and exceeded expectations We have owned the 1224 for a while now, threading pipe from minimum size to maximum size without any issues. We have even purchased beveling dies which cut hours out of time required to bevel to meet ASME standards. Using the automatic release threading heads has eliminated any guess work of thread length preventing over threading of pipe. The nipple chucks have greatly increased our ability to complete custom pipe systems without waiting for delivery of custom size nipples, much less the cost of having nipples cut/threaded outside our control being eliminated. November 25, 2014
Rated 5 out of 5 by Heavy Duty This machine is awesome, reliable and give you what you expect out of it. operating it is a simple and practical. It's definitely a workhorse. So if you are looking for a machine this is for you. November 24, 2014
Rated 5 out of 5 by Fantastic I have been in the plumbing industry for over thirty eight years. I started with three way manual dies and have moved up through the years to the best available. The Ridgid 1224 is just that. I would not even think to support a product that I had questions about or to write a review. I have no problem here. I have used this on many projects. I instruct others on the proper use of this equipment. It is simply the best and top of the line machine for this purpose. In the plumbing industry I consider myself one of the best of the best, I would not tarnish my reputation by supporting a product that was not able to preform to the expectations of the professional tradesman. You would not go wrong with this investment. November 24, 2014
Rated 5 out of 5 by Just a great all around machine. We now have 3 of these and mostly make 2.5 and 4.0 thread nipples with them. However we make some other pipe nipples and parts for several customers with little effort, the cleanliness, easy to put away, and general safety of the machine works well for our uses.. Next is to put a small pipe roll groovers on them for expanded customer product offerings. I would recommend this for any job or project that needs a fair amount of threaded sch 40 or thicker pipe. . November 24, 2014
Rated 5 out of 5 by Great for our shop This threader works great, simple to use and gets the job done. Saves us so much time and money being able to cut and thread for jobs in advance. Critical piece of equipment for our company. November 24, 2014
Rated 3 out of 5 by Good Overall Automatic features are good. it makes the task at hand much easier. November 24, 2014
Rated 5 out of 5 by Durable, well-built machine for our industry. We couldn't get it done without these threading machines. November 24, 2014
1-8 of 8
2 Questions | 4 Answers

Product Q&A

 
 
Back >>
 
 
Reason - the adjustable dies are sometimes out of calibration - our mechanics want a non-adjustable EX. .5" npt , .75" npt, 1" npt, etc.
11 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about lwg360 is loaded.
Additional information about lwg360 could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
It sounds like you are looking for a mono die option but, we do not offer this for the model 1224 threader. If you have further questions or concerns please contact our Technical Support Department at 888-743-4333.

Thank you
RIDGID
11 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGID is loaded.
Additional information about RIDGID could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
I have not seen one, but adjustment is simple if place on the proper diameter indication and speed.
3 months ago
Customer avatar
by
New York, United States
Read all my Q&A
 
Please wait while more information about Trip is loaded.
Additional information about Trip could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
We never ran into this situation so I can't answer with a simple yes/no.
What we do is after noticing a little wear on the dies which is normal, is set, thread a sample check thread insertion in a fitting, then set and forget.
One thing we have run across in my time is a lot of different suppliers outsource the fittings and although they meet specs there is a generally accepted tolerance of thread depth/insertion.
We have found you can find a common neutral point between the fittings in hand we can set the thread depth/insertion to and it's not an issue then.
3 months ago
Customer avatar
by
Georgia, United States
Read all my Q&A
 
Please wait while more information about charlessr is loaded.
Additional information about charlessr could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Oil Capacity

I have had issues with the oil overflowing and I assume too much was put in. Is there a set amount to have in at all times or some reference point to add to?
1 month, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Shark is loaded.
Additional information about Shark could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The 1224 is capable of holding a full gallon of oil in its reservoir. The minimum level is to have the oil just cover the intake filter in the bottom of the reservoir. Below the main chip tray there is a secondary filtration pan that has a screen in it. I have seen this get clogged with sediment over time and it actually prevents the oil from draining back in to the sump and eventually overflows, I would suggest ensuring that this is cleaned as well
1 month, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RIDGIDSupport is loaded.
Additional information about RIDGIDSupport could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
1 of 1