For 2" to 8" (50-200mm) Drain and Sewer Lines

Features

  • The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster...better.
  • Wheels to the job site – sets up fast, cleans up fast.
  • Low-profile “B” frame design will fit most crawl spaces, loads and unloads from truck easily. Upright “A” frame features cable carrier storage during transport, ideal for in-house applications.
  • Equipped to run, easy to handle, 15-foot sections of 1 1/4" cable to clean 3" to 8" (32m-200mm) lines to 200 feet (61m).
  • Easy clutch jaw c hange-out adapts K-1500 to run 15-foot sections of 7/8" (4.6/22mm) cable through 2" to 4" lines up to 175 feet (50-100mm, 53m).
  • Equipped with 3/4 HP motor; 115V Models.
  • CSA approved.
  • Approved to UL standards (NRTLC).

Machine Options - A Frame

Catalog Number Model No. Description Voltage (V) Weight
lb. kg
23692 K-1500A  Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose  115  135  61.30 
23702 K-1500A  Machine with A-1 Mitt, A-12 Pin Key,and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-14) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set  * 115  256  116.10 
23712 K-1500A  Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set  * 115  256  116.10 
27592 K-1500A  Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set  * 240  256  116.10 
27612 K-1500A  Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose  240  135  61.30 
"A-369-X 1 1/4" Jaw Set

Machine Options -B Frame

Catalog Number Model No. Description Voltage (V) Weight
lb. kg
23697 K-1500B  Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose  115  135  61.30 
23707 K-1500B  Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-14) Cable Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set  115  256  116.10 
23717 K-1500B  Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set  115  256  116.10 
27597 K-1500B  Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set  230  256  116.10 
27617 K-1500B  Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose  230  135  61.30 
27637 K-1500B  Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set  240  256  116.10 
33922   K-1500B Special Kit  240  210  95.00 

Cables and Leaders

Catalog Number Model No. Description Weight
lb. kg
24226 C-11  15' Standard All- Purpose Wind 3/8" Pitch w/ Plastic Core, Good For 4" Traps  17 3/5  8.00 
25036 C-10 IC  15' Cable with Inner Core (4,6 m)  10  4.50 
62275 C-10  15' (4,6 m) All- Purpose Wind  9 1/2  4.30 
62280 C-11  15' (4,6 m) Standard All-Purpose Wind. 3⁄8" (10 mm) Pitch. Good for 4" (110 mm) Traps, 3" (75 mm) - 8" (200 mm) Lines  16  7.30 
62285 C-12  15' (4,6 m) Extra-Heavy- Duty Wind. 3⁄8" (10 mm) Pitch. Recommended For 4" (110 mm) - 10" (250 mm) Long Runs, No 4" (110 mm) Traps  19  8.60 
62295 C-14  15' (4,6) Extra-Flexible Wind. 1⁄2" (13 mm) Pitch. Recommended For 3" (75 mm) - 10" (250 mm) Lines Through Cleanout, No 4" (110 mm) Traps  16  6.80 
62300 C-15  15' (4,6) Extra-Flexible Wind. 1⁄2" (13 mm) Pitch. Recommended For 3" (75 mm) - 6" (150 mm) Lines Good for Traps  12  5.50 
63090 T-27  1 1⁄4" (32 mm) x 25" (63,5 cm) Leader  2 3/4  1.20 

Cable Kits

Catalog Number Model No. Description Weight
lb. kg
61625 A-61  Standard Equipment Tool Kit for K-60-SE, includes: –T-101 Straight Auger –T-102 Funnel Auger –T-107 Spade Cutter –T-125 Retrirving Auger –T-150-1 Sharktooth Cutter –A-3 Tool Box –A-12 Pin Key  3.60 
61630 A-62  Standard Equipment Cable Kit for K-60-SE, includes: – Five Sections C-10, 7⁄8" (22 mm) x 15' (4,6 m) Cable – A-8 Cable Carrier  43  19.50 

Accessories

Catalog Number Model No. Description Weight
lb. kg
59205 A-1  Left-Hand RIDGID Drain Cleaning Mitt  1/2  0.20 
59295 A-2  Right-Hand RIDGID Drain Cleaning Mitt  1/2  0.20 
59225 A-12  Pin Key For 1⁄2" (12 mm) Cable  1/2  0.20 
59240 A-17  Manhole Guide Pipe  23  10.40 
59300 A-20  8-Foot (2,4 m) Front Guide Hose Assembly  25  11.40 
59320 A-369X  1 1⁄4" (32 mm) Replacement Jawset  3/4  0.30 
59325 A-368X  7/8" Jaw Set  3/4  0.30 
59360 A-3  Tool Box  2.30 
59395 A-34-12  12-Foot (3,7 m) Rear Guide Hose  20  9.10 
59400 A-34-16  16-Foot (4,9 m) Rear Guide Hose  26 1/2  12.00 
59415 A-34-10  10-Foot (3,1 m) Rear Guide Hose  13 3/8  6.20 
59440 A-4  Trap Spoon (30", 76 cm)  1 3/4  0.80 
59470 A-8  Cable Carrier (Holds 75' (23 m) 7⁄8" (22 mm) Cable/C-10)  5 1/2  2.50 
59475 A-9  Cable Carrier 150-Foot (45,7) Capacity 11⁄4" (32 mm)  14  6.40 
62467 A-1HD  Heavy-Duty Left-Hand RIDGID Drain Cleaning Mitt  1/2  0.20 
62472 A-2HD  Heavy-Duty Right-Hand RIDGID Drain Cleaning Mitt  1/2  0.20 

Tools

Catalog Number Model No. Description Replac. Blade(s)
59480 T-11  “H” Cutter, 2 1⁄2" (65 mm)  97800 
59485 T-12  “H” Cutter, 3 1⁄2" (89 mm)  97945 
61770 T-15A  Expanding Cutter, 4" - 6" (110-150 mm)  62970 
61790 T-4  Heavy-Duty Funnel Auger 
61800 T-2  Heavy-Duty Straight Auger 
61825 T-15B  Expanding Cutter, 6" - 8" (150-200 mm)  62980 
61970 T-13  Sawtooth Cutter, 2 1⁄2" (65 mm)  98070 
61975 T-14  Sawtooth Cutter, 3 1⁄2" (89 mm)  98075 
62840 T-1  Straight Auger 
62845 T-10  Grease Cutter, 4 1⁄2" (114 mm)  97865 
63105 T-3  Funnel Auger 
63190 T-5  Straight Retrieving Auger 
63195 T-6  Funnel Retrieving Auger Run Machine In Reverse 
63200 T-7  Hook Auger 
63205 T-8  Grease Cutter, 2 1⁄2" (65 mm)  97920 
63210 T-9  Grease Cutter, 3 1⁄2" (89 mm)  97925 
59625 T-21  Spiral Sawtooth Cutter, 2 1⁄2" 
59765 T-24  4-Blade Cutter, 21⁄2" (65 mm)  97940 
59770 T-25  4-Blade Cutter, 3 1⁄2" (89 mm)  97975 
59775 T-26  4-Blade Cutter, 4 1⁄2" (114 mm)  97805 
59780 T-26A  4-Blade Cutter, 5 1⁄2" (140 mm)  97980 
61850 T-17  Spiral Bar Cutter, 6" (150 mm)  97955 
61855 T-18  Spiral Bar Cutter, 8" (200 mm)  97960 
61960 T-16  Spiral Bar Cutter, 4" (110 mm)  97855 
63075 T-22  Spiral Sawtooth Cutter, 3" 
63085 T-23  Spiral Sawtooth Cutter, 4" (110 mm)  97850 
63110 T-31  Chain Knocker, For 3"- 4" Pipe (75-110 mm)  97985 
63115 T-32  Chain Knocker, For 6" Pipe (150 mm)  97990 
63120 T-33  Chain Knocker, For 8" Pipe (200 mm)  97995 
63145 T-38  Flue Brush, 1 1⁄2" (40 mm) 
63150 T-39  Flue Brush, 2" (50 mm) 
63155 T-40  Flue Brush, 2 1⁄2" (65 mm) 
63160 T-41  Flue Brush, 3" (76 mm) 
63165 T-42  Flue Brush, 3 1⁄2" (89 mm) 
63170 T-43  Flue Brush, 4" (110 mm) 
63175 T-44  Flue Brush, 4 1⁄2" (114 mm) 
63180 T-46  Flue Brush, 5 1⁄2" (140 mm) 
63185 T-47  Flue Brush, 6" 
63240 T-45  Flue Brush, 5" (127 mm) 
98030 T-50  Three Blade 3-4-5" (75-110-127 mm) 
98035 T-50-1  Sharktooth Cutter, 3" (75 mm)  98005 
98040 T-50-2  Sharktooth Cutter, 4" (110 mm)  98010 
98045 T-50-3  Sharktooth Cutter, 5" (127 mm)  98015 

Request Information