Toggle navigation

K-1500SP Sectional Machine

K-1500SP Sectional Machine

The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. Low-profile “B” frame design will fit most crawl spaces. Loads and unloads from truck easily. Upright “A” frame features cable carrier storage during transport, ideal for in-house applications.

Show Less
Read More
Buy Now
Request a Demo
Request Info
Register Your Product
Buy Parts

Features

  • The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster and better.
  • Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 600 RPM Release handle, cable stops instantly.
  • Wheels to the job site – sets up fast, cleans up fast.
  • Equipped to run, easy to handle, 15' (4.6 m) sections of 1 1⁄4" (32 mm) cable to clean 3" (75 mm) to 10" (250 mm) lines to 300' (91 m).
  • Easy clutch jaw change-out adapts K-1500 to run 15' (4.6 m) sections of 7⁄8" (22 mm) cable through 2" (50 mm) to 4" (110 mm) lines up to 175' (53 m).
  • Equipped with full 1 HP (1700W - EU) motor and heavy-duty rotary switch.
  • 10" solid ball bearing wheels.
  • Low profile frame design will fit most crawl spaces
  • Includes A-1 RIDGID® drain cleaning mitt and operators manual
  • Approved by CSA to CSA and UL Standards (115V/230V)

Ordering Information

Machine Options -B Frame
{{model}}
Catalog Number Model No. Description Voltage (V) Weight
lb. kg
43507 K-1500SP  K-1500SP-B 120V-60Hz Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose  115  141  64  Buy Now
46907 K-1500SP  K-1500SP-B 120V-60Hz Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose, A-34-12 Rear Guide Hose, 150' (45.7m), Ten Sections of C-11, 1 1/4" (32 mm) Cable, Three A-8 Cable Carriers, A-3 Tool Box, Eight-Piece 1 1/4" (32 mm) Tool Package  115  317  144  Buy Now
91027 K-1500SPB  K-1500SP-B 120V-60Hz Machine with A-1 RIDGID Drain Cleaning Mitt and A-12 Pin Key Plus : - A-34-12 Rear Guide Hose - C-14 Three Carrier Cable Combination Kit  115  297  135  Buy Now
Machine Options - A Frame
{{model}}
Catalog Number Model No. Description Voltage (V) Weight
lb. kg
46837 K-1500SPA  K-1500SP-A 120V Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose  115  150  68  Buy Now
46902 K-1500SPA  K-1500SP-A 120V Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose, A-34-12 Rear Guide Hose, 150' (45.7), Ten Sections of C-11, 1 1/4" (32 mm)Cable, Three A-8 Cable Carriers, A-3 Tool Box, Eight-Piece 1 1/4" (32 mm) Tool Package  115  326  148  Buy Now
91032 K-1500SPA  120V Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose & C-14 Three Carrier Cable Combination Kit  115  317  144  Buy Now
45317 K-1500SP-A  Machine with A-1 RIDIGD Drain Cleaning Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus SE Tool Kit (see below).  230  254  120  Buy Now
Cables and Leaders
{{model}}
Catalog Number Model No. Description Weight
lb. kg
24226 C-11 PC  15' (4,6 m) Standard All- Purpose Wind 3/8" Pitch with Plastic Core, Good For 4" Traps  17 3/5  8.0  Buy Now
25036 C-10 PC  7/8" (22 mm) x 15' Cable with Inner Core (4,6 m)
  		10  4.5  Buy Now
62275 C-10  7/8" (22 m) x 15' (4,6 m) All- Purpose Wind   9 1/2  4.3  Buy Now
62280 C-11  1 1/4" (32 mm) x 15' (4,6 m) Standard All-Purpose Wind. 3⁄8" (10 mm) Pitch. Good for 4" (110 mm) Traps, 3" (75 mm) - 8" (200 mm) Lines  16  7.3  Buy Now
62285 C-12  15' (4,6 m) Extra-Heavy- Duty Wind. 3/8" (10 mm) Pitch. Recommended For 4" (110 mm) - 10" (250 mm) Long Runs, No 4" (110 mm) Traps  19  8.6  Buy Now
62295 C-14  15' (4,6 m) Heavy-Duty Wind. 1/2" (13 mm) Pitch. Recommended For 3" (75 mm) - 10" (250 mm) Lines Through Cleanout, No 4" (110 mm) Traps   16  6.8  Buy Now
62300 C-15  15' (4,6) Extra-Flexible Wind. 1⁄2" (13 mm) Pitch. Recommended For 3" (75 mm) - 6" (150 mm) Lines Good for Traps  12  5.5  Buy Now
63090 T-27  1 1⁄4" (32 mm) x 25" (63,5 cm) Leader  2 3/4  1.2  Buy Now
Accessories

{{model}}
Catalog Number Model No. Description Weight
lb. kg
59205 A-1  Left-Hand RIDGID Drain Cleaning Mitt  1/2  0.2  Buy Now
59225 A-12  1/2" Cable Pin Key  1/2  0.2  Buy Now
59240 A-17  Manhole Guide Pipe  23  10.4  Buy Now
59295 A-2  Right-Hand RIDGID Drain Cleaning Mitt  1/2  0.2  Buy Now
59320 A-369X  Jaw Assembly 1-1/4" Cable  3/4  0.3  Buy Now
59325 A-368X  Jaw Assembly 7/8" Cable  3/4  0.3  Buy Now
59360 A-3  Tool Box  5  2.3  Buy Now
59395 A-34-12  12-Foot (3,7 m) Rear Guide Hose  20  9.1  Buy Now
59400 A-34-15  15-Foot (4,9 m) Rear Guide Hose  20 3/4  9.4  Buy Now
59415 A-34-10  10-Foot (3,1 m) Rear Guide Hose  13 3/8  6.2  Buy Now
59440 A-4  Trap Spoon (30", 76 cm)  1 3/4  0.8  Buy Now
59470 A-8  Cable Carrier 60' (18 m) Capacity 1 1/4" (32 mm)  5 1/2  2.5  Buy Now
59475 A-9  Cable Carrier 150-Foot (45,7) Capacity 11⁄4" (32 mm)  14  6.4  Buy Now
61708   Sectional Cable Carrier  33  15.0  Buy Now
  • Complete carrier stand including plastic drum
61713   Sectional Cable Drum  15  6.8  Buy Now
  • Plastic drum with support disk and drain plug
61718   Trident Cable Decoupler  3/4  0.3  Buy Now
62467 A-1HD  Heavy-Duty Left-Hand RIDGID Drain Cleaning Mitt  1/2  0.2  Buy Now
62472 A-2HD  Heavy-Duty Right-Hand RIDGID Drain Cleaning Mitt  1/2  0.2  Buy Now
Tools
{{model}}
Catalog Number Model No. Description Replac. Blade(s)
59480 T-11  “H” Cutter, 2 1⁄2" (65 mm)  97800  Buy Now
59485 T-12  “H” Cutter, 3 1⁄2" (89 mm)  97945  Buy Now
59625 T-21  Spiral Sawtooth Cutter, 2 1⁄2" (65 mm)  97970  Buy Now
59765 T-24  4-Blade Cutter, 21⁄2" (65 mm)  97940  Buy Now
59770 T-25  4-Blade Cutter, 3 1⁄2" (89 mm)  97975  Buy Now
59775 T-26  4-Blade Cutter, 4 1⁄2" (114 mm)  97805  Buy Now
61770 T-15A  Expanding Cutter, 4" - 6" (110-150 mm)  62970  Buy Now
61790 T-4  Heavy-Duty Funnel Auger  -  Buy Now
61800 T-2  Heavy-Duty Straight Auger  -  Buy Now
61960 T-16  Spiral Bar Cutter, 4" (110 mm)  97855  Buy Now
61970 T-13  Sawtooth Cutter, 2 1⁄2" (65 mm)  98070  Buy Now
62840 T-1  Straight Auger  -  Buy Now
62845 T-10  Grease Cutter, 4 1⁄2" (114 mm)  97865  Buy Now
63075 T-22  Spiral Sawtooth Cutter, 3" (75 mm)  97970  Buy Now
63085 T-23  Spiral Sawtooth Cutter, 4" (110 mm)  97850  Buy Now
63105 T-3  Funnel Auger  -  Buy Now
63110 T-31  Chain Knocker, For 3"- 4" Pipe (75-110 mm)  97985  Buy Now
63115 T-32  Chain Knocker, For 6" Pipe (150 mm)  97990  Buy Now
63145 T-38  Flue Brush, 1 1⁄2" (40 mm)  -  Buy Now
63160 T-41  Flue Brush, 3" (76 mm)  -  Buy Now
63165 T-42  Flue Brush, 3 1⁄2" (89 mm)  -  Buy Now
63190 T-5  A-3565 Key  -  Buy Now
63195 T-6  Funnel Retrieving Auger Run Machine In Reverse  -  Buy Now
63200 T-7  Hook Auger  -  Buy Now
63205 T-8  Grease Cutter, 2 1⁄2" (65 mm)  97920  Buy Now
63210 T-9  Grease Cutter, 3 1⁄2" (89 mm)  97925  Buy Now
63240 T-45  Flue Brush, 5" (127 mm)  -  Buy Now
98030 T-50  Includes 3 Sizes: 3-4-5" (75-110-127 mm)  -  Buy Now
98035 T-50-1  Sharktooth Cutter, 3" (75 mm)  98005  Buy Now
98040 T-50-2  Sharktooth Cutter, 4" (110 mm)  98010  Buy Now
98045 T-50-3  Sharktooth Cutter, 5" (127 mm)  98015  Buy Now
Contact Us
Have comments or questions? We'd love to hear from you.
Product Registration
RIDGID Tools are backed by the best coverage in the industry.