Read More
{{noResults}}
{{$index + 1}}.
{{wtbVendor.Name}}
{{wtbVendor.Distance}}
Directions: To Here - From Here
Call for Availability
{{wtbVendor.Distance}}
Directions: To Here - From Here
Call for Availability
{{wtbVendor.AddressLine1}}
{{wtbVendor.AddressLine2}}
{{wtbVendor.CityStatePostalCode}}
{{wtbVendor.CountryName}}
Tel: {{wtbVendor.Phone}}
{{wtbVendor.Website}}
{{wtbVendor.AddressLine2}}
{{wtbVendor.CityStatePostalCode}}
{{wtbVendor.CountryName}}
Tel: {{wtbVendor.Phone}}
{{wtbVendor.Website}}
({{resultCount}} results)
Features
- The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
- An induction motor helps minimize noise.
- A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.
- 1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads.
- Constant and proper lubrication of dies and workpiece with through-head oiling.
Specifications
| Nominal Pipe Capacity | 1/4"-2" (6mm-100mm) @ 36 RPM, 2-1/2"-4" (65mm-100mm) @ 12 RPM, 4"-6" (100mm-150mm) with 161 Geared Threader. |
| Bolt Capacity | 1/4"-2" (6mm-50mm). |
| Motor Control | Reverse/off/forward, heavy-duty rotary-type and integral foot switch. |
| Gear Box | Two-speed gear box with a 3:1 ratio. |
| Chuck | Hammer-type with replaceable rocker-action jaw inserts. |
| Rear Centering Device | Cam action. |
| Oiling Pump | Self-priming, gerotor-type, automatic-reversing, constant-flow. |
| Oiling | Through die head |
Support Documents
Catalog Sheet
1224 Threading Machine Cat Sheet
(954.66 KB)
Operator's Manual
1224 Threading Machine Operator's Manual
(2.04 MB)
Parts List
1224 Threading Machine Parts List
(750.14 KB)
711 and 911 Die Head Parts List
(152.33 KB)
Instruction Sheet
725 Cut-Grooving Die Head Instructions
(1.11 MB)
766 Blade Type Cutter Instruction Sheet
(2.21 MB)
Warranty
Ordering Information
| Catalog Number | Model No. | Description | Die Head | RPM | Voltage (V) | Frequency (Hz) | Phase | Motor Type | Amp Draw (A) | Power | Weight | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| lb. | kg | ||||||||||||
| 26092 | 1224 | 1/2" - 4" NPT Hammer Chuck Machine | 711/714 | 36/12 | 120 | 60 | 1 | Induction | 15 | 1 1/2 HP | 509.0 | 231.0 | |
| 26097 | 1224 | 1/2" - 4" NPT Hammer Chuck Machine | 711/714 | 36/12 | 230 | 60 | 1 | Induction | 8 | 1 1/2 HP | 509.0 | 231.0 | |
| 26127 | 1224 | 1/2" - 4" BSPT Hammer Chuck Machine | 911/914 | 36/12 | 120 | 60 | 1 | Induction | 15 | 1 1/2 HP | 509.0 | 231.0 | |
| 26112 | 1224 | 1/2" - 4" BSPT Hammer Chuck Machine | 911/914 | 36/12 | 115 | 50 | 1 | Induction | 15 | 1700 W | 463.0 | 210.0 | |
| 26122 | 1224 | 1/2" - 4" BSPT Hammer Chuck Machine | 911/914 | 36/12 | 230 | 60 | 1 | Induction | 8 | 1700 W | 509.0 | 231.0 | |
| 31442 | 1224 | 1/2" - 4" NPT Hammer Chuck Machine | 711/714 | 36/12 | 230 | 50 | 1 | Induction | 8 | 1700 W | 463.0 | 210.0 | |
Stands
Die Heads
Note: Die Heads do not include dies. All Die Heads are through-head oiling
Pipe Dies
Accessories
| Catalog Number | Model No. | Description | Capacity | Weight | |||
|---|---|---|---|---|---|---|---|
| in. | mm | lb. | kg | ||||
| 51005 | 819 | 819 Nipple Chuck Complete, 1/2" - 2" NPT | 0.5 - 2.0 | 6.0 - 50.0 | 10.5 | 4.8 | |
| 61122 | 840A | 840A Universal Drive Shaft | - | - | 31.0 | 14.1 | |
| 26187 | Jaw Insert and Roll Set for PE-Coated Pipe | - | - | 0.2 | 0.1 | ||
| 26212 | 764 | 1/4"-4" Wheel-Type Cutter | - | - | 19.0 | 8.6 | |
| 26217 | 744 | 1/4"-4" Blade-Type Reamer | - | - | 13.0 | 5.9 | |
| 26707 | Transmission Grease, 1 Lb. | - | - | 1.0 | 0.5 | ||
| 34157 | 419 | Nipple Chuck 2 1/2" NPT | - | - | 5.5 | 2.5 | |
| 34162 | 419 | Nipple Chuck 3" NPT | - | - | 5.5 | 2.5 | |
| 34167 | 419 | Nipple Chuck 4" NPT | - | - | 5.5 | 2.5 | |
| 34172 | 419 | Nipple Chuck 21/2" BSPT | - | - | 5.5 | 2.5 | |
| 34177 | 419 | Nipple Chuck 3" BSPT | - | - | 5.5 | 2.5 | |
| 34182 | 419 | Nipple Chuck 4" BSPT | - | - | 5.5 | 2.5 | |
| 34577 | Reamer Blade 1/4" - 4" | - | - | 0.5 | 0.2 | ||
Model 1224 Threading Machine is rated
out of
5 by
9.
Rated 4 out of
5
by
ftcaron from
Easy to use and makes fast work of cutting & threading pipes
Unit cuts & threads pipe up to 4" easily, Unit arrived with broken switch and the company replaced it right away. No cost.
Date published: 2017-01-23
Rated 5 out of
5
by
abraham from
The best threader i have used
We have been using the 1224 steady for the last 3 years rigging up buildings for the drilling industry. It stands up to many different users and just keeps plugging away. We have not had any issues with the machine. I have instituted a preventitive maintinance program at our facility and I feel that the regular inspections and upkeep keep our machine like new even though it runs upwards of 20 hours a day. I would recomend the Rigid 1224 Threading machine to everyone.
Date published: 2014-11-25
Rated 5 out of
5
by
charlessr from
This unit meet and exceeded expectations
We have owned the 1224 for a while now, threading pipe from minimum size to maximum size without any issues. We have even purchased beveling dies which cut hours out of time required to bevel to meet ASME standards. Using the automatic release threading heads has eliminated any guess work of thread length preventing over threading of pipe. The nipple chucks have greatly increased our ability to complete custom pipe systems without waiting for delivery of custom size nipples, much less the cost of having nipples cut/threaded outside our control being eliminated.
Date published: 2014-11-25
Rated 5 out of
5
by
Trip from
Heavy Duty
This machine is awesome, reliable and give you what you expect out of it. operating it is a simple and practical. It's definitely a workhorse. So if you are looking for a machine this is for you.
Date published: 2014-11-25
Rated 5 out of
5
by
wrmiii from
Fantastic
I have been in the plumbing industry for over thirty eight years. I started with three way manual dies and have moved up through the years to the best available. The Ridgid 1224 is just that. I would not even think to support a product that I had questions about or to write a review. I have no problem here. I have used this on many projects. I instruct others on the proper use of this equipment. It is simply the best and top of the line machine for this purpose. In the plumbing industry I consider myself one of the best of the best, I would not tarnish my reputation by supporting a product that was not able to preform to the expectations of the professional tradesman. You would not go wrong with this investment.
Date published: 2014-11-25
Rated 5 out of
5
by
MLee from
Just a great all around machine.
We now have 3 of these and mostly make 2.5 and 4.0 thread nipples with them. However we make some other pipe nipples and parts for several customers with little effort, the cleanliness, easy to put away, and general safety of the machine works well for our uses.. Next is to put a small pipe roll groovers on them for expanded customer product offerings. I would recommend this for any job or project that needs a fair amount of threaded sch 40 or thicker pipe. .
Date published: 2014-11-24
Rated 5 out of
5
by
Street from
Great for our shop
This threader works great, simple to use and gets the job done. Saves us so much time and money being able to cut and thread for jobs in advance. Critical piece of equipment for our company.
Date published: 2014-11-24
Rated 3 out of
5
by
PipeGuy from
Good Overall
Automatic features are good. it makes the task at hand much easier.
Date published: 2014-11-24
Is there a stationary non-adjustable pipe die set for this pipe machine
Reason - the adjustable dies are sometimes out of calibration - our mechanics want a non-adjustable EX. .5" npt , .75" npt, 1" npt, etc.
We never ran into this situation so I can't answer with a simple yes/no.
What we do is after noticing a little wear on the dies which is normal, is set, thread a sample check thread insertion in a fitting, then set and forget.
One thing we have run across in my time is a lot of different suppliers outsource the fittings and although they meet specs there is a generally accepted tolerance of thread depth/insertion.
We have found you can find a common neutral point between the fittings in hand we can set the thread depth/insertion to and it's not an issue then.
Date published: 2015-01-24
Oil Capacity
I have had issues with the oil overflowing and I assume too much was put in. Is there a set amount to have in at all times or some reference point to add to?
I filled (1 Gal) my oil reservoir until i could see the level just below the small secondary screen and I had no problem with overflows. Also getting the angle of the machine correct was critical in keeping the oil in the machine. Initially our machine was level and the oil would run out of the back of the pipe but bumping the rear legs up a bit fixed that..
Date published: 2015-10-13
Can the Model 1224 put an NPT thread onto 4'' SCH pipe grade 316
Thanks for contacting RIDGID. This machine is able to do this thread, but you will need the stainless steel dies to accomplish it. The part number would be 33057 for the dies for 4" Stainless Steel pipe. Please let us know if you have any other questions.
Date published: 2016-04-12